Effluent treatment

DEINKING FLOATATION CELL - IIM-BC FLOTATOR - BLACK CLAWSON
SERIAL #: 94-FC-0118
JOB #: 33571-91
.
SPECIFICATION - MODEL: 50
.
UNITS: AMERICAN ENGINEERING (METRIC)
.
DIMENSIONS (W x L x H):_____________13.5' x 16.7' x 15.4' (4.2 m. x 5.1 m. x 4.7 m.) 
VOLUME: __________________________13,000 gal. (50 m3) 
WEIGHT - EMPTY: __________________ 31,000 lb. (14,000 kg) 
WEIGHT - FULL: ____________________ 143,000 lb. (65,000 kg) 
FLOW RANGE: _____________________ 650-1500 gpm (2.45-5.65 m3/min) 
RETENTION TIME RANGE: ___________ 8.7 to 20 minutes 
CAPACITY RANGE AT 1.0% FEED: _____ 40 to 90 ODST/D (36 to 82 ODMt/D) 
CAPACITY RANGE AT 1.2% FEED: _____ 48 to 108 ODST/D (44 to 98 ODMt/D) 
MAX. AIR FLOW: ____________________1000 CFM (30 m3/min) 
TYPICAL STOCK FLOW: _____________ 1200 gpm (4.5 m3/min) 
TYPICAL RETENTION TIME: __________11 min. approx. 
TYPICAL AIR FLOW: _________________800 CFM (22.5 m3/min) 
TYPICAL AIR to STOCK RATIO: _______ 5.0:1 
BLOWER POWER AT TYP. AIR FLOW: _ 40 hp (30 kW) 
NUMBER OF TURBINES: _____________Two (2) 
TURBINE POWER: __________________ 60 hp (both) (50 kW (both)) 
TURBINE SPEED: ___________________640 rpm 
SKIMMER POWER: __________________1 hp (0.75 kW) 
NUMBER OF BLADES: _______________Four (4) 
SEAL WATER FLOW PER CELL: _______12 gpm (45 lpm) 
SHOWER FLOW: ____________________30-50 gpm (115-190 lpm) 
FEED FLANGE DIAMETER: ___________12" (300 mm) 
ACCEPT FLANGE DIAMETER: ________ 12" (300 mm) 
REJECT FLANGE DIAMETER: _________18" (450 mm) 
AIR PIPING DIAMETER: ______________ 6" to 4" (150 mm to 100 mm) 

DEINKING FLOATATION CELL - IIM-BC FLOTATOR - BLACK CLAWSON
MODEL: 50
SERIAL #: 94-FC-0121
JOB #: 33574-91
.
SPECIFICATION - MODEL: 50
.
UNITS: AMERICAN ENGINEERING (METRIC)
.
DIMENSIONS (W x L x H):_____________13.5' x 16.7' x 15.4' (4.2 m. x 5.1 m. x 4.7 m.) 
VOLUME: __________________________13,000 gal. (50 m3) 
WEIGHT - EMPTY: __________________ 31,000 lb. (14,000 kg) 
WEIGHT - FULL: ____________________ 143,000 lb. (65,000 kg) 
FLOW RANGE: _____________________ 650-1500 gpm (2.45-5.65 m3/min) 
RETENTION TIME RANGE: ___________ 8.7 to 20 minutes 
CAPACITY RANGE AT 1.0% FEED: _____ 40 to 90 ODST/D (36 to 82 ODMt/D) 
CAPACITY RANGE AT 1.2% FEED: _____ 48 to 108 ODST/D (44 to 98 ODMt/D) 
MAX. AIR FLOW: ____________________1000 CFM (30 m3/min) 
TYPICAL STOCK FLOW: _____________ 1200 gpm (4.5 m3/min) 
TYPICAL RETENTION TIME: __________11 min. approx. 
TYPICAL AIR FLOW: _________________800 CFM (22.5 m3/min) 
TYPICAL AIR to STOCK RATIO: _______ 5.0:1 
BLOWER POWER AT TYP. AIR FLOW: _ 40 hp (30 kW) 
NUMBER OF TURBINES: _____________Two (2) 
TURBINE POWER: __________________ 60 hp (both) (50 kW (both)) 
TURBINE SPEED: ___________________640 rpm 
SKIMMER POWER: __________________1 hp (0.75 kW) 
NUMBER OF BLADES: _______________Four (4) 
SEAL WATER FLOW PER CELL: _______12 gpm (45 lpm) 
SHOWER FLOW: ____________________30-50 gpm (115-190 lpm) 
FEED FLANGE DIAMETER: ___________12" (300 mm) 
ACCEPT FLANGE DIAMETER: ________ 12" (300 mm) 
REJECT FLANGE DIAMETER: _________18" (450 mm) 
AIR PIPING DIAMETER: ______________ 6" to 4" (150 mm to 100 mm) 

Deinking Flotation Cell, IIM-BC FLOTATORT, Model: 50
Kadant Black Clawson

HEAT EXCHANGER THERMAL TRANSFER C SERIES
MODEL: C-1736 90983
FOUR (4) PASS

RATING STANDARD FOR MAXIMUM:

PRESSURE SHELL SIDE: 300 PSI
PRESSURE TUBE SIDE: 150 PSI
TEMPERATURE: 300°F

MATERIALS C SERIES:
tubes Copper
Headers Steel
Shell Steel
Shell Connections Steel
Baff les Brass
end Bonnets Cast Iron
Mounting Brackets Steel
Gaskets Nitrile Rubber/Cellulose Fiber
nameplate Aluminum Foil

COOLER - CARON - O-C
LENGTH: 60", DIAMETER: 6"
INLET: 2"; NPT, OUTLET: 1 1/2"

COOLER - CARON - O-C
LENGTH: 48", DIAMETER: 6"
INLET: 2" NPT, OUTLET: 1 1/2"

COOLER - CARON - O-C
LENGTH: 48"
DIAMETER: 6"
INLET: 2"; NPT
OUTLET: 1 1/2" NPT

HEAT EXCHANGERS - BOWMAN - PK600
Model: 3170-8
Oil flow: 750 l/min
Water flow: 600 l/min
internal oil volume: 42 L
Internal water volume: 34 L
Total length: 70.39"
C.C. Oil inlet - outlet: 53.7"

QTY: 8

BLOWER, AERZEN, GM 60 S, POSITIVE DISPLACEMENT BLOWER FOR WASTE WATER TREATMENT
SERIAL #: 711867
CAPACITY OF:
60m³/min
2000 CFM
125 HP
93 KW
2970 RPM

MOTOR, US MOTOR, STORE SURPLUS
125 HP
1780 R.P.M. 1780
FRAME: 405T UP
VOLTS 575
SERIAL # C29008/X12X3070324R