Deinking Flotation Cell - Kadant Black Clawson - IIM-BC FLOTATORT MODEL: 50

Deinking Flotation Cell, IIM-BC FLOTATORT, Model: 50
Kadant Black Clawson

SPECIFICATION - MODEL: 50

Units: American Engineering (Metric)

DIMENSIONS (W x L x H):____________13.5' x 16.7' x 15.4' (4.2 m. x 5.1 m. x 4.7 m.)
VOLUME: __________________________13,000 gal. (50 m3)
WEIGHT - EMPTY: __________________ 31,000 lb. (14,000 kg)
WEIGHT - FULL: ____________________ 143,000 lb. (65,000 kg)
FLOW RANGE: _____________________ 650-1500 gpm (2.45-5.65 m3/min)
RETENTION TIME RANGE: ___________ 8.7 to 20 minutes
CAPACITY RANGE AT 1.0% FEED: ____ 40 to 90 ODST/D (36 to 82 ODMt/D)
CAPACITY RANGE AT 1.2% FEED: ____ 48 to 108 ODST/D (44 to 98 ODMt/D)
MAX. AIR FLOW: ____________________1000 CFM (30 m3/min)
TYPICAL STOCK FLOW: _____________ 1200 gpm (4.5 m3/min)
TYPICAL RETENTION TIME: __________11 min. approx.
TYPICAL AIR FLOW: _________________800 CFM (22.5 m3/min)
TYPICAL AIR to STOCK RATIO: _______ 5.0:1
BLOWER POWER AT TYP. AIR FLOW: _ 40 hp (30 kW)
NUMBER OF TURBINES: _____________Two (2)
TURBINE POWER: __________________ 60 hp (both) (50 kW (both))
TURBINE SPEED: ___________________640 rpm
SKIMMER POWER: __________________1 hp (0.75 kW)
NUMBER OF BLADES: _______________Four (4)
SEAL WATER FLOW PER CELL: _______12 gpm (45 lpm)
SHOWER FLOW: ____________________30-50 gpm (115-190 lpm)
FEED FLANGE DIAMETER: ___________12" (300 mm)
ACCEPT FLANGE DIAMETER: ________ 12" (300 mm)
REJECT FLANGE DIAMETER: _________18" (450 mm)
AIR PIPING DIAMETER: ______________ 6" to 4" (150 mm to 100 mm)