Stock prep equipment

BASKET; BALCK CLAWSON, 24PS
SLOT 0.014"
SERIAL # 05.0236986
INSIDE DIA. 23.750"
OUTSIDE DIA. 24.937" HIGHT; 5 SEGMENTS
PS FILLER SCREEN BASKET 0.014" SLOT X
23-3/4"ID X 24-15/16"HI [5 SLOTS/INCH]
PS24 LEHMAN FOR BLACK CLAWSON SCREEN

BASKET, BLACK CLAWSON, PH-24, USED
HOLE BASKET WITH UP BARS:0.062", D24244
PARTS#: 3004933

SLOTTED BASKET, BLACK CLAWSON, PSL-24
MODEL #: 990582-10777-1198-0.25T3.2
SLOT SIZE: 0.635 MM (0.025")
HEIGHT: 70 MM
BASKET DIA.EXT: 650MM
INT: 605MM
HEIGHT: 632 MM

BASKET(SLOT),0.019", PS24, BLACK CLAWSON
DIA.INT:23.500", HEIGHT:24.500"
US PATENT 4.954.249 5.041.212
5.041.214 5.023.986
BELWAVE USSN 07/206.151

BASKET(SLOT), 0.012", BLACK CLAWSON, 24P
DIA.INT:23.500",HEIGHT:24.5"

BASKET, BLACK CLAWSON, UV-200
HOLE SIZE: 1.4 mm
OPEN AREA: 16%
MAT: S/S
PARTS #: 31-5895-000-5-195-1.4-16
M015564 ,1.4MM ,16%, OA HT.

BASKET AFT, HOLE 0.055", KADANT BLACK CLAWSON - UV-200
16% OPEN AREA, UP-BARS STYLE
INSIDE Ø 23½", 17" HIGH
BLACK CLAWSON, UV-200, M014283 0.055"
MADE IN CANADA

ROTOR LOBE BLACK CLAWSON ULTRA 1
93817/238/534
DIA. EXT; 15 5/8"
HAUT: 9 3/4"
DIA. SHAFT: 2.200"

BASKET SLOTED 0.012", KADANT BLACK CLAWSON, MODEL: UV - 500
UV 500 R PRO-406 0.012 HC 2005-00805 CW 796
USED

ROTOR, LP FOIL ROTOR, KADANT BLACK CLAWSON, UV - 500
REF: 57089
USED

RING, SCREEN CYLINDER CLAMPING RING
BLACK CLAWSON UV-300
2006042

BEARING HOUSING, BLACK CLAWSON, UV-200
COMPLETE DRIVE ASSEMBLY

ROTOR - BLACK CLAWSON - UV-200
MAT: S/S
MODEL: NS II

PRESSURE SCREEN ROTOR, KADANT BLACK CLAWSON, ULTRA III
MAT: S/S
KEYWAY: 0.750"
New Store Surplus

BEARING HOUSING ASSEMBLY, PRESSURE SCREEN
KADANT BLACK CLAWSON PS24
BLACK CLAWSON PH24

ROTATING ASSEMBLY, FOR FLOAT PURGER MODEL: 150-34 

PRESSURE SCREEN, BLACK CLAWSON PS 24P
MOTOR & MOUNTING SUPPORT
ROTOR: BLADE
NO BASKET
DRIVEN PULLEY
BODY S/S
INPUT/OUTPUT: 12"

MOTOR AC:
20 HP
1175 RPM
FRAME: 286T
575 VOLTS
ENCLOSURE: TEFC
3 PH, 60 HZ
19.4 AMPS

REFINER, BLACK CLAWSON, TWIN HYDRADISC, 34EM
SIZE: 34"
SN: SNC 612

RAGGER IDLER WHEEL

PULPER DRIVE - KADANT BLACK-CLAWSON - HYDRAPULPER #3
HP: 300
RATIO: 4:1
SERIAL #: P551345
*** NO INPUT SHAFT ***

HYDRAPULPER - BLACK CLAWSON - #3 DRIVE 
RATIO: 3.53:1 
REFURBISHED

PULPER DRIVE, HYDRAPULPER, KADANT, BLACK CLAWSON, SIZE 300
RATIO: 5.4:1
RATED HP: 300HP
ROTATION CCW
SERIAL #: 97 -R300-0310
INPUT SHAFT DIAMETER: 3.5", KEY WAY: 0.875"
OUTPUT SHAFT DIAMETER: 5" TO 3.875", LENGTH 15.5", KEY WAY: 1.250"

PULPER DRIVE, HYDRAPULPER, KADANT, BLACK CLAWSON, SIZE 300
RATIO: 5.4:1
RATED HP: 300HP
ROTATION CCW
SERIAL #: 96 -R300-0342
INPUT SHAFT DIAMETER: 3.5", KEY WAY: 0.875"
OUTPUT SHAFT DIAMETER: 5" TO 3.875", LENGTH 15.5", KEY WAY: 1.250"

WEAR PLATE, PULPER 3 PIECE VOKES ROTOR,
58.750" OD X 0.750" (3/4) THICK
Stainless Steel, 410 S/S
Store Surplus

ROTOR HUB, FOR VOKES ROTOR,
PULPER 3 PIECE ROTOR, KADANT BLACK CLAWSON 20', CCW, ± 87¾" - 89",
8 VANES,
Stainless Steel,
Torque pins included
Leveling screws excluded
2 AVAILABLE
1 REFURBISHED
1 USED CONDITION

PULPER EXTRACTION PLATE, 1/2" (THE ONE ON THE BOTTOM). 
HOLES DIAMETER: 1/2". 
PLATE MATERIAL 410 S/S,
HEATED TREATED. 
EXTERNAL DIAMETER: 92.943". 
INTERNAL DIAMETER: 59". 
STORE SURPLUS

PULPER EXTRACTION PLATE, 3/8" (THE ONE ON THE TOP) HOLES DIAMETER, 
MATERIAL: 410 S/S, 
HEATED TREATED, HARDENED AND GROUND. 
EXTERNAL DIAMETER: 92.943" 
INTERNAL DIAMETER: 59" 
STORE SURPLUS

PULPER ROTOR - VOKES ROTOR - KADANT BLACK CLAWSON - 68"
STAINLESS STEEL AND HARD FACING
SUITED MODEL HYDRAPULPER # 3

PULPER ROTOR, HYDRAPULPER, KADANT, BLACK CLAWSON, SIZE 42"
ROTOR 42", 8-VANE
USED, FOR DRIVE ITEM: 62422 AND 62423
NO BAFFLES, ROTATION CCW, STAINLESS STEEL
TAPER HUB

PULPER ROTOR, HYDRAPULPER, KADANT, BLACK CLAWSON, SIZE 42"
ROTOR 42", 8-VANE
REBUILT, FOR DRIVE ITEM: 62422 AND 62423
NO BAFFLES, ROTATION CCW, STAINLESS STEEL
TAPER HUB

PULPER ROTOR - KADANT BLACK CLAWSON - 42" STAINLESS STEEL AND HARD FACING 8-VANE,
WITH BAFFLES OF 4"
SHAFT BORE DIAMETER 4.250"
ROTATION CCW
REFURBISHED STORE SURPLUS

PULPER ROTOR, BLACK CLAWSON, 42"
ONE PIECE POWR-SAVR ROTOR
8-Vane, 4" BAFFLES
Stainless Steel, Rotation CCW
BORE DIAMETER: 4.250"

PULPER - BLACK CLAWSON - 20'
CAPACITY: 425 TPD AT 3%
HYMAC TURBOFLEX RETROFIT BLACK CLAWSON
LOW CONSISTENCE, TYPE CONTINOUS 425 TPD
INTERIOR AND EXTERIOR MATERIAL: S/S
1- PULPER BOTTOM ACCEPT CHAMBER
1- PULPER IN 3 PIECES - 3 SIDES UPRIGHT
1- VOKES ROTOR, 87-87.5", 8-VANES, S/S
1- PLUG MADE OF CARBON STEEL
1- (4X) PULPER LEGS
1- WEAR PLATE
1- EXTRACTION PLATE

PULPER, HYDRAPULPER, BROCK PULPER UNIT REBUILT
12' HCV, 42" ROTOR
316 S/S TANK, 5' HIGH, ¼" SIDE THICKNESS
DRIVE ASSEMBLY DWG CA3316
6 X SUPORTING LEGS, MTL: IRON 5' HIGH
WAS USED WITH A MOTOR 250 HP 1200 RPM
TUB IN 2 SECTION BOTTOM TUB 3/8" THICKNESS, S/S
JUNK TRAP: 8"
DILUTION WATER INLET 8"
STOCK ACCEPT OUTLET: 12"
V DRIVER SHEAVE

PULPER, HYDRAPULPER, KADANT BLACK CLAWSON, SIZE 12'
IRON
S/N: P70-2984
DIAMETER: 12'
EFFECTIVE HEIGHT: 7'
PULP VOLUME: 19.8 m³
RETENTION TIME: 7 TO 9 min
OPERATION CONSISTENCY: 3.5 TO 4.5 %
CAPACITY: OCC 165 T/J

AGITATOR - BLACK CLAWSON MIXER 54" - 75 HP
MODEL: WD6-54 AGITGEC
IMPELLER NOT INCLUDED      
C/C BRG : 56"                           
BEARING TO IMPELLER CENTER : 72"                         
SHAFT TAPER AT SMALL END: APROX 3.704"     
SHAFT TAPER AT LARGE END: APROX. 4.278"
NO KEY WAY ON IMPLELLER SHAFT SIDE               
SLEEVE PACKING HAS VISIBLE WEAR       

BASKET PRESSURE SCREEN - BLACK CLAWSON - UV 300
BASKET TYPE: HOLES - 2mm
MODEL #: K-TEC T0844102, SERIAL #: 369-C
BASKET DIMENSIONS:
INT: 23.625" - EXT: 27" - HEIGHT: 25.500"
MADE IN USA
WEIGHT: 180 LBS
OVERALL DIMENSIONS: 25.500"X 27"
CONDITION: 10%

PRESSURE SCREEN - BLACK CLAWSON - PS36
ROTOR TYPE: FOIL
BASKET TYPE : SLOTTED
SLOT SIZE: 0.35MM
P/N: 4015042-000
S/N: 5183L
BASKET DIAMETER: 36"
INT: 36" - EXT: 39-1/2" - HEIGHT: 43"
INLET: 18" - OUTLET: 18"
REJECT: 4"
CONDITION: USED

VOKES ROTOR HUB - BLACK CLAWSON - 16'
STEEL
DIMENSION INT: 7.200" - EXT: 11.750" - BASE: 13.000"
KEY PATH: 1.500"
FOR HYDRAPULPER III
CONDITION: USED

VOKES ROTOR COVER - BLACK CLAWSON - 68"
S/S - FOR IMPELLER 68"
CONDITION: USED

PULPER SCREEN PLATE - BLACK CLAWSON - 70"
FOR 16' PULPER
S/S - 70"
MADE IN USA
CONDITION: USED

VOKES ROTOR - BLACK CLAWSON - 68"
FOR 16' PULPER
S/S - 68"
MADE IN USA
CONDITION: USED

HYDRAPULPER DRIVE BASE STAND BLACK CLAWSON - SIZE 3
HYDRAPULPER # 3
CONDITION: USED

BASKET - PRESSURE SCREEN - BLACK CLAWSON - 36P1
BASKET TYPE: SLOTTED - WIDTH: 0.38MM
MODEL: 36P1
DIMENSION INT: 36" - EXT: 39" - SIZE: 43"
CONDITION: USED

BASKET - PRESSURE SCREEN - BLACK CLAWSON - PS/PH 36
MODEL: PS/PH36
BASKET: SLOTTED - WIDTH:0.35MM
BASKET MODEL: PS/PH36 - # SERIAL: 12762
DIMENSION INT.: 35-3/4" - EXT: 38-1/4" - HEIGHT: 42-3/4"
CONDITION: STORE SURPLUS

SAFTY GUARD - AGITATOR AGITEC II - BLACK CLAWSON - 42"
FOR AGITATOR # 101155 - #101156 - #101157
FOR PULLEY 50" # 101181 - # 101182
STEEL
CONDITION: USED