Pump

BACK PLATE - ALLIS-CHALMERS - PWO A2 - 17"
S/S 317 CF8M
NON STANDARD STUFFING BOX
PARTS #: 98-331-594
CASTING #: R-56723
MADE IN USA
WEIGHT: 40 LBS
DIMENSIONS: 18"X3"H
CONDITION: USED

BACK PLATE - ALLIS-CHALMERS - PWO-A3 - 24"
S/S 317 CG8M
PARTS #: 98-331-597
CASTING #: R-56732
BORE: SDT, 6.750"
MADE IN USA
WEIGHT: 100 LBS
OVERALL DIMENSIONS: 24"X10"H
CONDITION: USED

BACK PLATE - AHLSTROM - APT53-4
MODEL: APT53-4 - 21.750"
S/S
BORE: STD LARGE
PARTS #: 1420690141
CONDITION: USED

FRAME ADAPTOR - GOULDS - 3175 ST - 14"
ITEM 108 - FRAME ADAPTOR: 254-80-1000
MADE IN USA
WEIGHT: 25 LBS
DIMENSION: 20"X10"
CONDITION: USED

IMPELLER - SUNFLO - P3-ATK
SIZE: 4X3-8
STAINLESS - 24 VAN - 7.5"
PART #: J-JMO1NA25DB
CASTING #: 13608
THREAD: FINE
MADE IN: USA
WEIGHT: 5 PDS
DIMENSIONS: 8 X 8
CONDITION: USED

VOLUTE - SUNFLO - P3-ATK
4X3-8
MAT: STAINLESS
MADE IN:USA
WEIGHT:150 PDS
DIMENSIONS:10X19X15
CONDITION: USED

WATER PUMP - BELL & GOSSETT - SERIES e-1510
MODEL #: 6E 11BF
SERIAL #: PV1774-1 F90
2207 GPM, 85 FT, 60HP, 1800RPM
CASING:  6X8
P43971
MADE IN USA
WEIGHT: 3000 LBS WITH MOTOR AND BASE
DIMENSIONS: 28"X60"X32"
CONDITION: USED

AVAILABLE MOTOR: ITEM 64961
MOTOR - AC - BALDOR-RELIANCE
60HP
1780RPM
FRAME: 364T
230/460 VOLTS, 138/69 AMPS
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
CAT #: EM4314T
MADE IN USA
CONDITION: USED

PUMP - BELL & GOSSETT - Series e-1510
MODEL #: 6E 11BF
SERIAL #: PV1774-4 F90
2207 GPM, 85 FT, 60HP, 1800RPM
CASING: 6X8
MADE IN USA
WEIGHT: 3000 LBS WITH MOTOR AND BASE
DIMENSIONS: 28"X60"X32"

MOTOR AVAILABLE: ITEM 64959 
MOTOR - AC - BALDOR-RELIANCE
60HP
1780RPM
FRAME: 364T
230/460 VOLTS
ENCLOSURE: TEFC
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
CAT #: EM4314T
SERIAL #: C0904070034
SPEC: 14C051W863G1
MADE IN USA
WEIGHT: 800 LBS
CONDITION: USED

WATER PUMP - BELL & GOSSETT - SERIES e-1510
MODEL #: 6E 11BF
SERIAL #: PV1774-3 F90
2207 GPM, 85 FT, 60HP, 1800RPM
CASING 6X8
P43971
MADE IN USA
WEIGHT: 3000 LBS WITH MOTOR AND BASE
DIMENSIONS: 28"X60"X32"H

MOTOR AVAILABLE: ITEM 64957 
MOTOR - AC - BALDOR-RELIANCE
60HP
1780RPM
FRAME: 364T
230/460 VOLTS, 138/69 AMPS
ENCLOSURE: TEFC
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
CAT #: EM4314T
SERIAL #: C0904070034
SPEC: 14C051W863G1
MADE IN USA
WEIGHT: 800 LBS
CONDITION: USED

WATER PUMP - BELL & GOSSETT - VSC
MODEL #: 8X10-17.5 - 13.5
SERIAL #: PV1773
2676 GPM, 160 FT, 150HP, 1800RPM
CASING: 8X10
P5001538
MADE IN USA
WEIGHT: 6000 LBS WITH MOTOR AND BASE
DIMENSIONS: 41"X106"X51"H

MOTOR AVAILABLE: ITEM 64955
MOTOR - AC - BALDOR-RELIANCE
150HP
1780RPM
FRAME: 444T
460 VOLTS
ENCLOSURE: OPEN
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
CAT #: EM2558T-4
SERIAL #: C0901270050
SPEC: 18F033W866
MADE IN USA
WEIGHT: 800 LBS
CONDITION: USED

WATER PUMP - BELL & GOSSETT - VSC
MODEL #: 8X10-17.5 - 13.5 BF LMR
2676 GPM, 160 FT, 150HP, 1800RPM
CASING: 8X10
P5001538 
MADE IN USA
WEIGHT: 6000 LBS WITH MOTOR AND BASE
DIMENSIONS: 41"X106"X51"H
.
MOTOR AVAILABLE: ITEM 64953 
MOTOR - AC - BALDOR-RELIANCE
150HP
1780RPM
FRAME: 444T
460 VOLTS
ENCLOSURE: OPEN
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
CAT #: EM2558T-4
SERIAL #: C0809300040
SPEC: 18F033W866
MADE IN USA
WEIGHT: 800 LBS
CONDITION: USED

WATER PUMP - BELL & GOSSETT - VSC
MODEL #: 8X10-17.5 - 13.5 RF RHR
SERIAL #: PV1773-1 G90
2676 GPM, 160 FT, 150HP, 1800RPM
CASING: 8X10
P5001538
MADE IN USA
WEIGHT: 6000 LBS WITH MOTOR AND BASE
DIMENSIONS: 41"X106"X51"H
.
MOTOR AVAILABLE: ITEM 64951
MOTOR - AC - BALDOR-RELIANCE
150HP
1780RPM
FRAME: 444T
460 VOLTS
ENCLOSURE: OPEN
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
CAT #: EM2558T-4
SERIAL #: C0901270055
SPEC: 18F033W866
MADE IN USA
CONDITION: USED

PUMP - GOULDS 3180 XL
12X14-22
ITEM 100-VOLUTE: D03236 A01 1003, D.IRON, 12X14-22
ITEM 101-IMPELLER: C02732A 1203, S/S CF8M 316, 5-VANE, 20.250"
CASTING #: 68086
ITEM 176 - FRONT PLATE: C03039A01 1001, D.IRON
ITEM 184 - BACK PLATE: D.IRON, 22"
SEAL TYPE: MECHANICAL SEAL ONLY
SHAFT: S/S
MADE IN USA
WEIGHT: 1940 LBS
OVERALL DIMESIONS: 46"X48"X48"
CONDITION: USED

PUMP - GOULDS 3175 L
18X18-22
ITEM 100 - VOLUTE: 256-83-1003 - IRON - 18X18X22
CASTING #: 55776
ITEM 101 - IMPELLER: 261-26-1203 - S/S - 6-VANE - 21.750"
CASTING #: 55770
ITEM 176 - FRONT PLATE: 104-997-1000 - IRON
ITEM 184 - BACK PLATE: D04505A-1203 - BORE: TAPER - S/S - 22"
SEAL TYPE: MECHANICAL SEAL ONLY
SHAFT: S/S
MADE IN USA
WEIGHT: 3600 LBS
OVERALL DIMENSIONS: 48"X48"68"
CONDITION: USED

PUMP - GOULDS 3796 MTX
4X4-10
CASING: D.IRON, 4X4-10
CASTING #: 56757
IMPELLER: D.IRON, 5-VANE, 9"
STUFFING BOX COVER: D.IRON,10"
SHAFT: STEEL
MADE IN USA
CONDITION: USED

MOTOR SEIMENS AVAILABLE ITEM: 64892

PUMP/MOTOR MOUNTED ON GOULDS BASE PLATE
OVERALL WEIGHT: 800 LBS
OVERALL DIMENSIONS: 60"X16"X25"

PUMP VERTICAL - GOULDS VHS
8X8-22
SERIAL #: 420A627
750RPM, GPM: 3000
FT.HD: 75 S.G.: .99
IMPELLER DIA: 22"
MADE IN ASHLAND PA USA
DIMENSIONS: 66"X48"X115"

MOTOR - AC - SIEMENS - 150 HP
150HP
1785RPM
FRAME: B445T
460 VOLTS
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
MODEL: PE-21 PLUS
TYPE: RGZESD
APPLICATION: BELT - VERTICAL
MADE IN USA
WEIGHT: 1000 LBS
DIMENSIONS: 45"X29"X30"
CONDITION: USED

OVERALL WEIGHT INCLUDING MOTOR: 3000 LBS
OVERALL DIMENSIONS: 66"X77"X115"

PUMP VERTICAL - GOULDS VHS
8X8-22
SERIAL #: 450A527
CASTING #: 62293
750RPM, GPM: 3000
FT.HD: 75 - S.G.: .99
IMPELLER DIA: 22"
MADE IN: USA
DIMENSIONS: 66"X48"X115"

MOTOR - AC - SIEMENS - 150 HP
150HP
1785RPM
FRAME: B445T
460 VOLTS
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
MODEL: PE-21 PLUS
TYPE: RGZESD
APPLICATION: BELT - VERTICAL
MADE IN USA
WEIGHT: 1000 LBS
DIMENSIONS: 45"X29"X30"
CONDITION: USED

OVERALL WEIGHT INCLUDING MOTOR: 3000 LBS
OVERALL DIMENSIONS: 66"X77"X115"

IMPELLER - GOULDS 3180 MTX
6X8-14
S/S 316, 5-VANE, 13.5"
PART #: C02730A0-1203
CASTING #: 68074
MADE IN USA
WEIGHT: 36 LBS
OVERALL DIMENSIONS: 14"X4"H
STORE SURPLUS

IMPELLER - GOULDS 3180 MTX
6X8-14
S/S 316, 5-VANE, 13.5"
PART #: C02730A-1203
CASTING #: 68074
MADE IN USA
WEIGHT: 36 LBS
OVERALL DIMENSIONS: 14"X4"H
STORE SURPLUS

SHAFT - GOULDS 3180 XL
S/S
PARTS #: D04859A-2249
TYPE: SOLID
COND: USED
MADE IN USA
WEIGHT: 80 LBS
OVERALL DIMENSIONS: 36.750" L

SHAFT - GOULDS 3180 XL
S/S
PARTS #: D04859A-2249
TYPE: SOLID
COND: USED
MADE IN USA
WEIGHT: 80 LBS
OVERALL DIMENSIONS: 36.750" L

ROTOR - MOYNO PUMP - 2000 SERIES
2F050 - PARTS #: 424049700
ROT 2F050, ALYSTL - S/S
LENGTH: 43"
DIA: 2.825
STORE SURPLUS
WEIGHT: 90 LBS

POWER END - GOULDS - 3500 S
CASTING #: 57866
MADE IN USA
WEIGHT: 300 LBS
OVERALL DIMENSION: 44"X16"
STORE SURPLUS

IMPELLER - GOULDS 3500 STX
3X6-14
S/S, 5-VANE, 14"
PART #: C03262A-1209
MADE IN USA
WEIGHT: 36 LBS
OVERALL DIMENSIONS: 14"X 4"H
STORE SURPLUS

SUBMERSIBLE PUMP, FLYGT - 4"
REF: 3127.180.3066

MOTOR:
10HP
1750RPM
460VOLTS
13 AMPS
60 HZ

MADE IN USA
WEIGHT: 360 LBS
OVERALL DIMENSIONS: 32"X24"X24"
CONDITION: USED

PUMP - GOULDS 3175 M
10X12-18
CASING: 10X12-18, S/S CF8M 316
CASTING #: 56156
IMPELLER: S/S, 4-VANE, 17"
FRONT PLATE: CD4
STUFFING BOX COVER: S/S, 22", BORE: STD
SHAFT: S/S
MADE IN USA
WEIGHT: 1550 LBS
OVERALL DIMENSIONS: 48"X35"X46"
CONDITION: USED

POWER END - GOULDS 3175 M, 22"
D.IRON
S/S SLEEVE
SHAFT: 2.750", STEEL
OVERALL DIMENSIONS: 30"X30"X40"
REFURBISHED

CENTRIFUGAL MULTI-STAGE PUMP - GRAYMILLS - 1" NPT
MODEL: MSPR7-1.5F
MAXIMUM DISCHARGE PRESSURE: 90 PSI
7 STAGES
MSPR: CAST IRON
SHAFT: STAINLESS STEEL
BOWL: STAINLESS STEEL
COLUMN: STAINLESS STEEL
IMPELLER/DIFFUSER: POLYCARBONATE
MOUNT EITHER HORIZONTAL OR VERTICAL

MOTOR: FRANKLIN ELECTRIC
1 1/2HP
3450 RPM
230/460
MODEL: 131007110
FRAME: 56J
3 PH
ENC: TEFC
RATE: CONT
KVA CODE: M
INS: B
MADE IN USA
WEIGHT: 30 LBS
DIMENSIONS: 24"X9"X9"
STORE SURPLUS

WEARING RING - CASING - GOULDS 3405 L
12X14-14DV
PARTS #: 71855-1203
S/S
STORE SURPLUS

IMPELLER - GOULDS 3175 L
12X14-18
S/S, 4-VANE, 15.750"
ITEM 101 - PART #: 258-100-1203
CASTING #: 55590
STORE SURPLUS

IMPELLER - GOULDS 3175 M
8X10-22
S/S, 4-VANE, 19.250"
ITEM 101 - PARTS #: 259-72-1203
STORE SURPLUS

IMPELLER - GOULDS 3405 L
12X14-14 DV
S/S, 6-VANE, 11"
PART #: 1036644
MADE IN: USA
WEIGHT: 30 LBS
OVERALL DIMENSIONS: 11"D X 7"H
STORE SURPLUS

PUMP DIAPHRAGME - WILDEN PUMPS - 8
FRAME: ALUMINIUM
INLET: 2"
OUTLET: 2"
SERIE #: 0021549370
DESC: T8/AAAAB/TNU/TF/ATF
ITEM: 08-11024
M/O: M577090
DATE: 10/13/14
MADE IN USA
WEIGHT: 60 LBS X18"X16"
OVERALL DIMENSIONS: 27"X18"X16"
CONDITION: USED

PUMP - DURCO - MARK 2 - 3X2-13
VOLUTE: S/S, 3X2X13
IMPELLER: S/S, 5-VANE, 13"
STUFFING BOX COVER: S/S
WEIGHT: 300LB                          
DIMENSION: 30X15X15"                    
MADE IN USA                           
SERIAL #: 112580
ALLOY D4
1750RPM
300 GPM

VOLUTE - ALLIS-CHALMERS 
5X4-17
S/S CF8M
CASTING #: R-52844
WEIGHT: 400 LBS
OVERALL DIMENSIONS: 34"X30"X16"
CONDITION: USED

VOLUTE - BINGHAM
4X6-12
S/S
SERIAL #: 34230497

PUMP - GOULDS 3196 MT
1.5X3-10
ITEM 100 - VOLUTE: 249-60-1203, S/S, 1.5X3-10
CASTING #: 58595
ITEM 101 - IMPELLER: 100-593-1203, S/S, 5-VANE, 9"
CASTING #: 54017
ITEM 184 - BACK PLATE: 100-585-1203, BORE: STD, S/S, 10"
SEAL TYPE: MECHANICAL
SHAFT: S/S
MADE IN CANADA
WEIGHT: 250 LBS
OVERALL DIMENSIONS: 26"X17"X20"

PUMP - GOULDS 3175 M
4X6-14
ITEM 100 - VOLUTE: 258-23-1203
6X4-14, S/S
ITEM 101 - IMPELLER: 257-96-1203
CASTING #: 55922, S/S, 2/4-VANE, 12.5"
ITEM 176 - FRONT PLATE: 104-36-1203, S/S
ITEM 184 - BACK PLATE: 254-104-1203
S/S, 14", BORE: STANDARD
SEAL TYPE: PACKING
SHAFT: S/S
MADE IN: CANADA
WEIGHT: 840 LBS
DIM: 42X22X28
.

PUMP - GOULDS 3175 S
4X6-14
ITEM 100 - VOLUTE: 258-23-1203
CASTING #: 55972, 4X6-14, S/S 
ITEM 101 - IMPELLER: D00137A02-1225
CASTING #: 57585, S/S CG3M, 5-VANE, 11.875" 
ITEM 176 - FRONT PLATE: 104-36-1203
CASTING #: C87366, S/S 
ITEM 184 - BACK PLATE: 254-64-1203
S/S, DIA: 14.250", BORE: STD
SEAL TYPE: MECHANICAL
SHAFT: S/S
MADE IN: USA
WEIGHT: 850 LBS
OVERALL DIMENSIONS: 40"DX27"HX22"L

PUMP - AHLSTROM - APT51-10  
12X10-18
CASING: 141634014, S/S, 12X10-18
IMPELLER: S/S, 5-VANE, 17"
FRONT PLATE: 14172701, S/S 
STUFFING BOX COVER: 283684, S/S, 18" 
MADE IN USA
WEIGHT: 1300 LBS
OVERALL DIMENSIONS: 45X33X40
CONDITION: USED

PUMP - AHLSTROM - APT43-10
12X10-15
CASING: 12X10X15, S/S
CASTING #: 14131
IMPELLER: S/S, 5-VANE, 10"
FRONT PLATE: S/S
CASTING #: 141726
STUFFING BOX COVER: S/S, 15"
SHAFT: STEEL
MADE IN FINLAND
WEIGHT: 900 LBS
OVERALL DIMENSIONS: 42X30X39
CONDITION: USED

PUMP - AHLSTROM - APT53-6 
10X6-21
CASING: S/S, 10X6-21 
CASTING #: 141639
IMPELLER: S/S, 4-VANE, 18.375" 
FRONT PLATE: S/S 
CASTING #: 141721
STUFFING BOX COVER: S/S, 21" 
CASTING #: 283689
SHAFT: S/S
MADE IN FINLAND
WEIGHT: 1100 LBS
OVERALL DIMENSIONS: 40X36X30
CONDITION: USED

VOLUTE - GOULDS 3196 MT
3X4-7
CF8M
ITEM 100 - PARTS #: D00247A02-1203
CASTING #: 57729
MADE IN USA
WEIGHT: 77 LBS
DIM: 20"X14"X6"
STORE SURPLUS

POWER END - GOULDS 3175 M - 22"
MADE IN USA
WEIGHT: 640 LBS
OVERALL DIMENSIONS: 36"X32"X32"
CONDITION: 20%

DYNAMIC SEAL REAR HOUSING ASSEMBLY - GOULDS 3175 M
S/S, 22", DYNAMIC SEAL
PART #: D00698A-01-1203
CASTING #: 58753
MADE IN USA
WEIGHT: 85 LBS
OVERALL DIMENSIONS: 24"X8"
CONDITION: USED

DYNAMIC SEAL BACK COVER - GOULDS 3175 M
S/S - 22"
PART #: C01060A-01
CASTING #: 587531
MADE IN USA
WEIGHT: 60 LBS
OVERALL DIMENSIONS: 24"X4"
CONDITION: USED

IMPELLER - GOULDS 3175
6X8-22
S/S 316, 5-VANE, 22"
PART #: D00125A02-1203
CASTING #: 52747
WEIGHT: 105 LBS
OVERALL DIMENSIONS: 22"X8"
CONDITION: USED

IMPELLER - CANADA PUMP CRE
6X4-13
S/S - 3-VANE - 11.5"
PART #: 52-429-713
THREAD: COARSE .875"-9 UN
COND: STORE SURPLUS

BACK PLATE - CANADA PUMP CRE - 13"
S/S 316 CF8M
CASTING #: G2855
BORE TYPE: STD
CONDITION: USED

PUMP - AHLSTROM - APT32-4C
6X4C-13
CASING PART #: 1422270141 6X4-13, S/S 
IMPELLER PART #: 2838810141 S/S, 4-VANE, 13" 
FRONT PLATE PART #: 2835110141 S/S 
STUFFING BOX COVER PART #: 1420610141 S/S, 13.250" 
SHAFT: S/S
MADE IN USA
WEIGHT: 500 LBS
OVERALL DIMENSIONS: 28"P X 26"H X 26"L
OVERALL CONDITION: USED

PUMP - AHLSTROM - APT32-4
6X4-13
CASING PART #: 1422500141, S/S - CASTING #: A8903A - 6X4-13
IMPELLER PART #: 141928 - S/S, 4-VANE, 11.625"
CASTING PART #: A8903A FRONT PLATE PART #: 141716 - S/S
STUFFING BOX COVER PART #: 141870 S/S, 13"
SHAFT: S/S
MADE IN FINLAND
WEIGHT: 480 LBS
OVERALL DIMENSIONS: 25"X20"X28"
OVERALL CONDITION: USED

SLURRY PUMP - GORMAN RUPP - 12B22-8 - 2"
IMPELLER: 2-VANE, S/S, 6"
FRONT PLATE: S/S
BACK PLATE: S/S
SHAFT: S/S
MADE IN CANADA
DIMENSION: 26"WX30"LX22"H
.
MOTOR - AC - ABB
3HP
1735RPM
FRAME: 182T
575 VOLTS
ENCLOSURE: TEFC
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: K
WEIGHT: 84 LBS
CONDITION: USED

PUMP SLURRY - GORMAN RUPP 12B22-8 - 2"
IMPELLER: 6", 2-VANE, S/S
BACK PLATE:  S/S
SHAFT: S/S
MADE IN: CANADA
DIMENSIONS: 26"X30"X22"H
.
MOTOR - AC - GE 
3HP
1765RPM
FRAME: 182T
575 VOLTS
ENCLOSURE: TEFC
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: K
MODEL: 5KS182SSP204D8
MADE IN: CANADA
WEIGHT: 76 LBS
CONDITION: USED

FAN PUMP - CANADA PUMPS P-4400
5X4-12
DOUBLE END SUCTION
C.IRON
IMPELLER: S/S, 10.5", CLOSED
BODY: C.IRON
SEAL TYPE: PACKING
SHAFT: S/S
MADE IN CANADA
OVERALL DIMENSIONS: 28"X28"X24"

SLEEVE - WORTHINGTON FRBH-182
3" EXT. X 5.875", 2.625" INT.
PARTS #: 9901703
STORE SURPLUS

DRIVE ASSY - GORMAN-RUPP - T3A3-B
IMPELLER: IRON, 2-VANE, 8.750"
SHAFT: STEEL
MADE IN USA
WEIGHT: 90 LBS
OVERALL DIMENSIONS: 20"X12"X12"
CONDIITON: USED

PUMP - GOULDS 3196 MTX
4x6-10
ITEM 100 - VOLUTE: D03123A-1203, S/S, 4X6-10  
ITEM 101 - IMPELLER: 140-146-34-1203, S/S, 6-VANE, 9.250" 
ITEM 184 - BACK PLATE: 100-586-1012, D.IRON, BORE: STD, 10" 
SEAL TYPE: PACKING GLAND
SHAFT: STEEL
MADE IN USA
WEIGHT: 340 LBS
OVERALL DIMENSIONS: 32"X24"X24"
CONDITION: USED

PUMP - SULZER BINGHAM - CZ80-400
5x3-16

CASING: 5X3-16, D.IRON, COND: 30%

IMP: S/S, 5-VANE CLOSED, 13", COND: 15%

STUFFING BOX COVER: D.IRON, 16", COND:30%

SHAFT: STEEL
MADE IN USA
WEIGHT: 440 LBS
CONDITION: USED

PUMP - SULZER - CZ60-315
4x3-13

CASING: 4x3-13, FONTE, COND: 20%

IMPELLER PART #: 54667001 4008
S/S, 5-VANE CLOSED, 12.375", COND: 20%

STUFFING BOX COVER: D.IRON, 13", COND: 30%

SEAL: PACKING
SHAFT: STEEL
MADE IN USA
WEIGHT: 340 LBS
OVERALL DIMENSIONS: 26"X20"X20"
CONDITION: USED

PUMP - SULZER - CZ125-315
6x4-12

CASING: 6X4-12, IRON, COND: 40%

IMPELLER: S/S, 6-VANE CLOSED, 10", COND: 15%

STUFFING BOX COVER: IRON, 12", COND: 40%

SHAFT: STEEL
WEIGHT: 400 LBS
OVERALL DIMENSIONS: 30"X22"X22"
CONDITION: USED

PUMP - GOULDS 3175 S
4x6-18

ITEM 100 - VOLUTE: PEERLESS
4X6-18, D.IRON, COND: 40%

ITEM 101 - IMPELLER: 257-97-1203
S/S, 2/4-VANE, 15", COND: 30%
CASTING #: 55923

ITEM 176 - FRONT PLATE: 104-37-1203
S/S 316 CF8M, COND: 40%
CASTING #: 7580363

ITEM 184 - BACK PLATE: 254-66-1203
S/S, 18", BORE: S, COND: 40%

SEAL TYPE: PACKING
SHAFT: STEEL
MADE IN USA
WEIGHT: 1080 LBS
OVERALL DIMENSIONS: 30"X24"X24"
CONDITION: USED

HIGH PRESSURE PUMP - CARVER PUMP - 3x2-6
TYPE: RS6-B
SIZE TYPE: 3X2X6
D.IRON
STAGE: 6
INLET DIA: 4"
OUTLET DIA: 3"
SHAFT DIA: 1.250"
CAPACITY GPM: 158
CAPACITY PRESSURE: 1155' (TDH)
SERIAL #: 204378-1A
MADE IN USA
WEIGHT: 380 LBS
OVERALL DIMENSIONS: 37"X14"X14"
CONDITION: USED

FAN PUMP - SULZER - ZBGXV-450
20x16-22
TYPE: ZBGXV-450, YEAR: 1978
BODY: D.IRON, COND: 15%
SEAL TYPE: PACKING
SHAFT: STEEL
MADE IN USA
WEIGHT: 4000 LBS
OVERALL DIMENSIONS: 63"X58"X40"H
CONDITION: USED

PUMP - GOULDS 3196 M
1.5X3-6
ITEM 100 - VOLUTE: 104-421-1012, D.IRON,1.5X3-6
CASTING #: 53785
ITEM 101 - IMPELLER: 76777-1013, D.IRON, 5-VANE, 6"
ITEM 184 - BACK PLATE: 100-107-1012, BORE: STD, D.IRON, 6"
SEAL TYPE: PACKING GLAND
SHAFT: STEEL
.
MOTOR - AC - WEG
20HP, 1.5KW
1755RPM
FRAME: 145T
575 VOLTS
ENCLOSURE: TEFC
SERVICE FACTOR: 1.25
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: K
MODEL: FH21507
.
MOUNTED ON GOULDS BASE PLATE WITH PUMP
MADE IN USA
WEIGHT: 380 LBS
OVERALL DIMENSIONS: 45"X13"X20"
CONDITION: USED

PUMP POWER END - HAYWARD GORDON
6 X 4 - 10
MADE IN CANADA
OVERALL CONDITION: USED

STUFFING BOX COVER - WORTHINGTON 18"
MODEL: FRBH-182
S/S
PARTS #: 2113738
COND USED

PUMP - MOYNO 2L3 - 1.5"
TYPE: 2L3-SSQ-AAA-MC PM
MADE USA
WEIGHT: 25 LBS
OVERALL DIMENSIONS: 28"X6"X6"
CONDITION: USED

HIGH PRESSURE PUMP - TONKAFLO
MODEL #: SS8510KB
SERIAL #: 030617478
INLET: 3"
OUTLET: 3"
MAX INLET PRESSURE: 200 PSI - 14 BAR
MAX DISCHARGE PRESSURE: 750 PSI- 51 BAR
MAX LIQUID TEMPERATURE: 125°F - 52C
MECHANICAL SEAL: STD 1"-21-BF50-1C1

NOMINAL PUMP PERFORMANCE
3450 RPM
BOOST: 189 PSI - 12.0 BAR
FLOW: 85 GPM - 19.3 M³/H

MADE IN USA
STORE SURPLUS

FAN PUMP, CANADA PUMP, 10 SL
12X10-15.5
STAINLESS STEEL
SHAFT: IRON
COMPLETE PUMP

CASING COVER, AHLSTROM, APT-53-6
PARTS #: 1420690141, 21", Stainless Steel
FRAME ADAPTER
STORE SURPLUS

SPECK PUMP NP25 GEARBOX, VOITH PAPER
MODEL: NP25 AQ
SPEC: K
SERIAL: S0331
ID. H84.616351 H84.616110
STORE SURPLUS

FEEDER - THICK STOCK PUMP - TSP-400
REFURBISHED

FAN PUMP - CANADA PUMP 12 SL
14X12-14.5
IMPELLER: S/S, 14.5", 6-VANE 1/2-1/2
BODY: D. IRON
SEAL TYPE: PACKING GLAND

FAN PUMP, CANADA PUMP, MODEL: 20 SLH
20X23X24
IMPELLER: 22"
RPM: 1150, GPM: 13 000 US, T.D.HEAD: 150
LAST USED WITH 700 TO 800 HP

CASING, FAN PUMP, GOULDS, 3405L
12X14-14
CASTING #: 54577
GOULDS PARTS#: 254-11 1203
STAINLESS STEEL
NO SHAFT AND NO IMPELLER

FAN PUMP - GOULDS 3410 - 4 X 6 - 13H
4X6-13H
IMPELLER: S/S - 13.5"
BODY: D.IRON 
SHAFT: S/S
.
MOTOR - AC - BALDOR
20HP
1200RPM
FRAME: 268T
230/460 VOLTS

FAN PUMP - GOULDS 3410 S
4X6-11
BODY: IRON
USED

FAN PUMP - GOULDS 3410 
8X10-12
# SERIE: 224C024
IMPELLER: IRON - CLOSED - 10.5" 
BODY: D.IRON
SHAFT: S/S
USED

PUMP, HORIZONTAL SPLIT CASE, WORTHINGTON 4 LR-10
4X5-10
IMPELLLER DIA.: 8.750", BRONZE
BODY: STEEL
SERIAL#: Y720478
MADE IN USA
REBUILT CONDITION
WITH NEW PARTS

GSJH TWO-STAGES CENTRIFUGAL PUMP
BYRON JACKSON
4X6-13.250 L GSJH
TYPE: L GSJH
INLET: 6"
OUTLET: 4"
SHAFT DIA: 2.1875"
STEEL
GPM: 550 
ROT:CCW
SERIAL #: 82TM1571
WEIGHT: 1680 LBS
DIM: 56X34X32

GSJH TWO-STAGES CENTRIFUGAL PUMP

PUMP, GOULDS 3700 S
1.5X3-9
D.Iron
Complete With Base

Multi-Stage Vertical Booster Pump, GOULDS, SSV, 1 1/4"
CATALOG #:1SVBK5E6
360 PSI

MOTOR BALDOR
2HP
208-230/460 VOLTS
3450 RPM

Multi-Stage Vertical Booster Pump, GOULDS, SSV, 1 1/4"
CATALOG #: 1SVBK5E6
360 PSI

MOTOR BALDOR 2HP
208-230/460 VOLTS
3450 RPM

HIGH PRESSURE PUMP, - SIHI
MODEL: HE32BX9/1
1.5 X 2
9 STAGES

PUMP, SUNFLO, MODEL: P1-CPC, SERIE: P-1000
MODEL: P1-CPC S/N: 974313099, HIGH PRESSURE PUMP
22 GPM @ 200 PSI

MOTOR BALDOR
HP: 5
RPM: 1750
FRAME: 184 TD
VOLTS 575
# SERIE P1297 71210206

HIGH PRESSURE PUMP - SUNFLO P-1000
SIZE TYPE: PS-CPB
INLET: 1"
OUTLET: 1"
BODY: ALUMINIUM
REFERENCE #: P1-CPB
SERIAL #: 90436532
SHAFT: STEEL
MADE IN: USA
DIM: 14X14X20

HIGH PRESSURE PUMP - SUNFLO P-1000
SIZE TYPE: P1-CPB
1 STAGE
INLET: 1"
OUTLET: 1"
BODY: ALUMINIUM
REFERENCE #: P1-CP8
SERIAL #: 90436531
SHAFT: STEEL
MADE IN: USA
WEIGHT: 45 LBS
DIM: 14"X14"X20"

HIGH PRESSURE PUMP - SUNFLO P15-DSB
SERIE: P-1500
MODEL: P15-DSB
S/N; 99151A210
FLOW: 5 GPM
TDH: 632 FEET
INLET: 1"NPT, OUTLET: 1"NPT
.
MOTOR - GE
HP: 5
RPM: 3540
FRAME: 184T 
VOLTS: 575
MODEL: 5KS134SSP104D9
TYPE: KS
S/N: YNP7471NC04A

HIGH PRESSURE PUMP - SUNFLO P15-DSB
SERIE: P-1500
MODEL: P15-DSB
S/N; 991514211
FLOW: 5 GPM
TDH: 632 FEET
INLET: 1"NPT, OUTLET: 1"NPT

HIGH PRESSURE PUMP - SUNFLO P15-CSB
SERIE: P-1500
MODEL: P15-CSB
S/N; 991514367
FLOW: 6.8 GPM
TDH: 380 FEET
INLET: 1"NPT, OUTLET: 1"NPT
.
MOTOR - GE
HP: 2
RPM: 1725
FRAME: 145T, TYPE: KS
VOLTS: 575
MODEL: 5KS145SSP204D9
TYPE: KS
S/N: RPP9155RB01F

HIGH PRESSURE PUMP - SUNFLO P15-CSB
SERIE: P-1500
MODEL: P15-CSB
S/N; 991514366
FLOW: 6.8 GPM
TDH: 380 FEET
INLET: 1"NPT, OUTLET: 1"NPT

MOTOR - GE
HP: 2
RPM: 1725
FRAME: 145T
VOLTS: 575
MODEL: 5KS145SSP204D9
TYPE: KS
S/N: RPP9023BB01I

HIGH PRESSURE PUMP - SUNFLO P-2000
SIZE TYPE: P2-EHR
INLET: 2"
OUTLET: 1.5"
SHAFT DIA: 1.5"
SERIAL #: 664414166
210 L/MINUTE
RATIO: 3:1
HEAD: 321 M
MADE IN USA

HIGH PRESSURE PUMP - SUNFLO P-2000
SIZE TYPE: P2-EHR
INLET: 2"
OUTLET: 1.5"
SHAFT DIA: 1.5"
MODEL #: P2AGS Z
SERIAL #: 89445231
SHAFT: 1.5
MADE IN: DENVER, COLORADO
WEIGHT: 60 LBS
DIM: 30X18X18

PUMP, TRAVAINI, BT 653/2KC/A3
MULTISTAGE SELF-PRIMING
MAT: STAINLESS STEEL, 316, CF8M
IMPELLER: OPEN, STAR TYPE
CAPACITY: 165 USGPM
PRESSURE: 222 TDH
MECHANICAL SEAL, JOHN CRANE: 1.375", TYPE: L

MOTOR
WESTHINGHOUSE
30 HP
1760 RPM
FRAME: 286T
575 VOLTS
3 PH
60 HZ
AMP: 28
SF: 1.15
INSULATION CLASSE: B
MAX TEMP: 40°C
SERIAL#: 1100056,1100065
MOTOR WEIGHT: 394 LBS

PUMP MADE IN ITALY, MOTOR MADE IN CANADA

ECCENTRIC SCREW PUMP, ALLWEILER, 4"
TYPE: AED1E 560-ID/131 PO4
SERIAL #: 7214282
Single-stage up to delivery pressure up to 115 psi
Size: 560 (The numbers indicate the theoretic delivery in l/min with n = 400 1/min and Δp = 0 bar)
Capacity: ± 560 LPM
Design: ID = Industrial design with internal bearing
Suction and outlet branch: ANSI flanges 4" (see attached doc)
Branch position: 1 (see attached doc)
Store Surplus

SUBMERSIBLE PUMP, ABS, MODEL: SE SI 20D
236/460 VOLTS
7.5/3.8 AMPS
60 HZ
RPM: 3450
GPM: 150
CLASS B
2 HP /