Paper mills equipment

SAND BLAST CABINET -  BLAST IT ALL
MODEL: 4836
WITH DUST BAG
DIM:48"W X 36"D X 36"H

MOTOR - AC - LEESON
1HP
3450RPM
VOLTS: 115/208-230
VOLTS: 115/208-230
SF: 1.15
60 HZ
ENCL: TEFC
DUTY: CONT

METAL CUTTING SAW - KALAMAZOO - MODELE: C300
SERIAL #: 082449001

ELECTRICAL MOTOR - ELECTRO ADDA
230 VOLTS
PHASE: 3 - HZ: 60
RPM: 804 - 1680
CONDITION: USED

WELDING MACHINE - MILLER - ECONOTIG
MODEL: ECONOTIG
SERIAL #: KF759558
CC-AC/DC WELDING POWER SOURCE
460 VOLTS
33 AMPS
1 PHASE
60 HZ
MADE IN USA
WEIGHT: 150 LBS
OVERALL DIMENSIONS: 25"X15"X20"
CONDITION: USED

PIPE THREADER - RIDGID - 300
MODEL: NO. 300
SERIAL #: 7553678
MADE IN USA
WEIGHT: 150 LBS
OVERALL DIMENSIONS: 48"X48"X40"H
CONDITION: USED

PALSMA CUTTER - ESAB - PCM 500i
MODEL: PCM 500i
SERIAL #: PL-J214026
STOCK #: 36304
CSA: LR30071 NRTL/C
208/230 VOLT UNIT
MADE IN USA
WEIGHT: 100 LBS
OVERALL DIMENSIONS: 24"X24"X42"H
CONDITION: USED

FLOOR FAN - CANARM - 36"
MANUFACTURER: CANARM
DIAMETER: 36"
SUPPLY: 120 VOLTS
2 SPEEDS - LOW-HIGH
ON WHEEL
CONDITION: USED

FLOOR FAN - CANARM - 36"
MANUFACTURER: CANARM
DIAMETER: 36"
SUPPLY: 120 VOLTS
2 SPEEDS - LOW-HIGH
ON WHEEL
CONDITION: USED

HYDRAULIC NUT
STEEL
EXTERIOR DIA: 26.375"
INTERIOR DIA: 20.125"
WEIGHT: 170 LBS
OVERALL DIMENSIONS: 26.375"X3.5"

JIB CRANE - O'BRIEN
CAPACITY: 1000 LBS
MADE IN CANADA
OVERALL DIMENSIONS: 107"H X 140"L

PNEUMATIC GREASE PUMP ALEMITE
ON CART
WEIGHT: 100 LB
DIM: 44"X20"X20"
MADE IN CANADA
USED

PNEUMATIC GREASE PUMP ALEMITE
ON CART
WEIGHT: 100 LB
DIM: 44"X20"X20"
MADE IN CANADA
USED

ROLLSADDLE CALIPER MEASURING TOLL
HERBERT SIGMA MODEL: 559772
USED
WEIGHT: 20 LB
DIM: 40"X12"X16"

WHEELS CART - 55" X 106" X 24"H

AUTOMATIC SELF LEVELING LIFT TALBE
PENTALIFT-PENTALOADER
MODEL: PL1
SERIAL #: 130140040
CAPACITY: 4500 LBS
MADE IN CANADA
WEIGHT: 700 LBS
OVERALL DIMENSIONS: 48"X42"X35"H

Roll Grinder - Farrell - 50/63" x 256"
Two-wheel roll capable of grinding all rolls
bed: 50/63" x 256" (1270 mm/1600 mm)
Rolls in beetwin 8" and 50" (1270 mm) can be ground on the centerline of the machine.
Rolls min size 8"
Rolls from 50" up to 63" are mounted above the centerline and are driven by a drive shaft.
Rolls up to 72"(1830 mm) in diameter can be ground above the centerline, by removing one wheel and guard.
Max Roll length 256" (6500 mm)
Grinding carriage travel is 280" (7110 mm), providing additional travel for roll set-up.
* size 8 type W rotoclone dust arrestor complete with suction pipes built into grinder carriage
* roll grooving attachment including grooving head
* 2 hydrostatic wheel spindles, 360 to 1062 RPM speed range
* Grinding wheels, 20" (508 mm) diameter x 3" (76 mm) face
* Carriage traverse drive, 30 to 1 speed range; 2" (51 mm) to 60" (1524 mm) per minute, infinitely variable.
* Cam type crowning and concaving device Range .400" crown, .400" concave, on diameter
* Approximate shipping weight: 57 540 kg
* Motors:
1 Motor 25 HP DC,
2 Motors 26 HP DC,
1 Motor 5 HP DC,
All tools included

RADIAL ARM DRILLING MACHINE - JET
MODEL #: JRD-1363
STOCK #: 320033
SERIAL #: 91151252
CAPACITY: 2 3/8 DRILL CAP. IN MILD STEEL
MOTOR: 5 H.P., 3 Ph., 220/440V (PREWIRED 220V)
13 3/4" COLUMN DIAMETER
63" SPINDLE TRAVEL ON ARM

MAX DRILL DIAMETER 50mm
MAX TRAVEL OF COLUMN1600mm
MAX HEIGHT 1250mm
#5 MT SPINDLE
****INCLUDES ALL TOOLING****

MICROMETER – STARRETT

MICROMETER: 12" to 16"

MICROMETER: 16" to 20"

MICROMETER: 20" to 24"

MICROMETER: 24" to 30"

MICROMETER: 30" to 36"

MICROMETER: 36" to 42"

MICROMETER: 42" to 48"

MICROMETER: 54" to 60"

HYDRAULIC NUT, TORRINGTON, HMVC-48

HYDRAULIC NUT, FAG, 200 INCH

HYDRAULIC NUT RKP 150

HYDRAULIC NUT, TORRINGTON, HPN A-84

LIFT TABLE, ECONO-LIFT - 4HD 60-80
TABLE DIM: 60" X 100"
CAPACITY: 8000 LB
60" LIFT
VOLTS: 575
SERIAL #: 101008

HEIGHT CLOSED = 13"
DOUBLE HYDRAULIC CYLINDER(2X)
NON INCLUDE/NON AVAIL: HYDRAULIC UNIT

SCISSOR LIFT TABLE MANUAL, DANDY
TABLE DIM: 35.500" X 20"
CAPACITY: 770 LBS
MAXIMUM HEIGHT: 45.750"
CLOSED HEIGHT: 13.750"
STROKE: 32"

43” PNEUMATIC BOLT CUTTERS
BRAND: PROYECSA
MODEL: RAPIDCUT – 8XL
REF: M60L
SERIAL # 5148
YEAR OF MANUFACTURING: 2013
COUNTRY OF MANUFACTURING: SPAIN
BRAND NEW – NEVER USED

38” PNEUMATIC BOLT CUTTERS
BRAND: PROYECSA
MODEL: RAPIDCUT – 6L
REF: C80L-AP
SERIAL #’S 5146 AND 5145
YEAR OF MANUFACTURING: 2013
COUNTRY OF MANUFACTURING: SPAIN
BRAND NEW – NEVER USED
2 AVAILABLE

VOLTAGE DETECTOR, CATU-PARIS, CL-36.07 CDN
RANGE OPERATING: 2.4-36 KV
TEST VOLTAGE: 75KV

PIEZ O TEST Separate testing device for phase comparator
Piezo-electric generator activated via a handle mechanism
providing a high frequency voltage.
Metal contact at the tip of the device. This contact may receive
the “banana” plug of the extension lead to facilitate testing on
very long detectors.
Earth socket at the base of the unit receiving a plug for making
closed-circuit tests.

WIRE MARKER PRINTER, LABEL PRINTER, BRADY, ID PRO PLUS
RECHARGEABLE BATTERY 110V

WATER CANNON, AKRON, STYLE: 3420
NUZZLES AKROMATIC 1000, STYLE: 5050
DISCHARGE PIPE, 2.5", STYLE: 3488
FIRE HOSE: