Dewatering, thickener

SCREW THICKENER, LAMORT, M-9
INCLINED EXTRACTOR SCREW, M-9
DEWATERING SCREWS LAMORT, M-9
MOTOR: 5.5 KW

SPLIT BASKET - THUNE EUREKA - SP-45
POSITION: 2 OR 3 - "LOW PRESSURE SIDE"
SCREEN PLATE:
HOLE 1.5MM (.050" )
17.3% O.A.
(1 SET SECTION SPLIT )
STAINLESS STEEL
STORE SURPLUS

THUNE PRESS PARTS SP45
SPARE PARTS FOR SCREW PRESS

SECTOR DISC FILTER-DORR OLIVER 12'
VALMET - GL&amp:V 212X4SC1 - 12'
DORR OLIVER 12' - BAGGED SECTOR WITHOUT BAG
QTY: 74
CONDITION: USED

SECTOR - DISC FILTER - DORR OLIVER - 12'
VALMET - GL&V: 212X4SC1 - 12'
DORR OLIVER 12' - SLOTTED BAGGED SECTOR WITHOUT BAG
CONDITION: USED
QTY: 2

SECTOR - DISC FILTER -  ANDRITZ - 12'
MANUFATURER: ANDRITZ - 212X4SC1 - 12'
DORR OLIVER 12' - BAGLESS
WEIGHT: 50LBS
CONDITION: STORE SURPLUS
QTY: 38

SECTOR - DISC FILTER - DORR OLIVER - 12'
VALMET - GL&V: 212X4SC1 - 12'
DORR OLIVER 12' - BAGLESS
QTY: 41
CONDITION: USED

SCREW-PRESS HOUSING - SPROUT BAUER - 575
MANUFACTURER: SPROUT BAUER
MODEL: 575
STAINLESS STEEL
MADE IN USA
WEIGHT: 140 LB
DIMENSION: 26.5" DIA X 8" HEIGHT
CONDITION: STORE SURPLUS

HM-75 SCREW THICKENER
Baskets: 1.4 mm holes
Capacity: 38 MT/day
Flow: 1000 L/min
Inlet Consistency: 2,60%
Outlet Consistency: 13%
Retention Rate: 90%
Operation Inlet Pressure: 2-3 psi

SCREW PRESS - THUNE - SP45

HYDRAULIC MOTOR - HAGGLUNDS MARATHON
MA 141 N 06 00
SERIAL #: 511 01522
DISPLACEMENT: 8890 CM3/R
MAX PRESSURE: 350 BAR
MAX SPEED: 63 R/MIN
TORQUE: 141 NM/BAR
WEIGHT: 990 KG

ELECTRIC MOTOR - WEG - 150 HP
150 HP
1785 RPM
VOLTS: 575
ENCLOSURE: TEFC
CODE: H
INSULATION: F
S.F: 1.15
CONDITION: USED

THUNE SCREW PRESS SP45L

Screw Press - FKC - SHX-800X6000L
Stainless Steel 316
Inlet: 8"
Outlet: 16"X47"
Drainage pipe connection: 8"
Drum shower connection: 2"
Pan shower connection: 1.5"

Motor - AC - G.E.
30hp
1175RPM
Frame: 326T
460Volts
3Ph - 60Hz

Gearbox - Ratio 319 to 1

Year: 2007
Condition: Used

SCREW - THUNE EUREKA - SP-45SL
MODEL: SP-45SL
MADE IN NORWAY
DIMENSION: 168" X 17"
CONDITION: USED

SCREW - THUNE EUREKA - SP-45SL
MODEL: SP-45SL
MADE IN NORWAY
DIMENSION: 168" X 17"
CONDITION: USED

POLCON VARGO SUPER DRUM FILTER, SIZE 4,
16' DRUM LENGTH, 8' DRUM DIAMTER, STAINLESS STEEL,
6-60 FPM PERIPHERAL SPEED, STAINLESS STEEL,
MODEL: 4

Overall dimension: 270" long, 114" Large, 120" high

PERFORATED ROLL (CYLENDER MOULD) - DECKER HYMAC - 150
S/S
ROLL FACE LENGTH: 196"
DIAMETER: 48"
TYPE: HOLES
HOLES DIAMETER: 3/8"
SHAFT DIMENSION 1 : 22-3/4" X 2-7/8"
SHAFT DIMENSION 2 : 17-1/2" X 3-1/8"
SHAFT IRON
DIMENSION: 236-1/4" X 48"
CONDITION: USED

PERFORATED ROLL (CYLENDER MOULD) - DECKER HYMAC - 150
S/S
ROLL FACE LENGTH: 196"
DIAMETER: 48"
TYPE: HOLES
HOLES DIAMETER: 3/8"
SHAFT DIMENSION 1 : 23-1/2" X 2-7/8"
SHAFT DIMENSION 2 : 16" X 3-1/8"
DIMENSION: 236-1/4" X 48"
CONDITION: USED

OUTLET HOUSING - THUNE EUREKA - SP32
STAINLESS STEEL
STORE SURPLUS

INLET HOUSING - THUNE PRESS - SP70 - THUNE EUREKA
READY FOR AN AXC70 ( INLET BEARING HOUSING WITH A SCREEN PLATE)
NORWAY BUILT
MODIFIED IN CANADA

OPTIONS AVAILABLE ($):
 - INLET SCREEN PLATE 1.5 MM DIA. OR 1.2 MM DIA DRILLED HOLES
 - ADAPTOR PLATE FOR THUNE INLET BEARING HOUSING TO REPLACE AXC70

TWIN WIRE PRESS, KVAERNER HYMAC, 80-MSL, DEWATERING BELT PRESS
MEDIUM PRESSURE TWIN WIRE PRESS

BASKET - SCREW PRESS - ANDRITZ
SLUDGE PRESS 19F-2005 ANDRITZ-RUTHER
MAT: STEEL INOX. 316-L
HOLE DIA: 3/4"
PLATE THICKENESS: 3/8"
HOLES C/C 1 1/8"
DIA INT: 36 1/4"
DIMENSIONS: 3/8"X37"X48 15/16 LG
MANUFACTURED FROM DRAWINGS #: 
M1900040A
M1900050A
COMPLETE WITH FRAME AND HARDWARE
MADE IN CANADA
WEIGHT: 1360 LBS
STORE SURPLUS