Pump

PUMP, DIAPHRAGM, SANDPIPER, MODEL SA2A
WITH STEEL HAND TRUCK

PUMP, DIAPHRAGM, WILDEN, MODEL: M15
DIAPHRAGM 3" 3" X 3" ALUMINIUM BODY
GPM: 287
MAX. PRESS: 125 PSI
MAX. LIFT CAPACITY: 17'
MAX. DIA. SOLID: 3/8"

PUMP, DIAPHRAGM PUMP, WARREN RUPP, SANDPIPER
MODEL: SA1-A
- CAPACITY:
• 0 to 42 gallons per minute
(0 to 159 liters per minute)

- AIR DISTRIBUTION VALVE:
• No-lube, no-stall design

- SOLIDS-HANDLING
• Up to 1 in. (25.4mm)

- HEADS UP TO:
• 125 psi or 289 ft. of water
(8.8 Kg/cm2 or 88 meters)

- MAXIMUM OPERATING PRESSURE:
• 125 psi (8.6 bar)

- DISPLACEMENT PER STROKE:
• 0.10 Gallon / 0.38 liter

2 AVAILABLE:
-1 of 2 SERIAL #: 491311
-2 of 2 SERIAL #: 917286

PUMP - AHLSTROM - APT-42-8
10X8-14
ITEM 102 - CASING: 1422390152, D.IRON, 10X8-14
ITEM 230 - IMPELLER: 2838870141, S/S, 13.5", 5-VANE
ITEM 135 - SIDE PLATE: 2835180141, S/S
ITEM 161 - CASING COVER: 1420640152, D.IRON, 14"
USED

PUMP - ALLIS CHALMERS - PWO-A2
8X4X17
CASING PART #: 98-232-893, S/S, 8X4X17
IMPELLER PART #: 98-431-319, S/S, 3-VANE, DIA: 13,750"
SIDE PLATE PART #: 98-331-606, S/S
STUFFING BOX COVER PART #: 98-331-594, S/S
USED

PUMP - ALLIS CHALMERS - PWO-A2
8X4-17
CASING PART #: 98-232-893, S/S, 8X4-17
IMPELLER PART#: 98-431-319, S/S, 3-VANE, DIA:13"
SIDE PLATE PART#: 98-331-606, S/S
STUFFING BOX COVER PART #: 98-331-594, S/S
USED

PUMP - ALLIS CHALMERS - PWO-A2
8X4-18
CASING: S/S, 8X4-18
IMPELLER: S/S, 3-VANE, DIA: 16.5"
SIDE PLATE: S/S
STUFFING BOX COVER: S/S
WATER GLAND
USED

PUMP - ALLIS-CHALMERS - PWO-A2
8X6-17
IMPELLER PART #: 98-431-32 S/S, 3-VANE, DIA: 12"
CASING PART #: 98-232-892, D.IRON
CASING SIDE PLATE: 98-331-606, S/S
STUFFING BOX: 98-331-594, S/S

USED

PUMP - ALLIS-CHALMERS - PWO-A2
8X6-17
VOLUTE PART #: 98-232-892, S/S CF8M, 8X6-17
IMPELLER PART #: 98-431-321, S/S CF8M, 3-VANE, DIA:16"
FRONT PLATE PART #: 98-331-606, S/S CF12M
BACK PLATE PART #: 98-331-594, S/S CF8M
USED

PUMP, ALLIS-CHALMERS, PWO A2
8x6-17
IMPELLER: 98-431-321, S/S, 3-Vane, 14"
CASING: 98-431-341, S/S, 8x6-17
CASING SIDE PLATE: 98-331-606, S/S
STUFFING BOX: 98-331-594, S/S
USED CONDITION

PUMP - ALLIS-CHALMERS - PWO-A2
CASING: 10X8X18
IMPELLER: S/S, 3-VANE, DIA: 14"
WATER GLAND
USED

PUMP, WORTHINGTON, 3FRBH-101
6x3-10
VOLUTE: 2104550, D.Iron, 6x3x10
IMPELLER: 2114541, Stainless Steel, 9.625", 4-Vane
FRONT PLATE: 2103690, Stainless Steel
BACK PLATE: D.Iron, 2104493
GLAND S/S, SHAFT STEEL

SLURRY PUMP - ALLIS-CHALMERS - SRL R3/3-10
3X3-10
MODEL: SRL R3/3-10
IMPELLER (CLOSED): 330-286 - 10" RUBBER
MECHANICAL SEAL
STORE SURPLUS

VACUUM PUMP - NASH - APSC-3
TEST: AHP1168-07
INLET: 3.125"
OUTLET: 4"
SHAFT: 1.5"
MADE IN ALABAMA

VACUUM PUMP - NASH SC6
TEST NUMBER: 95Y0270
INPUT: 5.750"
OUTPUT: 4"

VACUUM PUMP - NASH SC6
S/S
1170 RMP
SHAFT DIA: 3.375"
INLET: 6"
OUTLET: 4"
TEST #: 98Y0019
OVERALL DIMENSIONS: 45"X24"X27"

VACUUM PUMP, NASH, CL-402
TEST: 93E8818
INLET: 3"
OUTLET: 2.5"
CENTER TO CENTER INLET AND OUTLET: 18"

VACUUM PUMP - NASH CL1001
TEST #: 81U4562
MATERIAL: IRON
820 RPM
POSITION: 4
SHAFT DIA: 2.750"
INLET: 5"  
OUTLET: 4"
MADE IN: USA
POIDS: 1400 LBS
OVERALL DIMENSIONS: 52"X26"X28"

VACUUM PUMP - NASH H9
YEAR: 2007
PART #: 81U3645
REBUILT BY NASH S/N: 640896
MADE IN: USA

VACUUM PUMP PARTS, ARMSTRONG, CL 1002
CONE MODEL: CL1002
MAT: S/S

PUMP - AHLSTROM SULZER - CPT-22-1B
3X1.5-10
CASING PART #: 813272CA4 A890 3A, S/S
IMPELLER PART #: 613300MP41 A890 3A, 8.250", S/S, 5-VANE
DYNAMIC SEAL PART #: 10", S/S

PUMP, AHLSTROM SULZER, CPT-24-3
4X3-13
CASING PART #: 813087CA41 A890 3A, S/S
IMPELLER PART #: 613098MP41 A890 3A, 12.250", S/S, 6-VANE
DYNAMIC SEAL: 13", S/S

PUMP - ALLIS-CHALMERS - CSO-F4-D1
2X1-10
IMPELLER: 9.125", SEMI-OPEN
S/S
SHAFT: STEEL

PUMP, CRANE, MODEL: ES6MV-HT
1.250" NPT X 1" NPT - 4"
IMPELLER: 4.250", BRONZE MONEL BLADES
RACEWAY: BRONZE, SHAFT: S/S 303
SHAFT SEAL: CARBONE CERAMIC
NEW STORE SURPLUS

WATER PUMP, BURKS, MODEL: ES6MV-HT
1.250" NPT X 1" NPT - 4"
IMPELLER: 4.250", BRONZE MONEL BLADES
RACEWAY: BRONZE, SHAFT: S/S 303
SHAFT SEAL: CARBONE CERAMIC
USED PUMP

PUMP, DISCFLO, 806-14-3HHD
8x6-14
CASING: S/S
Discpac IMPELLER DIA: 13.5", S/S
DISCPAC: 13.5-3HHD-SS
HEAD: 40'
SEAL #: SC / SC / CC / DBL
S/N: 2305
(Poseipump)

PUMP, DURCO, MARK II GROUP 2
3x1.5-10/85
ALLOY: D4
CLOSE IMPELLER 5-VANE, STAINLESS STEEL
MECHANICAL SEAL: XP 191
120 GPM
50 TDH
1800 RPM

PUMP, DURCO, MARK II GROUP 2
4x3-10
VOLUTE: 22235: S/S, CD4
IMPELLER: 35641, S/S, 8", 5-VANE
BACK PLATE: S/S
ALLOY 17
WATER GLAND
USED

WATER PUMP, DURCO MARK II, 6 X 4 - 13A, GROUP 2
6x4-13
IMPELLER: 36846, 11", SEMI-OPEN, 5 V, S/S
VOLUTE: 26037, D.IRON
BACK PLATE: 21885, 13", S/S
GPM: 882
HEAD: 40'
RPM: 1800
S/N : 123133

PUMP, GOULDS, SST
2x2.5-6
IMPELLER: S/S 304
400 GPM
80 FEET HEAD
1720 RPM
2 HP

PUMP, GOULDS, MODEL: 3200
2.5x3-8
P/N: KC11PCVN3014
STOCK #: 30344

MOTOR, AC, WEG
2 HP
3480 RPM
FRAME: 145T
575 VOLTS

Light Duty Sealless
Designed specifically to handle moderate corrosive services. It’s ideally suited for low pressure batch process or transfer services. Meets strictest EPA requirements.
Capacities to 175 GPM (40 m3/h)
Heads to 130 feet (39 m)
Temperatures to 180° F (82° C)
Pressures to 35 PSIG (241 kPa)
Viscosities to 50 centipoise

PUMP, GOULDS 3715
1x1.5-7
IMPELLER: 6"

WATER PUMP, INGERSOLL-DRESSER, HOC3+
3x2-13
IMPELLER: 12.81", 5V, S/S
PUMP IN D.IRON
SERIAL#: 0103-2824

PUMP - WORTHINGTON CNG52
1.5X1-5
CASING PARTS #: 23550, 316 S/S
1.5X1-5> CASTING #: M3170
IMPELLER PARTS #: 23552
CN7M, 4-VANE, 5"
CASTING #: 23552-99

WATER PUMP, WORTHINGTON, D1011
2x1-10
IMPELLER 8.750", CLOSE
SERIAL #: Y704328D

PUMP, CLOSE COUPLED, FLOWSERVE Ingersol Dresser, MODEL: D824
1x1.5-6
CASING: Cast Iron, NEW
IMPELLER: 5.250", BRONZE, 5V, CLOSED, NEW
STUFFING BOX COVER: BRONZE, NEW
Store Surplus

PUMP, GORMAN RUPP, 80 SERIES
1.250" NPT, D.Iron
MODEL: 81 1/4 A3-X.53P
MOTOR:
MARATHON
1/2 HP
3450 RPM
208-230/460 VOLTS
3 PH, 60 HZ
FRAME: 56J-6 S.F. 1.0
SERIAL#: 79568

PUMP, GORMAN-RUPP, 80 SERIES
1.250" NPT, D.Iron
MODEL: 81 1/4 A3-X.50 3P

MOTOR:
MARATHON
1/2 HP
3450 RPM
208-230/460 VOLTS
3 PH, 60 HZ
FRAME: 56C7-63, SF. 1.0
SERIAL#: 101338

PUMP - GORMAN-RUPP 12B2-B - 2"
MODEL: 12B2-B
SERIES #: 102752
D. IRON
MADE IN: ST THOMAS, ONTARIO, CANADA

PUMP, GORMAN-RUPP, 12B2-B, 2"
Stainless Steel
VOLUTE - STORE SURPLUS

CASING, GORMAN RUPP, T3A3-B, 3"
Store Surplus

CASING, GORMAN-RUPP, T3A3-B, 3"
3", D.Iron
USED CONDITION

CASING, GORMAN-RUPP, T4A60-B, 4"

DRIVE ASSY, GORMAN-RUPP, T4A60-B, 4"
STORE SURPLUS

PUMP, GORMAN-RUPP, T8A60-B
8"
IMPELLER: 15", D.Iron, 2V

PUMP, GORMAN-RUPP, 112D60-B
10x12-18
IMPELLER DIA: 18", OPEN, 2V, D.Iron
GORMAN-RUPP SELF PRIMING CENTRIFUGAL PUMP

PUMP, GORMAN-RUPP, 112D60-B
10x12-18
IMPELLER DIA: 18", OPEN, 2V, D.Iron
GORMAN-RUPP SELF PRIMING CENTRIFUGAL PUMP