Complete

AGITATOR MIXPRO 20 VST
MODEL: 20 VST
IMPELLER DIA: 21.5", 3 BLADES, S/S
332RPM
SERIAL#: U01C001-01A
SHAFT LENGTH: 20"

***NO MOTOR***, RELIANCE
LAST USED WITH 5HP MOTOR
FRAME: L184T
DRIVE (MOTOR) PULLEY: 3.5", 3.5-3V-3-QN
DRIVEN (AGITATOR) PULLEY: 19", 19.0-3V-3-SF

MOTOR AGITATOR NEPTUNE AG-1.0
MOTOR 1/4 HP
RPM: 1725
VOLTS: 115/230
AGITATOR
SERIAL #: 53136
RPM: 350

AGITATOR MOTOR, LIGHTNIN ND 2A
MOTOR: 3/4 HP
RPM: 1725
BATIT: M56C
VOLTS: 550
AMP: 1.38
TYPE P
I.D. 429195SC-13
AGITATOR
SERIAL #; 771023X

AGITATOR MOTOR LIGHTNIN N-C-4
TAMPER 1/4 HP
1725RPM
VOLTS: 115/230
AMP: 4.6/2.3
MODEL: 945-90-A
AGITATOR SERIAL #: 271139X

AGITATOR LIGHTNIN XJC-65
RPM:1725 SER:85/245267
MOTOR 3/4 HP
VOLTS:230/460 AMPS:3.44/1.72
HZ:60
FRAME:M560 IDENT:416777P08 TYPE P

AGITATOR; LIGHTNIN; XJ-65
RPM:1725/1425 SER:90/80914
MOTOR .65 HP SER:5K43NG6426V
VOLTS:208-220/440 AMPS:2.5-2.4/1.2
S.F.:1.15 HZ:60/50

AGITATOR LIGHTNIN XJ-65
RPM:1725/1425 SER:89/809014
MOTOR .65 HP SER. NO.:B77R3046M-RQ
VOLTS:208-220/440 AMPS:2.4-2.4/2.2
SHAFT DIAM.:13/16" LONG:31"
3 PALES 10" DIAM.
FRAME:FM56C

AGITATOR; LIGHTNIN; VSES-3
HP:3 RPM:1750 IN
P.D. DRIVEN SHEAVE:3.6 RPM:420 OUT
P.D. DRIVEN SHEAVE:15.0 WITH MOTOR
BELT SIZE:A-60 SERIE:160247

AGITATOR LIGHTNIN VSE-15
SERIAL #: 590032 MODEL: VSE-15
HP 15 BELT: B-90
INPUT: RPM 1750 OUTPUT: RPM 420
IMPELLER S/S 3 PALM, 21"
P.D. DRIVE SHEAVE 6"
P.D. DRIVEN SHEAVE 25"

AGITATOR - LIGHTNIN VSE-15
S/N 59003
MODEL: VSE-15
HP 15
BELT B-90
INPUT RPM 1750
OUTPUT RPM 420
IMPELLER, SS, 3 PALM, 21"
P.D. DRIVE SHEAVE 6"
P.D. DRIVEN SHEAVE 25"

AGITATOR LIGHTNIN SGS-75
HP:3/4 RPM:1725
MODEL:976-90A IMPELLER:14.000"
MOTOR SERIE:171469

AGITATOR LIGHTNIN ND 1
RPM:1725 SER:82/156121
MOTOR 1/3 HP
VOLTS:115 AMPS:6.6
IDENT.:D76R4504M-XH
SER. NO.:82/156121

AGITATOR; LIGHTNIN; NAG-100
RPM:1725/1425 SER:85/234083
MOTOR .87 HP SER. NO.:5K43PG6373AV
VOLTS:208-230/460 AMPS:3.0-2.8/1.4
S.F.:1.15 HZ:60/50

AGITATOR - LIGHTNIN - 2-VS-40
TYPE: HORIZONTAL
- WITHOUT IMPELLER

- WITHOUT MOTOR:
40 HP
INPUT: 1750 RPM, OUTPUT: 335 RPM
BELT SIZE: 5V1400
MADE IN TORONTO, ONTARIO

AGITATOR 2-VS-40 LIGHTNIN
HP:40 RPM:1200 IN
P.D. DRIVEN SHEAVE:9.00 RPM:355 OUT
P.D. DRIVEN SHEAVE:31.5 BELT SIZE:5V1250
RPM:900 IN SERIE:971647

AGITATOR 2 VS 30 LIGHTNIN
HP: 30
S/N: 770824
INPUT RPM: 1800
OUTPUT RPM: 327
IMPELLER: 28", 3-VANE, S/S
SHEAVE SIZE: 5V 1400
SHEAVE DIA: 37.5"
MOTOR SHEAVE DIA: 7.125"

AGITATOR - LIGHTNIN 2 VS 30
S/N 770827
MODEL 2 VS 30
HP 30
BELT 5V 1400
INPUT RPM 1800
OUTPUT RPM 327
IMPELLER: S/S, 3-VANE, 28"
PULLEY 5V 37.5"

AGITATOR; LIGHTNIN; 2-VS-15
HP:15 RPM:1800 IN
P.D. DRIVEN SHEAVE:4.75 RPM:333 OUT
P.D. DRIVEN SHEAVE:25.0 BELT SIZE:3V900
RPM:1200 IN

AGITATOR; LIGHTNIN; 2-VS-10
HP:10 RPM:960 IN
P.D. DRIVEN SHEAVE:4.5 RPM:170 OUT
P.D. DRIVEN SHEAVE:25.0 BELT SIZE:1000
SERIE:L105015

AGITATOR - LIGHTNIN
TYPE: HORIZONTAL
WITHOUT IMPELLER

PREVIOUSLY USED WITH MOTOR:
20 HP
INPUT: 1800 RPM, OUTPUT: 357 RPM
BELT SIZE: 3V900
MADE IN CANADA

AGITATOR INDUSTRIAL PROCESS ENGINEERS

AGITATOR IMPCO
STAINLESS STEEL SHAFT WITH PILLOW BLOCK

AGITATOR HYMAC MIXER, 30"
MODEL: 30 FB 2025
WITHOUT IMPELLER

AGITATOR IMPELLER: S/S, 3 PALM, 24"

AGITATOR
MODEL
IMPELLER SS 3 PALM 22.000"

AGITATOR - BLACK CLAWSON MIXER 54" - 75 HP
MODEL: WD6-54 AGITGEC
IMPELLER NOT INCLUDED      
C/C BRG : 56"                           
BEARING TO IMPELLER CENTER : 72"                         
SHAFT TAPER AT SMALL END: APROX 3.704"     
SHAFT TAPER AT LARGE END: APROX. 4.278"
NO KEY WAY ON IMPLELLER SHAFT SIDE               
SLEEVE PACKING HAS VISIBLE WEAR       

BROKE PULPER - BELOIT - SHARK 3796 
TURNS CLOCKWISE 
IMPELLER DIA: 44", S/S, 6-VANE 
HOLE DIA: 5/8" 
PLATE WITH HEAT TREATMENT 
SERIAL #: 97H348-01 
. 
PULLEY DIA: 44.5" WITH 8 BELTS

BROKE PULPER - BELOIT - SHARK 3796 
TURNS COUNTER CLOCKWISE 
IMPELLER DIA: 44", S/S, 6-VANE 
HOLE DIA: 5/8" 
PLATE WITH HEAT TREATMENT 
SERIAL #: EO 4511 
COND: 10% 
. 
PULLEY DIA: 44.5" WITH 8 BELTS

SAFTY GUARD - AGITATOR AGITEC II - BLACK CLAWSON - 42"
FOR AGITATOR # 101155 - #101156 - #101157
FOR PULLEY 50" # 101181 - # 101182
STEEL
CONDITION: USED

SAFTY GUARD - AGITATOR AGITEC II - BLACK CLAWSON
FOR AGITATOR # 101155 - #101156 - #101157
FOR PULLEY 50" # 101181 - # 101182
STEEL
CONDITION: USED

SAFTY GUARD - AGITATOR AGITEC II - BLACK CLAWSON - 42"
FOR AGITATOR # 101155 - #101156 - #101157
FOR PULLEY 50" # 101181 - # 101182
STEEL
CONDITION: USED

AGITATOR - BLACK CLAWSON - AGITEC II - 42"
# SERIAL: 94 NY 5889
SHAFT AT IMPELLER: 3.344"
SHAFT AT COUPLING: 3.940"
KEY PATH: 1" X 8"
SLEEVE: 4.452"
# BEARING CARTRIDGE: SAF 622
SAFTY GUARD - AGITATOR AGITEC II - BLACK CLAWSON: **SKU 101189**
CONDITION: USED

AGITATOR - BLACK CLAWSON - AGITEC II - 42"
# SERIAL: 94 NY 5888
SHAFT AT IMPELLER: 3.344"
SHAFT AT COUPLING: 3.940"
KEY PATH: 1" X 8"
SLEEVE: 4.452"
# BEARING CARTRIDGE: SAF 622
SAFTY GUARD - AGITATOR AGITEC II - BLACK CLAWSON: **SKU 101188**
CONDITION: USED

AGITATOR - BLACK CLAWSON - AGITEC II - 42"
# SERIAL: 94 NY 5887
SHAFT AT IMPELLER: 3.344"
SHAFT AT COUPLING: 3.940"
KEY PATH: 1" X 8"
SLEEVE: 4.452"
# BEARING CARTRIDGE: SAF 622
SAFTY GUARD - AGITATOR AGITEC II - BLACK CLAWSON: **SKU 101187**
CONDITION: USED

AGITATOR - PROCHEM - PV SL-3-350
PULLEY 2V - 14"
SHAFT: 1.5"
RPM: 1750
RATIO: 4.73
OUTPUT RPM: 370
SIZE-TYPE: PV SL-3-350
SERIAL NO: 4935
HP RATING: 3
ORDER NO. :81-4 2 72
SERVICE FACTOR: 1.32
CONDITION: USED

AGITATOR - GREEY - 246-VSE-30
30"
STAINLESS STEEL
PROPELLER DIA: 30" - STAINLESS
SHAFT LENGTH: 33" - PALM: 3
MADE IN: CANADA
WEIGHT: 900 LBS
OVERALL DIMENSIONS: 48"X 48"X 84"
CONDITION: USED

AGITATOR - GREEY - MODELE: 2-VS-30
IMPELLER: NO
SHAFT LENGTH: 33"
CONDITION: USED

AGITATOR - GREEY LIGHTNIN - 2-VS-30
STAINLESS STEEL
IMPELLER: STAINLESS - 25"
SHAFT LENGTH: 33" - 3 PALM

MOTOR - WEG
10 HP - 1172 RPM - VOLTS: 575
PHASE: 3 - DUTY: 1.15
SERIAL #: 8079-3
HZ: 60 - ISO CLASS: F - TEMP AMB: 40

MADE IN: CANADA
WEIGHT: 1150 LBS
OVERALL DIMENSIONS: 48X48X78
CONDITION: USED