Paper mills equipment

WATER CANNON, AKRON, STYLE: 3420
NUZZLES AKROMATIC 1000, STYLE: 5050
DISCHARGE PIPE, 2.5", STYLE: 3488
FIRE HOSE:

MECHANICAL HYDRAULIC JACK, PARKER - 1 3/8"

PIPE BENDER, GREENLEE TOOL, 884
1¼" TO 4", HYRAULIC UNIT

SCALE, OHAUS, ES50L
CAPACITY: 110 LB / 50 KG
PRECISION: 0.05 LB / 0.02 KG
WEIGHT UNIT: kg, lb, oz
BASE SIZE: 20.5" x 15.750" x 3"
S/N: 06769756EH

WIRE MARKER PRINTER, LABEL PRINTER, BRADY, ID PRO PLUS
RECHARGEABLE BATTERY 110V

VOLTAGE DETECTOR, CATU-PARIS, CL-36.07 CDN
RANGE OPERATING: 2.4-36 KV
TEST VOLTAGE: 75KV

PIEZ O TEST Separate testing device for phase comparator
Piezo-electric generator activated via a handle mechanism
providing a high frequency voltage.
Metal contact at the tip of the device. This contact may receive
the “banana” plug of the extension lead to facilitate testing on
very long detectors.
Earth socket at the base of the unit receiving a plug for making
closed-circuit tests.

LIFT TABLE, ECONO-LIFT - 4HD 60-80
TABLE DIM: 60" X 100"
CAPACITY: 8000 LB
60" LIFT
VOLTS: 575
SERIAL #: 101008

HEIGHT CLOSED = 13"
DOUBLE HYDRAULIC CYLINDER(2X)
NON INCLUDE/NON AVAIL: HYDRAULIC UNIT

HYDRAULIC NUT, TORRINGTON, HPN A-84

HYDRAULIC NUT RKP 150

HYDRAULIC NUT, FAG, 200 INCH

HYDRAULIC NUT, TORRINGTON, HMVC-48

MICROMETER – STARRETT

MICROMETER: 12" to 16"

MICROMETER: 16" to 20"

MICROMETER: 20" to 24"

MICROMETER: 24" to 30"

MICROMETER: 30" to 36"

MICROMETER: 36" to 42"

MICROMETER: 42" to 48"

MICROMETER: 54" to 60"

RADIAL ARM DRILLING MACHINE - JET
MODEL #: JRD-1363
STOCK #: 320033
SERIAL #: 91151252
CAPACITY: 2 3/8 DRILL CAP. IN MILD STEEL
MOTOR: 5 H.P., 3 Ph., 220/440V (PREWIRED 220V)
13 3/4" COLUMN DIAMETER
63" SPINDLE TRAVEL ON ARM

MAX DRILL DIAMETER 50mm
MAX TRAVEL OF COLUMN1600mm
MAX HEIGHT 1250mm
#5 MT SPINDLE
****INCLUDES ALL TOOLING****

Roll Grinder - Farrell - 50/63" x 256"
Two-wheel roll capable of grinding all rolls
bed: 50/63" x 256" (1270 mm/1600 mm)
Rolls in beetwin 8" and 50" (1270 mm) can be ground on the centerline of the machine.
Rolls min size 8"
Rolls from 50" up to 63" are mounted above the centerline and are driven by a drive shaft.
Rolls up to 72"(1830 mm) in diameter can be ground above the centerline, by removing one wheel and guard.
Max Roll length 256" (6500 mm)
Grinding carriage travel is 280" (7110 mm), providing additional travel for roll set-up.
* size 8 type W rotoclone dust arrestor complete with suction pipes built into grinder carriage
* roll grooving attachment including grooving head
* 2 hydrostatic wheel spindles, 360 to 1062 RPM speed range
* Grinding wheels, 20" (508 mm) diameter x 3" (76 mm) face
* Carriage traverse drive, 30 to 1 speed range; 2" (51 mm) to 60" (1524 mm) per minute, infinitely variable.
* Cam type crowning and concaving device Range .400" crown, .400" concave, on diameter
* Approximate shipping weight: 57 540 kg
* Motors:
1 Motor 25 HP DC,
2 Motors 26 HP DC,
1 Motor 5 HP DC,
All tools included

HYDRAULIC NUT - FAG - 75
CONDITION: USED

HYDRAULIC NUT - SKF - HMVC 19E
CONDITION: USED

HYDRAULIC NUT - FAG - 95
CONDITION: USED

HYDRAULIC NUT - FAG - RKP 140
CONDITION: USED

HYDRAULIC NUT - FAG - 160
CONDITION: USED

HYDRAULIC NUT - FAG - 160
CONDITION: USED

HYDRAULIC NUT - FAG - RKP 170
CONDITION: USED

HYDRAULIC NUT - FAG - RKP 160
CONDITION: USED

HYDRAULIC NUT - FAG - RKP 165
CONDITION: USED

HYDRAULIC NUT - FAG - 190
CONDITION: USED

HYDRAULIC NUT - FAG - 190-E
CONDITION: USED

HYDRAULIC NUT - SKF - HMVC 44E
CONDITION: USED

HYDRAULIC NUT - FAG - RKP 200
CONDITION: USED

HYDRAULIC NUT - FAG - RKP 210
CONDITION: USED

HYDRAULIC NUT - FAG - 400
CONDITION: USED

HYDRAULIC NUT - FAG - 380
CONDITION: USED

HYDRAULIC NUT - SKV - HMV 76B
CONDITION: USED

HYDRAULIC NUT - FAG - RKP 290
CONDITION: USED

HYDRAULIC NUT - FAG - RKP 220
CONDITION: USED

HYDRAULIC NUT - FAG - 235
CONDITION: USED

HYDRAULIC NUT - FAG - 235
CONDITION: USED

HYDRAULIC NUT - FAG - 235
CONDITION: USED

HYDRAULIC NUT - SKF - HMVC60
CONDITION: USED

GAS POWERED VIBRATORY SCREED - STONE VS 800
MODEL: VS800
S/N: 1291194
BRIGGS AND STRATTON MODEL: 132232
GASOLINE MOTOR 5HP TYPE: 4036 03
*THE MOTOR NEED NEW GASKET AND CARTURATOR*
CONDITION: USED

HYDRALAULIC NUT - HMVC 46
HMVC 46
CONDITION: USED

HYDRALAULIC NUT - SKF - HMVC-56
HMVC 56
CONDITION: USED

HYDRALAULIC NUT - FAG - RKP 260
RKP 260
CONDITION: USED

HYDRALAULIC NUT - SKF - HMVC-46E
HMVC-46E
CONDITION: USED

HYDRALAULIC NUT - SKF - HMVC-44
HMVC-44
CONDITION: USED

HYDRAULIC TABLE - SOUTHWORTH - 36" X 48"
MODELE: TLLS4 - 36W
CAPACITY: 4000LBS
HEIGHT MAX: 42 3/4"
HEIGHT MIN: 6 3/4"
DIMENSION TABLE 36" X 48"
MOTOR: 1 HP
VOLT: 115/230
HZ: 50/60
PH: 1
SER F: 1.00
CODE: H
CLASSE: B
MADE IN USA
WEIGHT TOTAL: 650LBS
DIMENSION: 36 X 48 X 6.750
CONDITION: STORE SURPLUS

HEAT TRACER - 3M - IR-750C SERIES
MADE IN: USA
WEIGHT: 5 LBS
DIMENSIONS: 8X4X3
CONDITION: USED

PIPE THREADING MACHINE - RIDGID - 535
SERIAL #: EBE07784 1206
VOLTS: 115
AMPS: 15
RPM: 36
MADE IN: USA
WEIGHT: 400 LBS
DIMENSIONS: 46X30X48
CONDITION: USED

REFRACTOMETER - EXTECH - RF18
SET OF 2
MADE IN: CHINA
WEIGHT: 4 LBS FOR 2
DIMENSIONS: 6X3X2
CONDITION: USED

HYDRAULIC NUT - SKF - HMV 17E
THREAD M85X2
MAX PRESSURE 60 MPA/ 8700 PSI
MADE IN: GERMANY
WEIGHT: 15 LBS
DIMENSIONS: 6"X2"
CONDITION: STORE SURPLUS

HYDRAULIC NUT - SKF - HMV 28E
M140X2
MAX 80 MPA/11 600 PSI
MADE IN: GERMANY
WEIGHT: 20 LBS
DIMENSIONS: 8"X3"
CONDITION: STORE SURPLUS

OVEN FOR WELDING ELECTRODE - HENKEL INC - K-200
MODEL: K-200
VOLTS: 120
WATTS: 500
PH: 1
MADE IN USA
WEIGHT: 20LBS
DIMENSION: 18" X 16" X 24"
CONDITION: USED

HYDRALAULIC NUT - HMVC-48
HMVC-48
CONDITION: USED

SURFACE GRINDER - INGAR - RT-618-2A
MODEL : RT-618-2A

BATTERY CHARGER - HAWKER - PH3R-12-550
MODEL: PH3R-12-550
SERIAL #: LC137164
BATTERY TYPE: L-A
AMP./HOUR: 550
CELL NUMBER: 12
CHARGING TIME: 8H
INPUT: 480/550/600 VOLT - 5/5/4 AMP - 3PH - 60Hz
OUTPUT: 24 VDC - 105 AMP
MADE IN: USA
WEIGHT: 350 LBS
DIM: 27X25X24
CONDITION: USED

FOR ELECTRICAL PALLET TRUCK: SKU 69186

BELT TENSIONER KIT - GATES - SONIC TENSION METER
MANUFACTURER: GATES
MADE IN USA
WEIGHT: 110 LB
DIMENSION: 16"X12"X6"
CONDITION: USED

METAL CUTTING SAW - KALAMAZOO - MODELE: C300
SERIAL #: 082449001

ELECTRICAL MOTOR - ELECTRO ADDA
230 VOLTS
PHASE: 3 - HZ: 60
RPM: 804 - 1680
CONDITION: USED

WELDING MACHINE - MILLER - ECONOTIG
MODEL: ECONOTIG
SERIAL #: KF759558
CC-AC/DC WELDING POWER SOURCE
460 VOLTS
33 AMPS
1 PHASE
60 HZ
MADE IN USA
WEIGHT: 150 LBS
OVERALL DIMENSIONS: 25"X15"X20"
CONDITION: USED

PALSMA CUTTER - ESAB - PCM 500i
MODEL: PCM 500i
SERIAL #: PL-J214026
STOCK #: 36304
CSA: LR30071 NRTL/C
208/230 VOLT UNIT
MADE IN USA
WEIGHT: 100 LBS
OVERALL DIMENSIONS: 24"X24"X42"H
CONDITION: USED

HYDRAULIC NUT
STEEL
EXTERIOR DIA: 26.375"
INTERIOR DIA: 20.125"
WEIGHT: 170 LBS
OVERALL DIMENSIONS: 26.375"X3.5"

JIB CRANE - O'BRIEN
CAPACITY: 1000 LBS
MADE IN CANADA
OVERALL DIMENSIONS: 107"H X 140"L

PNEUMATIC GREASE PUMP ALEMITE
ON CART
WEIGHT: 100 LB
DIM: 44"X20"X20"
MADE IN CANADA
USED

PNEUMATIC GREASE PUMP ALEMITE
ON CART
WEIGHT: 100 LB
DIM: 44"X20"X20"
MADE IN CANADA
USED

ROLLSADDLE CALIPER MEASURING TOLL
HERBERT SIGMA MODEL: 559772
USED
WEIGHT: 20 LB
DIM: 40"X12"X16"

WHEELS CART - 55" X 106" X 24"H

AUTOMATIC SELF LEVELING LIFT TALBE
PENTALIFT-PENTALOADER
MODEL: PL1
SERIAL #: 130140040
CAPACITY: 4500 LBS
MADE IN CANADA
WEIGHT: 700 LBS
OVERALL DIMENSIONS: 48"X42"X35"H

SAND BLAST CABINET -  BLAST IT ALL
MODEL: 4836
WITH DUST BAG
DIM:48"W X 36"D X 36"H

MOTOR - AC - LEESON
1HP
3450RPM
VOLTS: 115/208-230
VOLTS: 115/208-230
SF: 1.15
60 HZ
ENCL: TEFC
DUTY: CONT