Pump

PUMP - AHLSTROM - APT-52-14
16X14-20
CASING: PART #: 141637, S/S, 16X14-20
IMPELLER PART #: 25668, S/S, 6-VANE, 17.250"
CAST. #: 97-7676
FRONT PLATE: S/S
STUFFING BOX COVER: PART #: 283686, S/S, 20"
SHAFT: S/S
MADE IN: FINLAND
WEIGHT: 1880 LBS
OVERALL DIMENSIONS: 54"X42"X45"

PUMP - AHLSTROM - APT-53-4
8X4-21
CASING: S/S, 8X4-21
CAST. #: 143266
IMPELLER: S/S, 4-VANE, 18.5"
CAST. #: 471144
FRONT PLATE: S/S
CAST. #: 28600701141
STUFFING BOX COVER: S/S, 21"
CAST. # 283689
SHAFT: S/S
MADE IN: USA
WEIGHT: 1360

PUMP - AHLSTROM - APT-53-8
10X8-21
CASING: PARTS #: 141640, S/S, 10X8-21
CAST. #: 25600
IMPELLER: CLOSED, PART #: 114190, S/S, 6-VANE, 20.750"
STUFFING BOX COVER: PART #: 283689, S/S, 21"
SHAFT: S/S
MADE IN: FINLAND
WEIGHT: 1150 LBS
OVERALL DIMENSIONS: 42"X38"X32"

PUMP - AHLSTROM - APT-51-12
14X12-18
CASING: PART #: 141636, S/S, 14X12-18
IMPELLER: PART #: 141982, S/S, 6-VANE, 16.5"
FRONT PLATE: S/S
STUFFING BOX COVER: PART #: 283681, S/S, 18"
SHAFT: S/S
MADE IN: FINLAND
WEIGHT: 1450 LBS
OVERALL DIMENSIONS: 32X44X44

PUMP - AHLSTROM - APT-32-3
6X3-13
CASING: PART #: 141740, 6X3-13, S/S
CAST. #: 25832
IMPELLER: S/S, 3-VANE, 13"
CAST. #: 255882
FRONT PLATE: PART #: 141712, S/S
STUFFING BOX COVER: S/S, 13"
SHAFT: S/S
MADE IN: FINLAND
DIM: 30X24X24

PUMP SLURRY - GORMAN-RUPP - 12B22-B
SIZE: 2", S/S
IMPELLER: S/S, 2-VANE, 6"
SHAFT: S/S
MADE IN: CANADA
WEIGHT: 120 LBS
DIM: 30X12X20

POWER END - GOULDS 3180 XL - 25"
ITEM 184 - BACK PLATE: 68424
D.IRON - 25" 
SEAL TYPE: MECHANICAL
USED

PULLOUT - GOULDS 3180 M - 16"
ITEM 184 - BACK PLATE: 218C859
IRON - DIA: 16.750" 
SEAL TYPE: MECHANICAL
USED"

POWER END - GOULDS 3180 M - 19"
ITEM 184 - BACK PLATE: 219C644BKPO
IRON - DIA: 19.250" - STORE SURPLUS
SEAL TYPE: MECHANICAL
MADE IN USA
STORE SURPLUS

PULL OUT - GOULDS - 3700 S - 9"
BACK PLATE: IRON - 9.5"-10.875"
STORE SURPLUS
SEAL: MECHANICAL
WEIGHT: 250 LBS
MADE IN USA
OVERALL DIMENSIONS: 27"X16"X16"
STORE SURPLUS

PUMP - GOULDS 3175 L
10X12-22
ITEM 100 - VOLUTE: 259-107-01-1203
CASTING #: 56225
316 S/S, 10X12-22
ITEM 101 - IMPELLER: 259-110-1203
CASTING #: 56227
316 S/S, 4-VANE, 17.5"
ITEM 176 - FRONT PLATE: 104-292-1203
316 S/S
ITEM 184 - BACK PLATE: 254-76-1203
CASTING #: 56178
316 S/S, 22.750", BORE: 5.750"
SEAL TYPE: PACKING

PUMP - GOULDS 3175 L
16X18-22
ITEM 100 - VOLUTE: D00305A01-1203
316 S/S, 16X18-22
ITEM 101 - IMPELLER: 113-41-1203
316 S/S, 6-VANE, 22"
ITEM 176 - FRONT PLATE: 254-76-1203
316 S/S
ITEM 184 - BACK PLATE: 254-76-1203
CASTING #: 56178
316 S/S, 22", BORE: 5.945"
SEAL TYPE: PACKING

POWER END - GOULDS 3196 MTI - 13"
SHAFT DIA: 1.750"
CASTING: 54056

IMPELLER - GOULDS 3196 MT
2X3-10
S/S, 5-VANE, 8.5"
ITEM 101 - PARTS #: 100-595-1203
CASTING #: 54109
STORE SURPLUS
MADE IN: USA
WEIGHT: 5 LBS DIM: 8.5"X3"

IMPELLER - GOULDS 3196 MT
1.5X3-13
S/S, 5-VANE, 11.5"
ITEM 101 - PARTS #: 100-537-1203
CASTING #: 68720
MADE IN: USA
WEIGHT: 7 LBS DIM: 11.5"X3"

IMPELLER - GOULDS 3175 M - 8X10-14
316 S/S, 2-VANE, 12.250"
ITEM 101 - PARTS #: 259-67-1203
CASTING #: 56165

IMPELLER - AHLSTROM - APT-53-8
10X8-21
A890 3A, 5-VANE, 18.875"
PART #: 6140110141
STORE SURPLUS

FRONT PLATE - GOULDS 3175 L
12X14-22
14X14-22
PARTS #: 104-411-1203
S/S
CASTING #: 56186

PUMP - VIKING Q-32
4x4-8
CASING SERIAL #: 027579, IRON
4X4-8, COND: 20%
IMPELLER: IRON, 8-VANE, 8", COND: 30"
STUFFING BOX COVER: IRON, 14", COND: 30%
CASTING #: 18QR
SHAFT DIA: 2"
SHEAVE DIA: 25"
MADE IN CANADA
WEIGHT: 354 LBS
OVERALL DIMENSIONS: 38"X29"X25"
CONDITION: USED

PUMP - VIKING Q-32 
GEAR PUMP
CASING SERIAL #: 022791, IRON
CASTING #: 523006
IMPELLER: IRON, 8-VANE, 8" 
STUFFING BOX COVER: IRON, 14" 
CASTING #: 18QR
SHAFT DIA: 2"
SHEAVE DIA: 25"
WEIGHT: 365 LBS
OVERALL DIMENSIONS: 34"X29"X15"
CONDITION: USED 
MADE IN CANADA

PUMP - VIKING Q-32
4 X 3 - 8
CASING SERIAL #: 028786, IRON
4X3-8, COND: 20%
IMPELLER: IRON, 8-VANE, 8", COND: 30%
SHAFT DIA: 2"
SHEAVE DIA: 25"
MADE IN CANADA
WEIGHT: 356 LBS
OVERALL DIMENSIONS: 38"X34"X25"
CONDITION: USED

PUMP - VIKING Q-32
4 X 3 - 8
CASING SERIAL #: 028898, IRON
4X3-8, COND: 30%
CASTING #: 1624006
IMPELLER: IRON, 8-VANE, 8", COND: 25%
STUFFING BOX COVER: IRON, 14", COND: 35%
CASTING #: 18QR
SHAFT DIA: 2"
SHEAVE DIA: 25"
MADE IN CANADA
WEIGHT: 365 LBS
OVERALL DIMENSIONS: 40"X28"X18"
CONDITION: USED

PUMP PROGRESSIVE CAVITY - MOYNO 2000
SERIES #: 2000
MODEL: 2F022 G1CDQ 3SAX
SERIAL #: AS7831406 KN
.
MOTOR - AC - HANSEN
10 HP
1760 RPM
FRAME: DF254T-Z
575 VOLTS
ENCLOSURE: TEFC
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
APPLICATION: HORIZONTAL
MOUNTED ON BASE
MADE IN USA
WEIGHT: 1080 LBS
OVERALL DIMENSIONS: 99"X22"X20"

2 = Number of stages in the pumping elements
F = Drive End
022 = 22 gal./100 revs. - Element (Capacity)
G = Gear joint connection
1 = Flanged Suction Port Type
-
C = Cast iron - Body material
D = Alloy steel - Wettable parts material
Q = Nitrile (70 durometer) - Stator material
-
3 = Corresponds to revision 3.
S = Single mechanical seal - Sealing variations
A = Standard - Internal variations
X = Special to application - Rotor variations

PUMP - VIKING LL-32
3" X 3"
140 GPM @ 520 RPM
HP REQUIRED AT
25 PSI: 5 HP
50 PSI: 7.5 HP
100 PSI: 15 HP
SERIES: 022393
MADE IN CANADA
WEIGHT: 135 LBS
DIM: 20X36X16
idem: 64638

PUMP - VIKING LL-32
3" X 3"
140 GPM @ 520 RPM
HP REQUIRED AT
25 PSI: 5 HP
50 PSI: 7.5 HP
100 PSI: 15 HP
SERIES: 022672
MADE IN CANADA
WEIGHT: 135 LBS
DIM: 20"X36"X16"
idem: 64639

BEARING HOUSING - GORMAN RUPP 4"
IRON
CASTING #: 33322-211
WEIGHT: 35 LBS
DIM: 12X12X12X

VOLUTE - ALLIS-CHALMERS PWG
8X6
MODEL: PWG
S/S
SERIES #: 45425-2-1
IMPELLER DIA.: 16.9375"
MADE IN NORWOOD, OHIO, USA

BASEPLATE - GOULDS 3196 MT - BED PLATE #1
FOR MOTOR 1 TO 5 HP - FRAME: 143 TO 215
CASTING #: 54065
45X12X7 - HEIGHT TO MOTOR
45X12X4 - HEIGHT TO PUMP
USED

IMPELLER - ALLIS-CHALMERS
8X6-17
CLOSED IMPELLER
S/S, 17"
PART #: 58-933-998-50051

PUMP - VIKING KK-124
SERIES #: 2785X
MOUNTED ON BASE
MADE IN CANADA

IMPELLER - GOULDS 3405 L - 10 X 12 - F18217
10X12-17
IRON, 5-VANE STAGERED/CLOSED, 17"
WEIGHT: 105 LBS
OVERALL DIMENSIONS: 17"X10"
STORE SURPLUS

PUMP - VIKING - LL4125
SERIAL #: 11285756
SEAL KIT #: 3-464-SEAL-K104
REBUILD KIT #: 3-464-REBUILD-K81
MADE IN IOWA, USA
WEIGHT: 180 LBS 13"X16"
OVERALL DIMENSIONS: 28"X13"X16"
STORE SURPLUS

SLURRY PUMP - GORMAN-RUPP T4A3-B
4", IRON
IMPELLER: 9.750"
FRONT PLATE
BACK PLATE

PUMP - GORMAN-RUPP
MODEL: 12B22B
DIM: 2.250", IRON AND S/S
IMPELLER: 6"
FRONT PLATE
BACK PLATE
SEAL: MECHANICAL
SHAFT: STEEL
MADE IN: ST THOMAS, ONTARIO, CANADA
WEIGHT: 80 LBS
DIM: 26X12X18

PULLOUT - GOULDS 3180 L - 16"
14x14-16
BACK PLATE: S/S, 16.750"
BORE: 4.5"
SEAL TYPE: MECHANICAL

PULLOUT, GOULDS, 3175 M, 14"
Item 228 - Bearing Frame: D00412A-1000
Item 134A - Bearing Housing: 102-863-1001
REFURBISHED

IMPELLER - GORMAN-RUPP 14A2-B
4X4-8.250
D.IRON, 2-VANE, 8.250"
CASTING #: 1692A5

IMPELLER - BABCOCK-WILCOX - PRJ-0
10X6-15
3-VANE, 15"
PART #: 500564
CASTING #: 500560-1

BACK PLATE - GOULDS 3175 M - 18"
CF8M
ITEM 184 - PARTS #: 254-70-1203

PUMP - AHLSTROM - APT 33-4
6X4-16
CASING: 1421176, S/S, 6X4-16 
CAST. #: 25336
IMPELLER: 141926, S/S, 4-VANE, 15.875" 
FRONT PLATE: 1417140141, S/S 
STUFFING BOX COVER: 141422, S/S, 16" 
SHAFT: S/S
MADE IN FINLAND
WEIGHT: 450 LBS
OVERALL DIMENSIONS: 30"X27"X24"
CONDITION: USED

PUMP - AHLSTROM - APT-53-6
10X6-21
CASING: 141639, S/S, 10x6-21
IMPELLER: 141948, S/S, 4-VANE, 20.5"
FRONT PLATE: S/S
STUFFING BOX COVER: S/S
SHAFT: STEEL
MADE IN: USA
WEIGHT: 1200 LBS 
OVERALL DIMENSIONS: 41 X 31 X 36

PUMP - ALLIS-CHALMERS PWO-A1
6X3-14
CASING: S/S, 6X3-14
IMPELLER: S/S, 2-VANE, DIA 11.5" 
CAST. #: R-56021
FRONT PLATE: 156713, S/S 
CAST. #: 21101
STUFFING BOX COVER: S/S, DIA 14" 
SHAFT: S/S
MADE IN USA
WEIGHT: 400 LBS
OVERALL DIMENSIONS: 30"X20"X26"
CONDITION: USED