Paper mills equipment

PORTABLE FLOWMETER ELECTRONICS - UMFLUXUS - F6V4-4EN

FLUXUS G601, PORTABLE LIQUID FLOWMETER
Two fully-configurable flow channels standard
Transit-Time (Doppler enabled) NEMA 4x rated
LCD Display, Datalogger & RS232 output standard
Wall thickness measurement capable (sensor required)
Outputs: 2 x current PASSIVE
2 x solid state relays

FluxData software kit RS-232 cable, USB adapter
ONE Transducer chain mount and QuickFix pipe mount kit

14 to 17 hr internal re-chargeable battery,

Watertight transport case, user's manual & measuring tape
100 - 240acC Charging unit and power suppl

-----------------------------------------------------------------------------------------------

PAIR OF HIGHT TEMP. TYPE K PORABLE LIQUID CLAMP-ON
FLOW TRANSDUCERS
Pipe diameter range 4" to 142", with 16.4' cable
Temperature -40 to +266°F, includes coupling compound
Type: CDK1NZ7,

Calibration is traceable to NIST and A2LA/ISO 17025 accredited

-----------------------------------------------------------------------------------------------

TRANSDUCER CHAIN MOUNT KIT FOR TYPE Q & M/P
TRANSDUCERS

Learn More

MOTOR - AC - WEG - 25 HP
25HP
1760RPM
FRAME: 284T
208-230/460 VOLT
ENCLOSURE: TEFC
SERVICE FACTOR: 1.25
MODEL: W21 02518EP3E284T
INSULTATION CLASS: F
PHASE: 3 - HERTZ: 60
DUTY: CONT.
DESIGN: B
CODE: G
APPLICATION:HORIZONTAL - BELT
MADE IN BRAZIL
WEIGHT: 397LBS
*FOR PUMP SKU-50471*
CONDITION: USED

Learn More

AUTOMATIC CORE CUTTER - CORETECH -  CM 11
MODEL: CM 11
COMPUTER-CONTROLLED AUTOMATIC CORE CUTTE
CM 11/120 MACHINE FOR 120" LONG, 1"- 12" ID CORES
MATCHED CORE CHUCK, ANVIL AND TRIM EJECT RING FOR: 3", 4", 8" AND 12"
POWER: 230VAC/3PH/60HZ
AUTOMATIC CORE LOADER
REAR FEEDING OF CORES ONTO THE CORE LOADING TABLE
INCLUDING:

• CORE BUGGY
• CORE RECEPTACLE
• CONVEYOR
• SENSORS
• CONTROLS

Learn More

SCREENING DEVICE - PULMAC - MASTERSCREEN
MECHANICAL SEPARATOR FOR FIBERS / CONTAMINATES
CONDITION: USED

Learn More

CONVEYOR - STEEL BELT                  
INTERIOR WIDTH: 84.5"                   
EXTERIOR WIDTH: 92.25"                   
OVERALL LENGT : 92' 3" (1107")                  
WHEEL CENTER TO CENTER DISTANCE: 9"               
DISTANCE BETWEEN CENTER OF WHEEL AND THE
TOP OF HITCH : 2.875"                       
                                      
WHEELS DIMENSIONS                 
SEAT DIA: 4"                             
SHOULDER DIA: 5"             
BORE: 1.125"                
SHOULDER HEIGHT: 1/4"   
WHEEL THICKNESS: 2"

Learn More

CHAIN FOR PULPER CONVEYOR STEEL BELT                           
LINK WHEEL CENTER TO CENTER DISTANCE: 9.250"                                                             
WHEELS DIMENSIONS                 
SEAT DIA: 4"                             
SHOULDER DIA: 5"             
BORE: 1.125"                
SHOULDER HEIGHT: 1/4"   
WHEEL THICKNESS: 2"    
DISTANCE FROM THE CENTER OF WHEEL AND THE TOP OF HITCH : 2.875"   

Learn More

CHAIN FOR PULPER CONVEYOR STEEL BELT                           
LINK WHEEL CENTER TO CENTER DISTANCE: 9"                                                             
WHEELS DIMENSIONS                 
SEAT DIA: 3.5"                             
SHOULDER DIA: 4.5"             
BORE: 1-1/8"                
SHOULDER HEIGHT: 3/16"   
WHEEL THICKNESS: 1-3/4"    
DISTANCE FROM THE CENTER OF WHEEL AND THE TOP OF HITCH : 1"   

Learn More

DIESEL STANDBY GENERATOR - CATERPILLAR - 500 KW
CAT 3456
600 VOLT
12 LEAD
FULL ENCLOSURE
YEAR 2002

Learn More

BALL VALVE 2", GMR EMICO 500SF
CARBON STEEL SOCKET WELD
BODY: 1.0619
TRIM: 304 S/S
SEAT: CPTFE
T.F. REF: 05XT119
CLASS I/II: PN100
STORE SURPLUS

Learn More

MASS FLOW METER / TRANSMITTER CORIOLIS - ENDRESS+HAUSER
PROMASS 80F1
ORDER CODE: 80F1H-1888/0
80F1H-AAASAARABAAA
MEASURRING TUBE STAINLESS STEEL 
4" FLANGE

Learn More

AIR COMPRESSOR - SULLAIR - 32-25-300L

MODEL: 32-25-300L

300HP

1,750 CFM

S/N: 003-82567

25K HRS

Learn More

MOTOR - DC - ASEA 
1100 HP
980 RPM
FRAME: LAB450LC
ARM. VOLT: 600
FIELD VOLTS: 220 / 110
ARM. AMPS: 1450
FIELD AMPS: 10.2 / 20.4
MADE IN: SWEDEN

Learn More

Water Tube Boiler - Simoneau Techno Design - A155
Type: Watertube
155 000 LB/HRS
Model: A155
No. Projet: 270670
Design Press: 1724 KPog
S/N: 4656
Capacity BHP: 70 tons/hrs
Weight: 80,000Kg

New York Blower
Model: 54 BC
Capacity: 53 000 cfm
Fan description: HPBC FAN

Learn More

Watertube Boiler - Simoneau ThermoDesign
Model: AQT 80T
Type: Aquatube
S/N: 4415
Year: 2010
Burner : Riello
Model: RL100/M
Ratio min: 9 USGPH
Ratio max 32 USGPH 
Pressure: 160PSIG
BHP: 736 KW
Poids: 5,500lbs

Learn More

Watertube Boiler - Simoneau ThermoDesign
Model: AQT 80T
Type: Aquatube
S/N: 4416
Year: 2010
Burner : Riello
Model: RL100/M
Ratio min: 9 USGPH
Ratio max 32 USGPH 
Pressure: 160PSIG
BHP: 736 KW
Poids: 5,500lbs

Learn More

Volcano Steam - Generator
model: GV-50
Capacity: 50 000 LB/H

Learn More

INK PRINTING UNIT TESTER - I.G.T. AMSTERDAM
MODEL: AE
TYPE: 9.406.R.943
MADE IN HOLLAND
COONDITION: USED

Learn More

SHOCK ABSORBER - ENIDINE LH
MODEL: LH
PART #: SP 1817
SERIAL #: 16257
STORE SURPLUS

Learn More

TANK - S/S - 8.5' X 44' - 18 677 US GAL - 70 000 LITERS
HORIZONTAL SKID MOUNTED - S/S
CAPACITY: 18 677 US GAL - 70 000 LITERS
USED

Learn More

TANK - S/S - 8.5' X 44' - 18 677 US GAL - 70 000 LITERS
HORIZONTAL SKID MOUNTED - S/S
CAPACITY: 18 677 US GAL - 70 000 LITERS
USED

Learn More

Motor, General Eletric, Synchronous Motor
500hp
300 rpm
Frame 6335-J
4000v
Exc Volts 250
amp arm 72.2
amp field 29
500kva
serial # 8227675
Type TS
PF 0.8
3 Phase

Learn More

LINEAR SENSOR - Zerust Valeno
IDT/50/SS0345
S/S
50MM/5M

Learn More

LINEAR SENSOR - Zerust Valeno
IDT 50W
S/S
50MM/10M

Learn More

BALL VALVE - JAMESBURY - 2" 
FIGURE: 5150-31-3600-MT-B   
BODY: 316SST                
BALL: 316SST                
SEAT: MTFE                  
SHAFT: 316SST               
RATING CLASS: 150     

       
ACTUATOR - JAMESBURY, MODEL - ST50E
ACTION: LAST       

Learn More

BALL VALVE - JAMESBURY - 1 1/4"
BODY: SST                      
BALL: 316SST                   
SHAFT: 316SST                  
RATING CLASS: 150 PSI MAX      
FACE TO FACE: 3.750"           

ACTUATOR - JAMESBURY, MODEL: ST60-MSD

ACTION: LAST          

 POSITIONER: JAMESBURY
 TYPE: 32FX6          
 INPUT: 125/250/V.A.C.

Learn More

GATE VALVE MANUAL - WATTS REGULATOR - 4"
CODE: 70010                              
FLANGES                                  
IRON BODY                                
RESILIENT WEDGE                          
RATING CLASS: 200                        
MADE IN THAILAND                         
USED                                    

Learn More

PAPER BALE CLAMP - CASCADE - 70D-42089
SERIE #: 923176 IRO                    
FRAME DIMENSIONS: 60"W                 
CLAMP DIMENSIONS: 61"L         
Carriage Mount Dimension: Class IV - 23.44 in. (595.5 mm) 23.50 in. (597.0 mm)        
MATERIAL: STEEL                        
MADE IN CANADA                        

Learn More

Switch - SIEMENS - ID365 - 600V - 400A - 3PH
ELECTRICAL CABINET - SIEMENS    
INDUSTRIAL DUTY SWITCH          
CATALOGUE #: ID365              
600V AC/CA MAX.                 
400 AMPS                        
3 POLES                         
ENCLOSURE: 1 

WEIGHT: 90 LBS                     
OVERALL DIMENSIONS: 22.5"X4"X8.5"  
CONDITION: USED   

Learn More

LOAD HOOK - FOR RITE HITE DOK-LOK SYSTEM
MODEL #: SRH50                           
SERIAL #: 14679608022                    
MADE IN USA                              
WEIGHT: 250 LBS                          
OVERALL DIMENSIONS: 24"X24"X24"         

Learn More

LOAD HOOK - FOR RITE HITE DOK-LOK SYSTEM
MODEL #: SRH50                          
SERIAL #: 14679608023                   
MADE IN USA                             
WEIGHT: 250 LBS                         
OVERALL DIMENSIONS: 24"X24"X24" 
USED

Learn More

OVERHEAD CRANE - MUNCK 7.5 TON   
LIFTING SPEED: 13 FEET/MIN       
PART #: 25T1334                  
TYPE: 225-1326                   
9.6 HP                           
550 VOLTS                        
11.7 AMPS                        
60 HZ                            
LIFT: 29 FEET             

MOTOR - MUNCK 7.5 TON            
TYPE: 144-44                     
PART #: 216L-339                 
1.2 HP                           
Y 550 VOLTS                      
2.4 AMPS                         
60 HZ                            
LIFTING SPEED: 1.3 FEET/MIN      
RATING: SD PER CENT                

TROLLEY MOTOR - MUNCK   
TYPE: 144-83            
PART #: 228M3228        
1 HP                    
550 VOLTS TRI-PHASE (Y)
60 HZ                   
RATING: SD PER CENT           

MADE IN NORWAY                      
OVERALL DIMENSIONS: 80"X70"X45"     
CONDITION: 30-40%                       

Learn More

OVERHEAD CRANE HOIST - MUNCK 7.5 TON  
LIFTING SPEED: 13 FEET/MIN            
PART #: 25T1339                       
TYPE: 225-1326                        
9.6 HP                                
550 VOLTS                             
11.7 AMPS                             
60 HZ                                 
LIFT: 29 FEET       

MOTOR - MUNCK 7.5 TON         
TYPE: 144-44                  
PART #: 216L-338              
1.2 HP                        
Y 550 VOLTS                   
2.4 AMPS                      
60 HZ                         
LIFTING SPEED: 1.3 FEET/MIN  
RATING: SD PER CENT                              

TROLLEY MOTOR - MUNCK   
TYPE: 144-86            
PART #: 221M3225        
1 HP                    
550 VOLTS TRI-PHASE (Y)
60 HZ                   
RATING: SD PER CENT            

MADE IN NORWAY                    
OVERALL DIMENSIONS: 80"X70"X45"   

Learn More

OVERHEAD CRANE HOIST - MUNCK 2 X 7.5 TON
LIFTING SPEED: 13 FEET/MIN 
PART #: 25T1339 
TYPE: 225-1326 
9.6 HP 
550 VOLTS 
11.7 AMPS 
60 HZ 
LIFT: 29 FEET

TROLLEY MOTOR - MUNCK 
TYPE: 144-86 
PART #: 221M3225 
1 HP 
550 VOLTS TRI-PHASE (Y)
60 HZ 
RATING: SD

MADE IN NORWAY 
OVERALL DIMENSIONS: 80"X70"X45" 

Learn More

FLOWMETER - SIEMENS - 3"
MODEL: SITRANS F M MAG 3100 P
SERIES #: 7ME634 168001U312
SIZE DN: 80 (3")
CARBON STEEL
LINING: PFA
ELECTRODES: HASTELLOY C
PS MAX: 19 BAR/276 PSI - PS MIN: 0.01 BAR/0.145 PSI
TS MAX: 150°C/302 °F - TS MIN: -20°C/-4 °F
INPUT 60V MAX 0.12A MAX
YEAR OF MANUFACTURE: 2012
COMPONENTS OF France, ASSEMBLED IN THE USA Learn More

FLOWMETER - SIEMENS - 3"
MODEL: SITRANS F M MAG 3100 P
SERIES #: 7ME634 172301U352
SIZE DN: 80 (3")
CARBON STEEL
LINING: PFA
ELECTRODES: HASTELLOY C
PS MAX: 19 BAR/276 PSI - PS MIN: 0.01 BAR/0.145 PSI
TS MAX: 150°C/302 °F - TS MIN: -20°C/-4 °F
INPUT 60V MAX 0.12A MAX
YEAR OF MANUFACTURE: 2012
COMPONENTS OF France, ASSEMBLED IN THE USA Learn More

FLOWMETER - SIEMENS - 10"
MODEL #: SITRANS F M MAG 3100
SERIES #: 093840H122
SIZE DN: 250 (10")
FLANGE: ANSI B16.5 CLASS 150
LINING: PTFE
ELECTRODES: HASTELLOY C
PS MAX: 19 BAR/275 PSI - PS MIN: 0.3 BAR/4.35 PSI
TS MAX: 100°C/212 °F - TS MIN: -20°C/-4 °F
INPUT 60V MAX 0.125A MAX
YEAR OF MANUFACTURE: 2012
MADE IN: FRANCE Learn More

FLOWMETER - SIEMENS - 10"
MODEL #: SITRANS F M MAG 3100
SERIES #: 093640H122
SIZE DN: 250 (10")
FLANGE: ANSI B16.5 CLASS 150
LINING: PTFE
ELECTRODES: HASTELLOY C
PS MAX: 19 BAR/275 PSI - PS MIN: 0.3 BAR/4.35 PSI
TS MAX: 100°C/212 °F - TS MIN: -20°C/-4 °F
INPUT 60V MAX 0.125A MAX
YEAR OF MANUFACTURE: 2012
MADE IN: FRANCE Learn More

FLOWMETER - SIEMENS - 10"
MODEL #: SITRANS F M MAG 3100
SERIES #: 093740H122
SIZE DN: 250 (10")
FLANGE: ANSI B16.5 CLASS 150
LINING: PTFE
ELECTRODES: HASTELLOY C
PS MAX: 19 BAR/275 PSI - PS MIN: 0.3 BAR/4.35 PSI
TS MAX: 100°C/212 °F - TS MIN: -20°C/-4 °F
INPUT 60V MAX 0.125A MAX
YEAR OF MANUFACTURE: 2012
MADE IN: FRANCE Learn More

FLOWMETER - SIEMENS - 4"
MODEL: SITRANS F M MAG 3100 P
SERIES #: 7ME634 157101U212
SIZE DN: 100 (4")
CARBON STEEL
LINING: PFA
ELECTRODES: HASTELLOY C
PS MAX: 19 BAR/276 PSI - PS MIN: 0.01 BAR/0.145 PSI
TS MAX: 150°C/302 °F - TS MIN: -20°C/-4 °F
INPUT 60V MAX 0.12A MAX
YEAR OF MANUFACTURE: 2012
COMPONENTS OF France, ASSEMBLED IN THE USA Learn More

FLOWMETER - SIEMENS - 18"
MODEL #: SITRANS F M MAG 3100
SERIES #: 591440H123
SIZE DN: 450 (18")
FLANGE: ANSI B16.5 CLASS 150
LINING: PTFE
ELECTRODES: HASTELLOY C
PS MAX: 19 BAR/275 PSI - PS MIN: 0.3 BAR/4.35 PSI
TS MAX: 100°C/212 °F - TS MIN: -20°C/-4 °F
INPUT 60V MAX 0.125A MAX
YEAR OF MANUFACTURE: 2013
MADE IN: FRANCE Learn More

FLOWMETER - SIEMENS - 8"
MODEL #: SITRANS F M MAG 911/E
SERIES #: 7ME5610 103701Z394
SIZE DN: 200, NPS 8
FLANGE STD. ASME B16.5 150RF
LINING: PTFE
ELECTRODES: HASTELLOY C-276
PS MAX: 19.6 BAR/284 PSI - PS MIN: 0.3 BAR/4.4 PSI
TS MAX: 150°C/302 °F - TS MIN: -20°C/-4 °F
YEAR OF MANUFACTURE: 2014
INPUT 120V MAX - 3 A MAX
MADE IN: GERMANY

Learn More

FLOWMETER - SIEMENS - 12"
MODEL #: SITRANS F M MAG 3100
SERIES #: 094740H122
SIZE DN: 300 (12")
FLANGE: ANSI B16.5 CLASS 150
LINING: PTFE
ELECTRODES: HASTELLOY C
PS MAX: 19 BAR/275 PSI - PS MIN: 0.3 BAR/4.35 PSI
INPUT 60V MAX 0.125A MAX
YEAR OF MANUFACTURE: 2012
MADE IN: FRANCE Learn More

FLOWMETER - SIEMENS - 12"
MODEL #: SITRANS F M MAG 3100
SERIES #: 094940H122
SIZE DN: 300 (12")
FLANGE: ANSI B16.5 CLASS 150
LINING: PTFE
ELECTRODES: HASTELLOY C
PS MAX: 19 BAR/275 PSI - PS MIN: 0.3 BAR/4.35 PSI
TS MAX: 100°C/212 °F - TS MIN: -20°C/-4 °F
INPUT 60V MAX 0.125A MAX
YEAR OF MANUFACTURE: 2012
MADE IN: FRANCE Learn More

FLOWMETER - SIEMENS - 6"
MODEL: SITRANS F M MAG 3100 P
SERIES #: 7ME634 170901U352
SIZE DN: 150 (6")
CARBON STEEL
LINING: PFA
ELECTRODES: HASTELLOY C
PS MAX: 19 BAR/276 PSI - PS MIN: 0.01 BAR/0.145 PSI
TS MAX: 150°C/302 °F - TS MIN: -20°C/-4 °F
INPUT 60V MAX 0.12A MAX
YEAR OF MANUFACTURE: 2012
COMPONENTS OF France, ASSEMBLED IN THE USA Learn More

FLOWMETER - SIEMENS - 6"
MODEL: SITRANS F M MAG 3100 P
SERIES #: 7ME634 170801U352
SIZE DN: 150 (6")
CARBON STEEL
LINING: PFA
ELECTRODES: HASTELLOY C
PS MAX: 19 BAR/276 PSI - PS MIN: 0.01 BAR/0.145 PSI
TS MAX: 150°C/302 °F - TS MIN: -20°C/-4 °F
INPUT 60V MAX 0.12A MAX
YEAR OF MANUFACTURE: 2012
COMPONENTS OF France, ASSEMBLED IN THE USA Learn More

FLOWMETER - SIEMENS - 6"
MODEL: SITRANS F M MAG 3100 P
SERIES #: 7ME634 171901U352
SIZE DN: 150 (6")
CARBON STEEL
LINING: PFA
ELECTRODES: HASTELLOY C
PS MAX: 19 BAR/276 PSI - PS MIN: 0.01 BAR/0.145 PSI
TS MAX: 150°C/302 °F - TS MIN: -20°C/-4 °F
INPUT 60V MAX 0.12A MAX
YEAR OF MANUFACTURE: 2012
COMPONENTS OF France, ASSEMBLED IN THE USA Learn More

FLOWMETER - SIEMENS - 10"
MODEL #: SITRANS F M MAG 3100
SERIES #: 094040H122
SIZE DN: 250 (10")
FLANGE: ANSI B16.5 CLASS 150
LINING: PTFE
ELECTRODES: HASTELLOY C
PS MAX: 19 BAR/275 PSI - PS MIN: 0.3 BAR/4.35 PSI
TS MAX: 100°C/212 °F - TS MIN: -20°C/-4 °F
INPUT 60V MAX 0.125A MAX
YEAR OF MANUFACTURE: 2012
MADE IN: FRANCE Learn More

FLOWMETER - SIEMENS - 12"
MODEL #: SITRANS F M MAG 3100
SERIES #: 094640H122
SIZE DN: 300 (12")
FLANGE: ANSI B16.5 CLASS 150
LINING: PTFE
ELECTRODES: HASTELLOY C
PS MAX: 19 BAR/275 PSI - PS MIN: 0.3 BAR/4.35 PSI
TS MAX: 100°C/212 °F - TS MIN: -20°C/-4 °F
INPUT 60V MAX 0.125A MAX
YEAR OF MANUFACTURE: 2012
MADE IN: FRANCE Learn More

FLOWMETER - SIEMENS - 12"
MODEL #: SITRANS F M MAG 3100
SERIES #: 094840H122
SIZE DN: 300 (12")
FLANGE: ANSI B16.5 CLASS 150
LINING: PTFE
ELECTRODES: HASTELLOY C
PS MAX: 19 BAR/275 PSI - PS MIN: 0.3 BAR/4.35 PSI
TS MAX: 100°C/212 °F - TS MIN: -20°C/-4 °F
INPUT 60V MAX 0.125A MAX
YEAR OF MANUFACTURE: 2012
MADE IN: FRANCE Learn More

FLOWMETER - SIEMENS - 10"
MODEL #: SITRANS F M MAG 3100
SERIES #: 094440H122
SIZE DN: 250 (10")
FLANGE: ANSI B16.5 CLASS 150
LINING: PTFE
ELECTRODES: HASTELLOY C
PS MAX: 19 BAR/275 PSI - PS MIN: 0.3 BAR/4.35 PSI
TS MAX: 100°C/212 °F - TS MIN: -20°C/-4 °F
INPUT 60V MAX 0.125A MAX
YEAR OF MANUFACTURE: 2012
MADE IN: FRANCE Learn More