Pump

POWER END - GOULDS 3175 M - 14"
PART #: 27-060-183
CASTING #: 57867
USED

FRAME ADAPTOR - GOULDS 3175 M - 18"
C.IRON
USED

FRAME - GOULDS 3175 MT - 18"
D.IRON
USED

BEARING END PLATE COVER - ALLIS-CHALMERS - PWO-A2
PWO-A2
CAST #: 55728
USED

SHAFT - ALLIS-CHALMERS - PWO-A2
MAT: STEEL
PART #: 98-431-339
TYPE: SOLID
USED

FRAME FOOT - ALLIS-CHALMERS PWO-A2 - 17"
C.IRON
PART #: N/A
CAST #: R-56702
USED

BACK PLATE - ALLIS-CHALMERS PWO A2 - 17"
S/S - STANDARD BORE
PART #: 98-531-594
CAST #: P 56723
USED

FRAME ADAPTOR - GOULDS 3175 M - 18"
D.IRON
PARTS #: D02702A-1000
USED

FRAME - ALLIS-CHALMERS PWO A1 - 14"
D.IRON
USED

SHAFT - ALLIS-CHALMERS - PWO A2
S/S
PARTS #: 98-431-339
TYPE: SLEEVED
USED

SHAFT - ALLIS-CHALMERS - PWO A2
S/S
PARTS #: 98-431-339
TYPE: SLEEVED
USED

FRAME - AHLSTROM APT53-4 - 21"
IRON
CASTING #: 283709
USED

IMPELLER - GOULDS 3196 MTX
4X6-10H
S/S - 6-VANE - 10"
ITEM 101 - PARTS #: 104-146-18-1203
CASTING #: 58434
USED

IMPELLER - GOULDS 3196 MT
2X3-10
S/S 316 CF8M - 5-VANE - 9.5"
ITEM 101 - PARTS #: 100-595-1203
CASTING #: 54019
STORE SURPLUS

IMPELLER - GOULDS 3196 MTX
2X3-8
S/S - 5-VANE - 7.750"
ITEM 101 - PARTS #: 100-161-1203
CASTING #: 53811
STORE SURPLUS

IMPELLER - GOULDS 3175 M
8X10-18H
S/S - 4-VANE - 17.5"
ITEM 101 - PARTS #: 259-89-1203
USED

IMPELLER - GOULDS 3175 M
8X10-18H
CG3M 317L - 4-VANE - 13.5625"
CASTING #: 56196
USED

IMPELLER - GOULDS 3175 M (PEERLESS 8175 M) - 8 X 10 - 14
8X10-14
S/S - 6-VANE - 13"
ITEM 101 - PARTS #: 2696661R
USED
PEERLESS 8175 M

IMPELLER - GOULDS 3175MT
8X10X18
S/S - 4-VANE - 16.250"
ITEM 101 - PARTS #: C00157A2-1203
USED

IMPELLER - GOULDS 3175M
8X10X14
S/S - 6-VANE - 14.3125"
ITEM 101 - PARTS #: D00150A02
CASTING #: 57780
USED

IMPELLER - GOULDS 3175M
6X8-22
S/S - 2-4 VANE - 20.5"
ITEM 101 - PARTS #: 25964-1203
CASTING #: 91620
USED

IMPELLER - GOULDS 3175S
8X8-12
S/S 316 CF8M - 5-VANE - 8"
ITEM 101 - PARTS #: D01093A02-1203
CASTING #: 58946
USED

IMPELLER - GOULDS 3175S
6X8-14
S/S 316 CF8M - 4-VANE - 12.250"
ITEM 101 - PARTS #: D00130A02-1203
CASTING #: 57573
USED

IMPELLER - AHLSTROM APT32-4
6X4-13
S/S - 6-VANE CLOSED - 12"
PART #: 141895
CASTING #: 25509
USED

IMPELLER - ALLIS-CHALMERS PWO-A3
10X8-21
S/S 316 CF8M - 4-VANE - 21"
PART #: 98-432-711
CASTING #: R-57030
THREAD: 12UN-2A - 3.750"
USED

IMPELLER - ALLIS-CHALMERS PWO-A2
8X4-17
S/S - 3-VANE - 16"
USED

IMPELLER - ALLIS-CHALMERS PWO A1
6X4-14
S/S CG8M - 2-VANE - 12.750"
CASTING #: R56021
USED

IMPELLER - AHLSTROM APT 52-14
16X14-20
S/S - 6-VANE - 15.375"
PART #: 191944
USED

IMPELLER - AHLSTROM APT53-4
8X4-21
S/S - 5-VANE - 19.250"
PART #: 2859440141
CASTING #: 25660
USED

FRONT PLATE - GOULDS 3175L
10X12-22
S/S
ITEM 176 - PARTS #: 104-292-1203
CASTING #: 58224
USED

FRONT PLATE - PEERLESS 8175M
8X10-14
S/S
USED

PUMP - GOULDS 3196 MT
CASING: 3X4-8G - S/S 
IMELLER: S/S - 5-VANE - 8" 
STUFFING BOX COVER: S/S 
MADE IN USA
USED
PEERLESS PUMP

PUMP - GOULDS 3196 MT
CASING: D.IRON - 1X2-10
IMELLER: S/S - 5-VANE - 10" 
STUFFING BOX COVER: D.IRON 
MECHANICAL SEAL
MADE IN CANADA
USED

PUMP - GOULDS 3196 MT
CASING: D.IRON - 1X2-10
IMELLER: S/S - 5-VANE - 10"
STUFFING BOX COVER: S/S
MADE IN CANADA
USED

PUMP - 8X6-14
CASING: 8X6-14 - S/S
IMELLER: S/S - 2-VANE - 13.750" 
STUFFING BOX COVER: S/S 
USED

PUMP - AHLSTROM - APT44-8
10X8-16
CASING: 10X8-16 - FONTE
CASTING #: 141681
IMPELLER: S/S - 5-VANE - 13.875"
# CASTING: 141935
FRONT PLATE: S/S
STUFFING BOX COVER: FONTE
SHAFT: S/S
USED

PUMP - AHLSTROM - APT52-14
16X14-20
CASING: D.IRON - 16X14-20
IMPELLER: S/S - 6-VANE - 18.250"
FRONT PLATE: S/S
STUFFING BOX COVER: D.IRON - 20"
SHAFT: S/S
MADE IN: FINLAND
USED

PUMP - SULZER - APT44-8
10X8-16
CASING: 10X8-16 - S/S
CASTING #: 141681
IMPELLER: S/S - 5-VANE - 13.375"
FRONT PLATE: S/S 
STUFFING BOX COVER: S/S
SHAFT: S/S
MADE IN USA

FRONT COVER - GORMAN-RUPP - T3A3-B
3" - D.IRON
FRONT COVER WITH FRONT PLATE
MADE IN CANADA
WEIGHT: 40 LB
STORE SURPLUS

PUMP - GORMAN-RUPP - T4A60-B - 2"
CASING: 2" - C.IRON 
IMPELLER: 2-VANE
MADE IN CANADA

MOTOR - AC - ABB - 5 HP
5HP
RPM: 1735
FRAME: 184T
575 VOLT
MADE IN CHINA

USED

CASING - GORMAN-RUPP - T4A60-B
C.IRON
MADE IN CANADA
USED

CASING - ALLIS-CHALMERS PWK-OR
S/S - 8X4-17
98-530-415
MADE IN CANADA
USED

POWER END - GOULDS 3796 MTX - 13"
IMPELLER: NO
STUFFING BOX: NO
MADE IN USA
USED

IMPELLER - ALLIS-CHALMERS - PWK-OR
8X6-17
S/S - 3-VANE - 17"
PARTS: 98-431-149
USED

FRONT PLATE - ALLIS-CHALMERS - PWG-OR
5X4-17
S/S
CASTING #: 83203
MADE IN CANADA
STORE SURPLUS

FRONT PLATE - ALLIS-CHALMERS - PWG-OR
5X4-17
S/S
MADE IN CANADA
STORE SURPLUS

PUMP GORMAN-RUPP 1.5" NPT
81 1/2 D3-E.50 3P - IRON
IMPELLER: 5-VANE - 3.5" - COND: 5%
FRONT PLATE: COND: 15%
BACK PLATE: COND: 25%
MADE IN USA
CONDISION: USED

MOTOR - AC - TECHTOP
3/4HP
3470RPM
FRAME: 56J
230/460 VOLTS
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH - 60 HZ
DUTY: CONT
DESIGN: B
KVA CODE: K
MODEL: 56J-AL-TF-56J-2-B-D-.75
DATE OF MFG: 2013 11 03
MADE IN USA

FRAME ADAPTER - GOULDS 3196 MTO - 8"
D.IRON
PARTS #: 262-92-1013
WEIGHT: 20 LBS
OVERALL DIMENSIONS: 13"X7"
CONDITION: USED

FRAME ADAPTER - GOULDS 3196 MTX - 13"
D.IRON
PART #: 264-94-1013
WEIGHT: 50 LBS
OVERALL DIMENSIONS: 17"X7"
CONDITION: USED

POWER END - GOULDS 3196 MTX - 13"
WEIGHT: 140 LBS
DIMENSIONS: 17"X24"X17"
CONDITION: USED

POWER END - GOULDS 3175 L - 22"
ITEM 184 - BACK PLATE: 254-76-1203 - BORE: STD - S/S - 22.5"
SEAL TYPE: PACKING GLAND
CONDISION: USED

FRAME - GOULDS 3175 M
CASTING #: 57867
CONDITION: USED

POWER END - GOULDS HS - 3HM
6X6-12
TYPE: 3HM
D.IRON
BACK PLATE: S/S 316
SHAFT: STEEL
CONDITION: USED

SHAFT - GOULDS - 3405 M
STEEL
NON OEM PART
STORE SURPLUS

ROTATING ASSEMBLY - GOULDS 3410 S
4X6X13
IMPELLER DIA: S/S - 13"
SHAFT: S/S
STORE SURPLUS

POWER END - GOULDS HS - 3HM
6X6-12
TYPE: 3HM
D.IRON
BACK PLATE: S/S 316
SHAFT: STEEL
CONDITION: USED

IMPELLER - GOULDS 3196 M
3X4X10
ITEM 101 - PARTS #: 100-597-1203 - S/S 316 - 5-VANE - 8.5"
STORE SURPLUS

IMPELLER - GOULDS 3196 M
4X6X10
ITEM 101 - PARTS #: 101-527-1013 - D.IRON - 6-VANE - 9.5"
CASTING #: 54631
STORE SURPLUS

IMPELLER - GOULDS 3196 M
2X3-8
ITEM 101 - PARTS #: 100-161-1216 - S/S CD4 - 5-VANE - 7.5"
STORE SURPLUS

IMPELLER - GOULDS 3175 M
8X10-22
ITEM 101 - PARTS #: 259-72-1203 - S/S 316 - 4-VANE - 18.750"
STORE SURPLUS

IMPELLER - GOULDS 3175 M
8X10X22
ITEM 101 - PARTS #: 259-72-1203 - S/S 316 CF8M - 4-VANE - 18.750"
CASTING #: 56192
STORE SURPLUS

IMPELLER - GOULDS 3175 M - 8 X 10 - 22
8X10-22
ITEM 101 - PARTS #: 259-72-1203 - S/S 316 CF8M - 4-VANE - 18.5"
CASTING #: 56192
STORE SURPLUS

IMPELLER - GOULDS 3175 MTX
6X8-22
ITEM 101 - PARTS #: D00125A02-1203 - S/S - 5-VANE - 22.5 INCH
STORE SURPLUS

IMPELLER - GOULDS 3175 S
4X6-14
ITEM 101 - PARTS #: D00137A01-1203 - S/S 316 - 5-VANE - 12"
STORE SURPLUS

IMPELLER - GOULDS 3175 S
4X6X18
ITEM 101 - PARTS #: 257-97-1203 - S/S 316 - 2/4-VANE - 18"
STORE SURPLUS

IMPELLER - GOULDS 3175 S
4X6-14
ITEM 101 - PARTS #: 254-101-1203 - S/S 316 - 2-VANE - 14"
CASTING #: 55922
STORE SURPLUS

IMPELLER - GOULDS 3175 S
4X6-14
ITEM 101 - PARTS #: D00137A02-1203 - S/S 316 CF8M - 5-VANE - 12"
CASTING #: 57585
STORE SURPLUS

IMPELLER - GOULDS 3175 S
4X6-18
ITEM 101 - PARTS #: 257-97-1203 - S/S 316 - 2/4-VANE - 15.5"
CASTING #: 55923
STORE SURPLUS

IMPELLER - GOULDS 3175 S
4X6-18
ITEM 101 - PARTS #: 257-97-1203 - S/S 316 - 2/4-VANE - 17.5"
STORE SURPLUS

IMPELLER - GOULDS 3410 M - 6 X 8 - 14H
6X8-14H
CLOSED - S/S - 5-VANE - 13"
PART #: D02671A01-1203
CONDITION: USED

IMPELLER - GOULDS 3410 M
6X8-14H
PART #: D02671A01-1203 - S/S - 5-VANE CLOSED - 13"
CONDITION: USED

IMPELLER - GOULDS 3410 M
6X8-14H
PART #: D02671A01-1203 - S/S - 5-VANE CLOSED - 13"
CONDITION: USED

IMPELLER - GOULDS 3410 M
6X8-14H
PART #: D02671A01-1203 - S/S - 5-VANE CLOSED - 13"
CONDITION: USED

IMPELLER - GOULDS 3405 L
6X8-22
PART #: 247-10-1203 - CLOSED - S/S - 5-VANE - 17.5"
CONDITION: USED

IMPELLER - GOULDS 3405 L
6X8-22
PART #: 257-10-1203 - S/S - 5-VANE CLOSED - 17.5"
CONDITION: USED

IMPELLER - GOULDS 3405 L
6X8-22
PART #: 257-10-1203 - S/S - 5-VANE CLOSED - 17.375"
CONDITION: USED

IMPELLER - GOULDS 3405 M
4X6-14
PART #: 243-9-1203 - S/S - 6-VANE CLOSED - 13.5"
CASTING #: 52099
STORE SURPLUS

BACK PLATE - GOULDS 3196 MT - 13"
S/S 316 CF8M
ITEM 184 - PARTS #: 100-529-1203
CASTING #: 53962
BORE TYPE: STD
STORE SURPLUS

PUMP - BLACK CLAWSON - DVS - 6"
STAINLESS STEEL
STORE SURPLUS

POMPE - GRUNDFOS - CR10-06
TYPE: CR10-06 A-GJ-A-E-HQQE
MODEL:A96126735P114260822
INLET AND OUTLET: 2.5"
SERIAL #: 0822

CASING - GOULDS 3196 MT - 1.5X3-10
1.5X3X10
S/S
249-60-1203

BEARING FRAME - GOULDS 3196 MTX
NO FRAME ADAPTER

POWER END - GOULDS 3196 MT - 13"
STUFFING BOX COVER: S/S - STD - 13"
100-529-1203

FRAME ADAPTER - GOULDS - 3175 MT - 18"

FRAME ADAPTER - GOULDS - 3175 M - 18"

POWER END - GOULDS - 3175 M
SHAFT: S/S
NO FRAME ADAPTER
NO FRAME FOOT

POWER END - GOULDS - 3175 S - 12"
BACK PLATE: S/S - STD - 12"
SHAFT: S/S 

POWER END - GOULDS - 3175 S - 14"
BACK PLATE: S/S - STD - 14"
SHAFT: S/S

DRIVE ASSY - GOULDS 3405 - 6X8-14
IMPELLER: S/S - 11"
COMPLET ASSEMBLY WITH WATER RING
STORE SURPLUS

DRIVE ASSY - GOULDS 3405 - 6X8-14
IMPELLER: S/S - 11.250"
COMPLET ASSEMBLY WITH WATER RING
STAGERED
STORE SURPLUS

DRIVE ASSY - GOULDS 3410 - 6X8-14
IMPELLER: S/S - 13.250"
COMPLET ASSEMBLY WITH WATER RING AND
MECHANICAL SEAL

FRAME ADAPTER - GOULDS - 3196 MT - 13"
262-94-1013
USED

IMPELLER - GOULDS 3196LT - 3 X 4 - 13"
S/S - 6-VANE - 9.750"
USED

IMPELLER - GOULDS 3196LT - 2 X 3 - 10"
S/S - 5-VANE - 9.5"
USED

IMPELLER - GOULDS 3196LT - 2 X 3 - 13"
S/S - 5-VANE - 10.250"
USED

IMPELLER - GOULDS 3405 - 10 X 12 - 17
S/S - 16.250"
243-101-1203
STAGERED
USED

BACK PLATE - GOULDS - 3196 MT - 13"
100-529-1203 - S/S
PEERLESS: 96M1146 2114
USED

BACK PLATE - GOULDS - 3196 MT - 13"
100-529-1203 - S/S

BACK PLATE - GOULDS - 3196 MT - 13"
100-529-1203 - S/S
USED

BACK PLATE - GOULDS - 3175 L - 22"
S/S
USED

BACK PLATE - GOULDS - 3175 S - 18"
S/S
USED

BACK PLATE - GOULDS - 3175 S - 18"
S/S
USED

BACK PLATE - GOULDS - 3175 M - 18"
S/S
USED

PUMP - ALLIS-CHALMERS - PWO A1 - 6X4-14
VOLUTE: S/S, 6X4-14
IMPELLER: S/S, 2-VANE, 13"
FRONT PLATE: S/S
BACKPLATE: S/S, 14"
USED

PUMP - ALLIS-CHALMERS - PWK-OR - 8X4-17
VOLUTE: S/S, 8X4-17 
IMPELLER: S/S, 3-VANE, 14" 
FRONT PLATE: S/S 
STUFFING BOX COVER: S/S, 17" 
USED

PUMP - BABCOCK-WILCOX - 6X8-13 - SRI-O
VOLUTE: S/S, 6X8-13 
IMPELLER: C83209, S/S, 3V, 12.750" 
FRONT PLATE: S/S 
STUFFING BOX COVER: S/S 
USAGE

PUMP - ALLIS-CHALMERS - PWG-OR - 8X4-17
VOLUTE: S/S, 8X4-17
IMPELLER: S/S, 3-VANE, 14"
FRONT PLATE: S/S
STUFFING BOX COVER: S/S, 17"
USED

PUMP - BABCOCK-WILCOX - 6X8-13 - SRI-O
VOLUTE: S/S, 6X8-13 
IMPELLER: C83209, S/S, 3V, 12.750" 
FRONT PLATE: S/S 
STUFFING BOX COVER: S/S 
USED

PUMP - ALLIS-CHALMERS - PWK-OR - 8X6-17
VOLUTE: S/S, 8X6-17 
IMPELLER: S/S, 3-VANE, 16" 
FRONT PLATE: S/S 
STUFFING BOX COVER: S/S, 17" 
USED

PUMP - BABCOCK-WILCOX - SRI-O
6X8-13
VOLUTE: S/S, 6X8-13 
IMPELLER: C83209, S/S, 3-VANE, 12" 
FRONT PLATE: S/S 
STUFFING BOX COVER: S/S 

PUMP - ALLIS-CHALMERS - PWO A2
8X6-17
VOLUTE: S/S 317, CF12M
IMPELLER: S/S, 3V, 13"
FRONT PLATE: S/S 316, CF8M
BACKPLATE: S/S, 17"

POWER END - GORMAN-RUPP - T4
IMPELLER: S/S, 2-VANE, 9.750"

POWER END - GORMAN-RUPP - T3A3-B
IMPELLER: D.IRON, 2-VANE, 8.750"

SLEEVE - GOULDS - 3180 XL
S/S

POWER END - BINGHAM CHO - 12.5"
STUFFING BOX COVER: S/S, 12.5"

POWER END - BABCOCK-WILCOX - SRI-0 - 13"
STUFFING BOX COVER: S/S

POWER END - ALLIS-CHALMERS - PWK-OR - 17"
MODELE: PWK-OR
USED

IMPELLER - GOULDS - 3196 MT - 1X2-10
S/S, 5-VANE, 10"
56381
USED

IMPELLER - GOULDS - 3175S - 4X6-18
S/S, 2-4 VANE, 17.5"
PARTS: 257-97-1203
USED

IMPELLER -ALLIS-CHALMERS - PWO A2 - 8X6-17
S/S, 3-VANE, 16"
C90529
STORE SURPLUS

IMPELLER - ALLIS-CHALMERS - PWO A2 - 8X6-17
98-431-321 - S/S, 3-VANE, 17"
USED

IMPELLER - ALLIS-CHALMERS - PWO A2 - 8X6-17
98-431-321 - S/S, 3-VANE, 17"
C90529
STORE SURPLUS

IMPELLER - BABCOCK-WILCOX - 6X8 SRI-O
S/S CD4, 3-VANE, 12.875"
C83209

IMPELLER - BABCOCK-WILCOX - 6X8 SRI-O
S/S, 3-VANE, 11.750"
C83209

STUFFING BOX COVER - BABCOCK-WILCOX - SRI-0
S/S - 12.5"
USED

STUFFING BOX COVER - BINGHAM CHO - 12.5
S/S - 12.5"
STORE SURPLUS

BACK PLATE - ALLIS-CHALMERS - PWK-OR - 17"
MODEL: PWK-OR
S/S
98-330-497
USED

CASING - GORMANN-RUPP PUMP - T3A3-B
NO DRIVE ASSY

PUMP - GORMAN-RUPP - T3A3-B

SHELL - VACUUM PUMP - NASH - CL 6002
TEST #: MC 01806
D.IRON CLADDED STEEL
277RPM
MADE IN USA
WEIGHT: 3500 LBS
OVERALL DIMENSIONS: 60"X55"LENGTH

HEAD - VACUUM PUMP - NASH - CL 6002
MADE IN USA
WEIGHT: 2000 LBS
OVERALL DIMENSIONS: 70"X60"X24"

*CLADDED IN SS*

BEARING HOUSING - NASH - CL 6002
MOBILE SIDE
CAST IRON

PACKING GLAND - NASH - CL 4002
D.IRON
MADE IN USA
WEIGHT: 10 LBS
OVERALL DIMENSIONS: 12"X5"H

BEARING HOUSING - NASH - CL 6002
D.IRON
FLOATING BEARING END
MADE IN USA
WEIGHT: 50 LBS
OVERALL DIMENSIONS: 16"X16"X6"H

BEARING HOUSING - NASH - CL 6002
D.IRON
MADE IN USA
WEIGHT: 50 LBS
OVERALL DIMENSIONS: 16"X16"X6"H

SHAFT - VACUUM PUMP - NASH - CL 6002
STEEL
MADE IN USA
WEIGHT: 2000 LBS
OVERALL DIMENSIONS: 99.5"LX9"D

SHAFT - VACUUM PUMP - NASH - CL 4002
STEEL
MADE IN USA
WEIGHT: 700 LBS
OVERALL DIMENSIONS: 8"X79"L

HEAD AND CONE - VACUUM PUMP - NASH - CL 6002
D.IRON
INLET: 12"
OUTLET: 10"
MADE IN USA
WEIGHT: 3000 LBS
OVERALL DIMENSIONS: 62"X70X40"H

HEAD AND CONE - VACUUM PUMP - NASH - CL 6002
D.IRON
INLET: 12"
OUTLET: 10"
MADE IN USA
WEIGHT: 900 LBS
OVERALL DIMENSIONS: 62"X70"X40"H

SHELL - VACUUM PUMP - NASH - CL 6002
D.IRON
MADE IN USA
WEIGHT: 3000 LBS
OVERALL DIMENSIONS: 60"X47"L

PACKING GLAND KIT - NASH - CL 4002
FOR BOTH SIDES
D.IRON
MADE IN USA
WEIGHT: 10 LBS
OVERALL DIMENSIONS: 12"X5"H

BEARING HOUSING - NASH - CL 4002
D.IRON
MADE IN USA
WEIGHT: 25 LBS
OVERALL DIMENSIONS: 18"X18"X10"H

HEAD - VACUUM PUMP - NASH - CL 4002
D.IRON
INLET: 10"
OUTLET: 8"
MADE IN USA
WEIGHT: 900 LBS
OVERALL DIMENSIONS: 50"X48"X32"H

HEAD - VACUUM PUMP - NASH - CL 4002
D.IRON
INLET: 10"
OUTLET: 8"
MADE IN USA
WEIGHT: 900 LBS
OVERALL DIMENSIONS: 50"X48"X32"H

SHAFT - VACUUM PUMP - NASH CL 6002
MATERIAL: STEEL
TOTAL LENGHT: 99 1/2 X9 DIAMETRE
WEIGHT; 2000 PDS

HEAD - VACUUM PUMP - NASH - CL 6002
CAST IRON
USED

HEAD - VACUUM PUMP - NASH - CL 6002
CAST IRON
USED

PACKING GLEN - NASH - CL 6002
CAST IRON
USED

SHAFT - NASH - CL 6002
MATERIAL: STEEL
TOTAL LENGHT: 99 1/2 X9 DIAMETRE
WEIGHT: 2000 PDS

SHAFT - ALLIS-CHALMERS - PWO A2
S/S
TYPE: PWO A2
LENGTH: 28.625"
OVERALL DIMENSIONS: 30"X6"

IMPELLER - GOULDS 3175 - 6 X 8-18
6X8-18
S/S, 5-VANE,16.750"
ITEM 101 - PARTS #:D00128A02-1203
CASTING #:57566
MADE IN USA
WEIGHT: 30 LBS

IMPELLER - ALLIS-CHALMERS - PWO A1 - 6 X 3 - 14
6X3-14
S/S, 2-VANE, 10.625"
PART #: 98-431-614
THREAD: FINE
MADE IN USA
WEIGHT: 15 LBS
DIMENSIONS: 11"X6"H

IMPELLER - ALLIS-CHALMERS - PWO A2
8X6-17
S/S, 3-VANE, 12.750"
PART #: 98-431-341
CASTING #: R-55715
THREAD: FINE
MADE IN CANADA
WEIGHT: 40 LBS
OVERALL DIMENSIONS: 12.750"X7"H

FRONT PLATE - ALLIS-CHALMERS - PWO A3 - 10 X 8 - 21
10X8-21
S/S 316 CF8M
PARTS #: 98-331-597
MADE IN USA
WEIGHT: 40 LBS
OVERALL DIMENSIONS: 21"X4"H
CONDITION: USED

BACK PLATE - GOULDS 3175 M - 22"
D.IRON
ITEM 184 - PARTS #: 103-12-1000
CASTING #: 55332
MADE IN USA
WEIGHT: 180 LBS
OVERALL DIMENSIONS: 22"X8"
CONDITION: USED

BACK PLATE - GOULDS 3175 M - 14"
D.IRON
ITEM 184 - PARTS #: 254-67-1000
CASTING #: 55378
MADE IN USA
WEIGHT: 100 LBS
OVERALL DIMENSIONS: 15"X4"
CONDITION: USED

BACK PLATE - GOULDS 3175 L - 22"
S/S 316 CF8M
ITEM 184 - PARTS #: 254-76-1203
CASTING #: 56178
MADE IN USA
WEIGHT: 100 LBS
OVERALL DIMENSIONS: 22"X8"
CONDITION: USED

BACK PLATE - GOULDS 3175 MT - 18"
S/S CG8M
ITEM 184 - PARTS #: 254-70-1203
CONDITION: USED

BACK PLATE - ALLIS-CHALMERS - PWO A2 - 17"
S/S
BORE TYPE: NON STANDARD, MECHANICAL SEAL ONLY
PARTS #: 98-331-594
CASTING #: R-56723
MADE IN USA
DIMENSIONS: 18"X8"
CONDITION: USED

BACK PLATE - ALLIS-CHALMERS - PWO A2 - 17"
S/S 317 CF8M
NON STANDARD STUFFING BOX
PARTS #: 98-331-594
CASTING #: R-56723
MADE IN USA
WEIGHT: 40 LBS
DIMENSIONS: 18"X3"H
CONDITION: USED

BACK PLATE - ALLIS-CHALMERS - PWO-A3 - 24"
S/S 317 CG8M
PARTS #: 98-331-597
CASTING #: R-56732
BORE: SDT, 6.750"
MADE IN USA
WEIGHT: 100 LBS
OVERALL DIMENSIONS: 24"X10"H
CONDITION: USED

BACK PLATE - AHLSTROM - APT53-4
MODEL: APT53-4 - 21.750"
S/S
BORE: STD LARGE
PARTS #: 1420690141
CONDITION: USED

FRAME ADAPTOR - GOULDS - 3175 ST - 14"
ITEM 108 - FRAME ADAPTOR: 254-80-1000
MADE IN USA
WEIGHT: 25 LBS
DIMENSION: 20"X10"
CONDITION: USED

IMPELLER - SUNFLO - P3-ATK
SIZE: 4X3-8
STAINLESS - 24 VAN - 7.5"
PART #: J-JMO1NA25DB
CASTING #: 13608
THREAD: FINE
MADE IN: USA
WEIGHT: 5 PDS
DIMENSIONS: 8 X 8
CONDITION: USED

VOLUTE - SUNFLO - P3-ATK
4X3-8
MAT: STAINLESS
MADE IN:USA
WEIGHT:150 PDS
DIMENSIONS:10X19X15
CONDITION: USED

WATER PUMP - BELL & GOSSETT - SERIES e-1510
MODEL #: 6E 11BF
SERIAL #: PV1774-1 F90
2207 GPM, 85 FT, 60HP, 1800RPM
CASING:  6X8
P43971
MADE IN USA
WEIGHT: 3000 LBS WITH MOTOR AND BASE
DIMENSIONS: 28"X60"X32"
CONDITION: USED

AVAILABLE MOTOR: ITEM 64961
MOTOR - AC - BALDOR-RELIANCE
60HP
1780RPM
FRAME: 364T
230/460 VOLTS, 138/69 AMPS
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
CAT #: EM4314T
MADE IN USA
CONDITION: USED

PUMP - BELL & GOSSETT - Series e-1510
MODEL #: 6E 11BF
SERIAL #: PV1774-4 F90
2207 GPM, 85 FT, 60HP, 1800RPM
CASING: 6X8
MADE IN USA
WEIGHT: 3000 LBS WITH MOTOR AND BASE
DIMENSIONS: 28"X60"X32"

MOTOR AVAILABLE: ITEM 64959 
MOTOR - AC - BALDOR-RELIANCE
60HP
1780RPM
FRAME: 364T
230/460 VOLTS
ENCLOSURE: TEFC
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
CAT #: EM4314T
SERIAL #: C0904070034
SPEC: 14C051W863G1
MADE IN USA
WEIGHT: 800 LBS
CONDITION: USED

WATER PUMP - BELL & GOSSETT - SERIES e-1510
MODEL #: 6E 11BF
SERIAL #: PV1774-3 F90
2207 GPM, 85 FT, 60HP, 1800RPM
CASING 6X8
P43971
MADE IN USA
WEIGHT: 3000 LBS WITH MOTOR AND BASE
DIMENSIONS: 28"X60"X32"H

MOTOR AVAILABLE: ITEM 64957 
MOTOR - AC - BALDOR-RELIANCE
60HP
1780RPM
FRAME: 364T
230/460 VOLTS, 138/69 AMPS
ENCLOSURE: TEFC
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
CAT #: EM4314T
SERIAL #: C0904070034
SPEC: 14C051W863G1
MADE IN USA
WEIGHT: 800 LBS
CONDITION: USED

WATER PUMP - BELL & GOSSETT - VSC
MODEL #: 8X10-17.5 - 13.5
SERIAL #: PV1773
2676 GPM, 160 FT, 150HP, 1800RPM
CASING: 8X10
P5001538
MADE IN USA
WEIGHT: 6000 LBS WITH MOTOR AND BASE
DIMENSIONS: 41"X106"X51"H

MOTOR AVAILABLE: ITEM 64955
MOTOR - AC - BALDOR-RELIANCE
150HP
1780RPM
FRAME: 444T
460 VOLTS
ENCLOSURE: OPEN
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
CAT #: EM2558T-4
SERIAL #: C0901270050
SPEC: 18F033W866
MADE IN USA
WEIGHT: 800 LBS
CONDITION: USED

WATER PUMP - BELL & GOSSETT - VSC
MODEL #: 8X10-17.5 - 13.5 BF LMR
2676 GPM, 160 FT, 150HP, 1800RPM
CASING: 8X10
P5001538 
MADE IN USA
WEIGHT: 6000 LBS WITH MOTOR AND BASE
DIMENSIONS: 41"X106"X51"H
.
MOTOR AVAILABLE: ITEM 64953 
MOTOR - AC - BALDOR-RELIANCE
150HP
1780RPM
FRAME: 444T
460 VOLTS
ENCLOSURE: OPEN
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
CAT #: EM2558T-4
SERIAL #: C0809300040
SPEC: 18F033W866
MADE IN USA
WEIGHT: 800 LBS
CONDITION: USED

WATER PUMP - BELL & GOSSETT - VSC
MODEL #: 8X10-17.5 - 13.5 RF RHR
SERIAL #: PV1773-1 G90
2676 GPM, 160 FT, 150HP, 1800RPM
CASING: 8X10
P5001538
MADE IN USA
WEIGHT: 6000 LBS WITH MOTOR AND BASE
DIMENSIONS: 41"X106"X51"H
.
MOTOR AVAILABLE: ITEM 64951
MOTOR - AC - BALDOR-RELIANCE
150HP
1780RPM
FRAME: 444T
460 VOLTS
ENCLOSURE: OPEN
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
CAT #: EM2558T-4
SERIAL #: C0901270055
SPEC: 18F033W866
MADE IN USA
CONDITION: USED

PUMP - GOULDS 3180 XL
12X14-22
ITEM 100-VOLUTE: D03236 A01 1003, D.IRON, 12X14-22
ITEM 101-IMPELLER: C02732A 1203, S/S CF8M 316, 5-VANE, 20.250"
CASTING #: 68086
ITEM 176 - FRONT PLATE: C03039A01 1001, D.IRON
ITEM 184 - BACK PLATE: D.IRON, 22"
SEAL TYPE: MECHANICAL SEAL ONLY
SHAFT: S/S
MADE IN USA
WEIGHT: 1940 LBS
OVERALL DIMESIONS: 46"X48"X48"
CONDITION: USED

PUMP - GOULDS 3175 L
18X18-22
ITEM 100 - VOLUTE: 256-83-1003 - IRON - 18X18X22
CASTING #: 55776
ITEM 101 - IMPELLER: 261-26-1203 - S/S - 6-VANE - 21.750"
CASTING #: 55770
ITEM 176 - FRONT PLATE: 104-997-1000 - IRON
ITEM 184 - BACK PLATE: D04505A-1203 - BORE: TAPER - S/S - 22"
SEAL TYPE: MECHANICAL SEAL ONLY
SHAFT: S/S
MADE IN USA
WEIGHT: 3600 LBS
OVERALL DIMENSIONS: 48"X48"68"
CONDITION: USED

PUMP - GOULDS 3796 MTX
4X4-10
CASING: D.IRON, 4X4-10
CASTING #: 56757
IMPELLER: D.IRON, 5-VANE, 9"
STUFFING BOX COVER: D.IRON,10"
SHAFT: STEEL
MADE IN USA
CONDITION: USED

MOTOR SEIMENS AVAILABLE ITEM: 64892

PUMP/MOTOR MOUNTED ON GOULDS BASE PLATE
OVERALL WEIGHT: 800 LBS
OVERALL DIMENSIONS: 60"X16"X25"

PUMP VERTICAL - GOULDS VHS
8X8-22
SERIAL #: 420A627
750RPM, GPM: 3000
FT.HD: 75 S.G.: .99
IMPELLER DIA: 22"
MADE IN ASHLAND PA USA
DIMENSIONS: 66"X48"X115"

MOTOR - AC - SIEMENS - 150 HP
150HP
1785RPM
FRAME: B445T
460 VOLTS
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
MODEL: PE-21 PLUS
TYPE: RGZESD
APPLICATION: BELT - VERTICAL
MADE IN USA
WEIGHT: 1000 LBS
DIMENSIONS: 45"X29"X30"
CONDITION: USED

OVERALL WEIGHT INCLUDING MOTOR: 3000 LBS
OVERALL DIMENSIONS: 66"X77"X115"

PUMP VERTICAL - GOULDS VHS
8X8-22
SERIAL #: 450A527
CASTING #: 62293
750RPM, GPM: 3000
FT.HD: 75 - S.G.: .99
IMPELLER DIA: 22"
MADE IN: USA
DIMENSIONS: 66"X48"X115"

MOTOR - AC - SIEMENS - 150 HP
150HP
1785RPM
FRAME: B445T
460 VOLTS
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: G
MODEL: PE-21 PLUS
TYPE: RGZESD
APPLICATION: BELT - VERTICAL
MADE IN USA
WEIGHT: 1000 LBS
DIMENSIONS: 45"X29"X30"
CONDITION: USED

OVERALL WEIGHT INCLUDING MOTOR: 3000 LBS
OVERALL DIMENSIONS: 66"X77"X115"

IMPELLER - GOULDS 3180 MTX
6X8-14
S/S 316, 5-VANE, 13.5"
PART #: C02730A0-1203
CASTING #: 68074
MADE IN USA
WEIGHT: 36 LBS
OVERALL DIMENSIONS: 14"X4"H
STORE SURPLUS

IMPELLER - GOULDS 3180 MTX
6X8-14
S/S 316, 5-VANE, 13.5"
PART #: C02730A-1203
CASTING #: 68074
MADE IN USA
WEIGHT: 36 LBS
OVERALL DIMENSIONS: 14"X4"H
STORE SURPLUS

SHAFT - GOULDS 3180 XL
S/S
PARTS #: D04859A-2249
TYPE: SOLID
COND: USED
MADE IN USA
WEIGHT: 80 LBS
OVERALL DIMENSIONS: 36.750" L

SHAFT - GOULDS 3180 XL
S/S
PARTS #: D04859A-2249
TYPE: SOLID
COND: USED
MADE IN USA
WEIGHT: 80 LBS
OVERALL DIMENSIONS: 36.750" L

ROTOR - MOYNO PUMP - 2000 SERIES
2F050 - PARTS #: 424049700
ROT 2F050, ALYSTL - S/S
LENGTH: 43"
DIA: 2.825
STORE SURPLUS
WEIGHT: 90 LBS

POWER END - GOULDS - 3500 S
CASTING #: 57866
MADE IN USA
WEIGHT: 300 LBS
OVERALL DIMENSION: 44"X16"
STORE SURPLUS

IMPELLER - GOULDS 3500 STX
3X6-14
S/S, 5-VANE, 14"
PART #: C03262A-1209
MADE IN USA
WEIGHT: 36 LBS
OVERALL DIMENSIONS: 14"X 4"H
STORE SURPLUS

SUBMERSIBLE PUMP, FLYGT - 4"
REF: 3127.180.3066

MOTOR:
10HP
1750RPM
460VOLTS
13 AMPS
60 HZ

MADE IN USA
WEIGHT: 360 LBS
OVERALL DIMENSIONS: 32"X24"X24"
CONDITION: USED

PUMP - GOULDS 3175 M
10X12-18
CASING: 10X12-18, S/S CF8M 316
CASTING #: 56156
IMPELLER: S/S, 4-VANE, 17"
FRONT PLATE: CD4
STUFFING BOX COVER: S/S, 22", BORE: STD
SHAFT: S/S
MADE IN USA
WEIGHT: 1550 LBS
OVERALL DIMENSIONS: 48"X35"X46"
CONDITION: USED

POWER END - GOULDS 3175 M, 22"
D.IRON
S/S SLEEVE
SHAFT: 2.750", STEEL
OVERALL DIMENSIONS: 30"X30"X40"
REFURBISHED

CENTRIFUGAL MULTI-STAGE PUMP - GRAYMILLS - 1" NPT
MODEL: MSPR7-1.5F
MAXIMUM DISCHARGE PRESSURE: 90 PSI
7 STAGES
MSPR: CAST IRON
SHAFT: STAINLESS STEEL
BOWL: STAINLESS STEEL
COLUMN: STAINLESS STEEL
IMPELLER/DIFFUSER: POLYCARBONATE
MOUNT EITHER HORIZONTAL OR VERTICAL

MOTOR: FRANKLIN ELECTRIC
1 1/2HP
3450 RPM
230/460
MODEL: 131007110
FRAME: 56J
3 PH
ENC: TEFC
RATE: CONT
KVA CODE: M
INS: B
MADE IN USA
WEIGHT: 30 LBS
DIMENSIONS: 24"X9"X9"
STORE SURPLUS

VOLUTE - GOULDS 3196 M - 1.5 X 3 - 13
1.5X3-13
S/S
ITEM 100 - PARTS #: 21963-1203
WEIGHT: 100 LBS
OVERALL DIMENSIONS: 21"X17"X7"
STORE SURPLUS

WEARING RING - CASING - GOULDS 3405 L
12X14-14DV
PARTS #: 71855-1203
S/S
STORE SURPLUS

IMPELLER - GOULDS 3175 L
12X14-18
S/S, 4-VANE, 15.750"
ITEM 101 - PART #: 258-100-1203
CASTING #: 55590
STORE SURPLUS

IMPELLER - GOULDS 3175 M
8X10-22
S/S, 4-VANE, 19.250"
ITEM 101 - PARTS #: 259-72-1203
STORE SURPLUS

IMPELLER - GOULDS 3405 L
12X14-14 DV
S/S, 6-VANE, 11"
PART #: 1036644
MADE IN: USA
WEIGHT: 30 LBS
OVERALL DIMENSIONS: 11"D X 7"H
STORE SURPLUS

PUMP DIAPHRAGME - WILDEN PUMPS - 8
FRAME: ALUMINIUM
INLET: 2"
OUTLET: 2"
SERIE #: 0021549370
DESC: T8/AAAAB/TNU/TF/ATF
ITEM: 08-11024
M/O: M577090
DATE: 10/13/14
MADE IN USA
WEIGHT: 60 LBS X18"X16"
OVERALL DIMENSIONS: 27"X18"X16"
CONDITION: USED

PUMP - DURCO - MARK 2 - 3X2-13
VOLUTE: S/S, 3X2X13
IMPELLER: S/S, 5-VANE, 13"
STUFFING BOX COVER: S/S
WEIGHT: 300LB                          
DIMENSION: 30X15X15"                    
MADE IN USA                           
SERIAL #: 112580
ALLOY D4
1750RPM
300 GPM

VOLUTE - ALLIS-CHALMERS 
5X4-17
S/S CF8M
CASTING #: R-52844
WEIGHT: 400 LBS
OVERALL DIMENSIONS: 34"X30"X16"
CONDITION: USED

VOLUTE - BINGHAM
4X6-12
S/S
SERIAL #: 34230497

PUMP - GOULDS 3196 MT
1.5X3-10
ITEM 100 - VOLUTE: 249-60-1203, S/S, 1.5X3-10
CASTING #: 58595
ITEM 101 - IMPELLER: 100-593-1203, S/S, 5-VANE, 9"
CASTING #: 54017
ITEM 184 - BACK PLATE: 100-585-1203, BORE: STD, S/S, 10"
SEAL TYPE: MECHANICAL
SHAFT: S/S
MADE IN CANADA
WEIGHT: 250 LBS
OVERALL DIMENSIONS: 26"X17"X20"

PUMP - GOULDS 3175 M
4X6-14
ITEM 100 - VOLUTE: 258-23-1203
6X4-14, S/S
ITEM 101 - IMPELLER: 257-96-1203
CASTING #: 55922, S/S, 2/4-VANE, 12.5"
ITEM 176 - FRONT PLATE: 104-36-1203, S/S
ITEM 184 - BACK PLATE: 254-104-1203
S/S, 14", BORE: STANDARD
SEAL TYPE: PACKING
SHAFT: S/S
MADE IN: CANADA
WEIGHT: 840 LBS
DIM: 42X22X28
.

PUMP - GOULDS 3175 S
4X6-14
ITEM 100 - VOLUTE: 258-23-1203
CASTING #: 55972, 4X6-14, S/S 
ITEM 101 - IMPELLER: D00137A02-1225
CASTING #: 57585, S/S CG3M, 5-VANE, 11.875" 
ITEM 176 - FRONT PLATE: 104-36-1203
CASTING #: C87366, S/S 
ITEM 184 - BACK PLATE: 254-64-1203
S/S, DIA: 14.250", BORE: STD
SEAL TYPE: MECHANICAL
SHAFT: S/S
MADE IN: USA
WEIGHT: 850 LBS
OVERALL DIMENSIONS: 40"DX27"HX22"L

PUMP - AHLSTROM - APT51-10  
12X10-18
CASING: 141634014, S/S, 12X10-18
IMPELLER: S/S, 5-VANE, 17"
FRONT PLATE: 14172701, S/S 
STUFFING BOX COVER: 283684, S/S, 18" 
MADE IN USA
WEIGHT: 1300 LBS
OVERALL DIMENSIONS: 45X33X40
CONDITION: USED

PUMP - AHLSTROM - APT43-10
12X10-15
CASING: 12X10X15, S/S
CASTING #: 14131
IMPELLER: S/S, 5-VANE, 10"
FRONT PLATE: S/S
CASTING #: 141726
STUFFING BOX COVER: S/S, 15"
SHAFT: STEEL
MADE IN FINLAND
WEIGHT: 900 LBS
OVERALL DIMENSIONS: 42X30X39
CONDITION: USED

PUMP - AHLSTROM - APT53-6 
10X6-21
CASING: S/S, 10X6-21 
CASTING #: 141639
IMPELLER: S/S, 4-VANE, 18.375" 
FRONT PLATE: S/S 
CASTING #: 141721
STUFFING BOX COVER: S/S, 21" 
CASTING #: 283689
SHAFT: S/S
MADE IN FINLAND
WEIGHT: 1100 LBS
OVERALL DIMENSIONS: 40X36X30
CONDITION: USED

VOLUTE - GOULDS 3196 MT
3X4-7
CF8M
ITEM 100 - PARTS #: D00247A02-1203
CASTING #: 57729
MADE IN USA
WEIGHT: 77 LBS
DIM: 20"X14"X6"
STORE SURPLUS

POWER END - GOULDS 3175 M - 22"
MADE IN USA
WEIGHT: 640 LBS
OVERALL DIMENSIONS: 36"X32"X32"
CONDITION: 20%

DYNAMIC SEAL REAR HOUSING ASSEMBLY - GOULDS 3175 M
S/S, 22", DYNAMIC SEAL
PART #: D00698A-01-1203
CASTING #: 58753
MADE IN USA
WEIGHT: 85 LBS
OVERALL DIMENSIONS: 24"X8"
CONDITION: USED

DYNAMIC SEAL BACK COVER - GOULDS 3175 M
S/S - 22"
PART #: C01060A-01
CASTING #: 587531
MADE IN USA
WEIGHT: 60 LBS
OVERALL DIMENSIONS: 24"X4"
CONDITION: USED

IMPELLER - GOULDS 3175
6X8-22
S/S 316, 5-VANE, 22"
PART #: D00125A02-1203
CASTING #: 52747
WEIGHT: 105 LBS
OVERALL DIMENSIONS: 22"X8"
CONDITION: USED

IMPELLER - CANADA PUMP CRE
6X4-13
S/S - 3-VANE - 11.5"
PART #: 52-429-713
THREAD: COARSE .875"-9 UN
COND: STORE SURPLUS

BACK PLATE - CANADA PUMP CRE - 13"
S/S 316 CF8M
CASTING #: G2855
BORE TYPE: STD
CONDITION: USED

PUMP - AHLSTROM - APT32-4C
6X4C-13
CASING PART #: 1422270141 6X4-13, S/S 
IMPELLER PART #: 2838810141 S/S, 4-VANE, 13" 
FRONT PLATE PART #: 2835110141 S/S 
STUFFING BOX COVER PART #: 1420610141 S/S, 13.250" 
SHAFT: S/S
MADE IN USA
WEIGHT: 500 LBS
OVERALL DIMENSIONS: 28"P X 26"H X 26"L
OVERALL CONDITION: USED

PUMP - AHLSTROM - APT32-4
6X4-13
CASING PART #: 1422500141, S/S - CASTING #: A8903A - 6X4-13
IMPELLER PART #: 141928 - S/S, 4-VANE, 11.625"
CASTING PART #: A8903A FRONT PLATE PART #: 141716 - S/S
STUFFING BOX COVER PART #: 141870 S/S, 13"
SHAFT: S/S
MADE IN FINLAND
WEIGHT: 480 LBS
OVERALL DIMENSIONS: 25"X20"X28"
OVERALL CONDITION: USED

SLURRY PUMP - GORMAN RUPP - 12B22-8 - 2"
IMPELLER: 2-VANE, S/S, 6"
FRONT PLATE: S/S
BACK PLATE: S/S
SHAFT: S/S
MADE IN CANADA
DIMENSION: 26"WX30"LX22"H
.
MOTOR - AC - ABB
3HP
1735RPM
FRAME: 182T
575 VOLTS
ENCLOSURE: TEFC
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: K
WEIGHT: 84 LBS
CONDITION: USED

PUMP SLURRY - GORMAN RUPP 12B22-8 - 2"
IMPELLER: 6", 2-VANE, S/S
BACK PLATE:  S/S
SHAFT: S/S
MADE IN: CANADA
DIMENSIONS: 26"X30"X22"H
.
MOTOR - AC - GE 
3HP
1765RPM
FRAME: 182T
575 VOLTS
ENCLOSURE: TEFC
SERVICE FACTOR: 1.15
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: K
MODEL: 5KS182SSP204D8
MADE IN: CANADA
WEIGHT: 76 LBS
CONDITION: USED

FAN PUMP - CANADA PUMPS P-4400
5X4-12
DOUBLE END SUCTION
C.IRON
IMPELLER: S/S, 10.5", CLOSED
BODY: C.IRON
SEAL TYPE: PACKING
SHAFT: S/S
MADE IN CANADA
OVERALL DIMENSIONS: 28"X28"X24"

SLEEVE - WORTHINGTON FRBH-182
3" EXT. X 5.875", 2.625" INT.
PARTS #: 9901703
STORE SURPLUS

VACUUM PUMP - SIEMENS ELMO-F
SIZE: 2BE1705-1BY30
DOUBLE EXTENDED SHAFT
TEST #: 518957
MATERIAL: C.IRON
POSITION: 4
INLET: 14"
OUTLET: 14"
SHAFT DIA: 7.875"
MADE IN GERMANY
WEIGHT: 25500 LBS
OVERALL DIMENSIONS: 142.5"X82"H X83"L
CONDITION: USED

VACUUM PUMP - SIEMENS ELMO-F
SIZE: 2BE1605-1BY30
DOUBLE EXTENDED SHAFT
TEST #: 518964-1982
MATERIAL: C.IRON
POSITION: 4
INLET: 12"
OUTLET: 12"
SHAFT DIA: 7"
MADE IN GERMANY
WEIGHT: 17500 LBS
OVERALL DIMENSIONS: 122"X71"H X71"L
CONDITION: USED

VACUUM PUMP - SIEMENS ELMO-F
SIZE: 2BE1606-1BY30
DOUBLE EXTENDED SHAFT
TEST #: 518966-1982
MATERIAL: C.IRON
POSITION: 4
INLET: 12"
OUTLET: 12"
SHAFT DIA: 7"
MADE IN GERMANY
OVERALL DIMENSIONS: 124"X72"H X72"L
CONDITION: USED

VACUUM PUMP - SIEMENS ELMO-F
SIZE: 2BE1605-1RY30
DOUBLE EXTENDED SHAFT
TEST #: 518962-1982
MATERIAL: C.IRON
POSITION: 4
INLET: 12"
OUTLET: 12"
SHAFT DIA: 7"
MADE IN GERMANY
WEIGHT: 17500 LBS
OVERALL DIMENSIONS: 122"X71"H X71"L
CONDITION: USED

DRIVE ASSY - GORMAN-RUPP - T3A3-B
IMPELLER: IRON, 2-VANE, 8.750"
SHAFT: STEEL
MADE IN USA
WEIGHT: 90 LBS
OVERALL DIMENSIONS: 20"X12"X12"
CONDIITON: USED

PUMP - GOULDS 3196 MTX
4x6-10
ITEM 100 - VOLUTE: D03123A-1203, S/S, 4X6-10  
ITEM 101 - IMPELLER: 140-146-34-1203, S/S, 6-VANE, 9.250" 
ITEM 184 - BACK PLATE: 100-586-1012, D.IRON, BORE: STD, 10" 
SEAL TYPE: PACKING GLAND
SHAFT: STEEL
MADE IN USA
WEIGHT: 340 LBS
OVERALL DIMENSIONS: 32"X24"X24"
CONDITION: USED

PUMP - SULZER BINGHAM - CZ80-400
5x3-16

CASING: 5X3-16, D.IRON, COND: 30%

IMP: S/S, 5-VANE CLOSED, 13", COND: 15%

STUFFING BOX COVER: D.IRON, 16", COND:30%

SHAFT: STEEL
MADE IN USA
WEIGHT: 440 LBS
CONDITION: USED

PUMP - SULZER - CZ60-315
4x3-13

CASING: 4x3-13, FONTE, COND: 20%

IMPELLER PART #: 54667001 4008
S/S, 5-VANE CLOSED, 12.375", COND: 20%

STUFFING BOX COVER: D.IRON, 13", COND: 30%

SEAL: PACKING
SHAFT: STEEL
MADE IN USA
WEIGHT: 340 LBS
OVERALL DIMENSIONS: 26"X20"X20"
CONDITION: USED

PUMP - SULZER - CZ125-315
6x4-12

CASING: 6X4-12, IRON, COND: 40%

IMPELLER: S/S, 6-VANE CLOSED, 10", COND: 15%

STUFFING BOX COVER: IRON, 12", COND: 40%

SHAFT: STEEL
WEIGHT: 400 LBS
OVERALL DIMENSIONS: 30"X22"X22"
CONDITION: USED

VACUUM PUMP - NASH CL3001
TEST #: 82N0025
450RPM
INLET: 8"
OUTLET: 6"
MADE IN BELGIUM
CONDITION: USED

PUMP - GOULDS 3175 S
4x6-18

ITEM 100 - VOLUTE: PEERLESS
4X6-18, D.IRON, COND: 40%

ITEM 101 - IMPELLER: 257-97-1203
S/S, 2/4-VANE, 15", COND: 30%
CASTING #: 55923

ITEM 176 - FRONT PLATE: 104-37-1203
S/S 316 CF8M, COND: 40%
CASTING #: 7580363

ITEM 184 - BACK PLATE: 254-66-1203
S/S, 18", BORE: S, COND: 40%

SEAL TYPE: PACKING
SHAFT: STEEL
MADE IN USA
WEIGHT: 1080 LBS
OVERALL DIMENSIONS: 30"X24"X24"
CONDITION: USED

HIGH PRESSURE PUMP - CARVER PUMP - 3x2-6
TYPE: RS6-B
SIZE TYPE: 3X2X6
D.IRON
STAGE: 6
INLET DIA: 4"
OUTLET DIA: 3"
SHAFT DIA: 1.250"
CAPACITY GPM: 158
CAPACITY PRESSURE: 1155' (TDH)
SERIAL #: 204378-1A
MADE IN USA
WEIGHT: 380 LBS
OVERALL DIMENSIONS: 37"X14"X14"
CONDITION: USED

FAN PUMP - SULZER - ZBGXV-450
20x16-22
TYPE: ZBGXV-450, YEAR: 1978
BODY: D.IRON, COND: 15%
SEAL TYPE: PACKING
SHAFT: STEEL
MADE IN USA
WEIGHT: 4000 LBS
OVERALL DIMENSIONS: 63"X58"X40"H
CONDITION: USED

PUMP - GOULDS 3196 M
1.5X3-6
ITEM 100 - VOLUTE: 104-421-1012, D.IRON,1.5X3-6
CASTING #: 53785
ITEM 101 - IMPELLER: 76777-1013, D.IRON, 5-VANE, 6"
ITEM 184 - BACK PLATE: 100-107-1012, BORE: STD, D.IRON, 6"
SEAL TYPE: PACKING GLAND
SHAFT: STEEL
.
MOTOR - AC - WEG
20HP, 1.5KW
1755RPM
FRAME: 145T
575 VOLTS
ENCLOSURE: TEFC
SERVICE FACTOR: 1.25
INSULATION CLASS: F
3 PH, 60 HZ
DUTY: CONT
DESIGN: B
CODE: K
MODEL: FH21507
.
MOUNTED ON GOULDS BASE PLATE WITH PUMP
MADE IN USA
WEIGHT: 380 LBS
OVERALL DIMENSIONS: 45"X13"X20"
CONDITION: USED

PUMP POWER END - HAYWARD GORDON
6 X 4 - 10
MADE IN CANADA
OVERALL CONDITION: USED

STUFFING BOX COVER - WORTHINGTON 18"
MODEL: FRBH-182
S/S
PARTS #: 2113738
COND USED