PULPER - HYDRAPULPER - BLACK CLAWSON - 12' DIAM - 42" ROTOR

PULPER, HYDRAPULPER, BROCK PULPER UNIT REBUILT
12' HCV, 42" ROTOR
TUB IN 2 SECTION: 316 S/S, 65" HEIGHT, 12' DIAMETER, ¼" SIDE THICKNESS
TUB, BOTTOM 3/8" THICKNESS, S/S
DRIVE ASSEMBLY DWG CA3316
6 X SUPORTING LEGS, MTL: IRON 64" HIGH
WAS USED WITH A MOTOR 250 HP 1200 RPM
JUNK TRAP: 8"
DILUTION WATER INLET 8"
STOCK ACCEPT OUTLET: 12"
V DRIVER SHEAVE

Capacity: For newsprint re-pulping
Batch @ 6% consistency
With 65" tub height (actual configuration) 1000 LB of paper To match the capacity listed below the tub need to be higher, 41.5" is missing. the original measure (height) of this pulper tub is 106.5"

Capacity: For newsprint re-pulping
Batch @ 6% consistency
2500 LB of paper
19 800 L of water
pulping time: (± 5 min)
Discharge time: (± 4 min)