Machine shop equipment

WHEELS CART - 55" X 106" X 24"H

WELDING MACHINE - MILLER - ECONOTIG
MODEL: ECONOTIG
SERIAL #: KF759558
CC-AC/DC WELDING POWER SOURCE
460 VOLTS
33 AMPS
1 PHASE
60 HZ
MADE IN USA
WEIGHT: 150 LBS
OVERALL DIMENSIONS: 25"X15"X20"
CONDITION: USED

WATER CANNON, AKRON, STYLE: 3420
NUZZLES AKROMATIC 1000, STYLE: 5050
DISCHARGE PIPE, 2.5", STYLE: 3488
FIRE HOSE:

VOLTAGE DETECTOR, CATU-PARIS, CL-36.07 CDN
RANGE OPERATING: 2.4-36 KV
TEST VOLTAGE: 75KV

PIEZ O TEST Separate testing device for phase comparator
Piezo-electric generator activated via a handle mechanism
providing a high frequency voltage.
Metal contact at the tip of the device. This contact may receive
the “banana” plug of the extension lead to facilitate testing on
very long detectors.
Earth socket at the base of the unit receiving a plug for making
closed-circuit tests.

SURFACE GRINDER - INGAR - RT-618-2A
MODEL : RT-618-2A

SAND BLAST CABINET -  BLAST IT ALL
MODEL: 4836
WITH DUST BAG
DIM:48"W X 36"D X 36"H

MOTOR - AC - LEESON
1HP
3450RPM
VOLTS: 115/208-230
VOLTS: 115/208-230
SF: 1.15
60 HZ
ENCL: TEFC
DUTY: CONT

ROLLSADDLE CALIPER MEASURING TOLL
HERBERT SIGMA MODEL: 559772
USED
WEIGHT: 20 LB
DIM: 40"X12"X16"

Roll Grinder - Farrell - 50/63" x 256"
Two-wheel roll capable of grinding all rolls
bed: 50/63" x 256" (1270 mm/1600 mm)
Rolls in beetwin 8" and 50" (1270 mm) can be ground on the centerline of the machine.
Rolls min size 8"
Rolls from 50" up to 63" are mounted above the centerline and are driven by a drive shaft.
Rolls up to 72"(1830 mm) in diameter can be ground above the centerline, by removing one wheel and guard.
Max Roll length 256" (6500 mm)
Grinding carriage travel is 280" (7110 mm), providing additional travel for roll set-up.
* size 8 type W rotoclone dust arrestor complete with suction pipes built into grinder carriage
* roll grooving attachment including grooving head
* 2 hydrostatic wheel spindles, 360 to 1062 RPM speed range
* Grinding wheels, 20" (508 mm) diameter x 3" (76 mm) face
* Carriage traverse drive, 30 to 1 speed range; 2" (51 mm) to 60" (1524 mm) per minute, infinitely variable.
* Cam type crowning and concaving device Range .400" crown, .400" concave, on diameter
* Approximate shipping weight: 57 540 kg
* Motors:
1 Motor 25 HP DC,
2 Motors 26 HP DC,
1 Motor 5 HP DC,
All tools included

REFRACTOMETER - EXTECH - RF18
SET OF 2
MADE IN: CHINA
WEIGHT: 4 LBS FOR 2
DIMENSIONS: 6X3X2
CONDITION: USED

RADIAL ARM DRILLING MACHINE - JET
MODEL #: JRD-1363
STOCK #: 320033
SERIAL #: 91151252
CAPACITY: 2 3/8 DRILL CAP. IN MILD STEEL
MOTOR: 5 H.P., 3 Ph., 220/440V (PREWIRED 220V)
13 3/4" COLUMN DIAMETER
63" SPINDLE TRAVEL ON ARM

MAX DRILL DIAMETER 50mm
MAX TRAVEL OF COLUMN1600mm
MAX HEIGHT 1250mm
#5 MT SPINDLE
****INCLUDES ALL TOOLING****

PNEUMATIC GREASE PUMP ALEMITE
ON CART
WEIGHT: 100 LB
DIM: 44"X20"X20"
MADE IN CANADA
USED

PNEUMATIC GREASE PUMP ALEMITE
ON CART
WEIGHT: 100 LB
DIM: 44"X20"X20"
MADE IN CANADA
USED

PIPE THREADING MACHINE - RIDGID - 535
SERIAL #: EBE07784 1206
VOLTS: 115
AMPS: 15
RPM: 36
MADE IN: USA
WEIGHT: 400 LBS
DIMENSIONS: 46X30X48
CONDITION: USED

PALSMA CUTTER - ESAB - PCM 500i
MODEL: PCM 500i
SERIAL #: PL-J214026
STOCK #: 36304
CSA: LR30071 NRTL/C
208/230 VOLT UNIT
MADE IN USA
WEIGHT: 100 LBS
OVERALL DIMENSIONS: 24"X24"X42"H
CONDITION: USED

OVEN FOR WELDING ELECTRODE - HENKEL INC - K-200
MODEL: K-200
VOLTS: 120
WATTS: 500
PH: 1
MADE IN USA
WEIGHT: 20LBS
DIMENSION: 18" X 16" X 24"
CONDITION: USED

MICROMETER – STARRETT

MICROMETER: 12" to 16"

MICROMETER: 16" to 20"

MICROMETER: 20" to 24"

MICROMETER: 24" to 30"

MICROMETER: 30" to 36"

MICROMETER: 36" to 42"

MICROMETER: 42" to 48"

MICROMETER: 54" to 60"

METAL CUTTING SAW - KALAMAZOO - MODELE: C300
SERIAL #: 082449001

ELECTRICAL MOTOR - ELECTRO ADDA
230 VOLTS
PHASE: 3 - HZ: 60
RPM: 804 - 1680
CONDITION: USED

WIRE MARKER PRINTER, LABEL PRINTER, BRADY, ID PRO PLUS
RECHARGEABLE BATTERY 110V

JIB CRANE - O'BRIEN
CAPACITY: 1000 LBS
MADE IN CANADA
OVERALL DIMENSIONS: 107"H X 140"L

HYDRAULIC TABLE - SOUTHWORTH - 36" X 48"
MODELE: TLLS4 - 36W
CAPACITY: 4000LBS
HEIGHT MAX: 42 3/4"
HEIGHT MIN: 6 3/4"
DIMENSION TABLE 36" X 48"
MOTOR: 1 HP
VOLT: 115/230
HZ: 50/60
PH: 1
SER F: 1.00
CODE: H
CLASSE: B
MADE IN USA
WEIGHT TOTAL: 650LBS
DIMENSION: 36 X 48 X 6.750
CONDITION: STORE SURPLUS

HYDRAULIC NUT, TORRINGTON, HPN A-84

HYDRAULIC NUT, TORRINGTON, HMVC-48

HYDRAULIC NUT - SKV - HMV 76B
CONDITION: USED

HYDRAULIC NUT - SKF - HMVC60
CONDITION: USED

HYDRAULIC NUT - SKF - HMVC 44E
CONDITION: USED

HYDRAULIC NUT - SKF - HMVC 19E
CONDITION: USED

HYDRAULIC NUT - SKF - HMV 28E
M140X2
MAX 80 MPA/11 600 PSI
MADE IN: GERMANY
WEIGHT: 20 LBS
DIMENSIONS: 8"X3"
CONDITION: STORE SURPLUS

HYDRAULIC NUT - SKF - HMV 17E
THREAD M85X2
MAX PRESSURE 60 MPA/ 8700 PSI
MADE IN: GERMANY
WEIGHT: 15 LBS
DIMENSIONS: 6"X2"
CONDITION: STORE SURPLUS

HYDRAULIC NUT
STEEL
EXTERIOR DIA: 26.375"
INTERIOR DIA: 20.125"
WEIGHT: 170 LBS
OVERALL DIMENSIONS: 26.375"X3.5"

HYDRAULIC NUT RKP 150

HYDRAULIC NUT, FAG, 200 INCH

HYDRAULIC NUT - FAG - RKP 290
CONDITION: USED

HYDRAULIC NUT - FAG - RKP 220
CONDITION: USED

HYDRAULIC NUT - FAG - RKP 210
CONDITION: USED

HYDRAULIC NUT - FAG - RKP 200
CONDITION: USED

HYDRAULIC NUT - FAG - RKP 170
CONDITION: USED

HYDRAULIC NUT - FAG - RKP 165
CONDITION: USED

HYDRAULIC NUT - FAG - RKP 160
CONDITION: USED

HYDRAULIC NUT - FAG - 75
CONDITION: USED

HYDRAULIC NUT - FAG - 400
CONDITION: USED

HYDRAULIC NUT - FAG - 380
CONDITION: USED

HYDRAULIC NUT - FAG - 235
CONDITION: USED

HYDRAULIC NUT - FAG - 235
CONDITION: USED

HYDRAULIC NUT - FAG - 235
CONDITION: USED

HYDRAULIC NUT - FAG - 190-E
CONDITION: USED