Stock prep equipment

PRESSURE SCREEN ROTOR, KADANT BLACK CLAWSON, ULTRA III
MAT: S/S
KEYWAY: 0.750"
New Store Surplus

PULPER - BLACK CLAWSON - 20'
CAPACITY: 425 TPD AT 3%
HYMAC TURBOFLEX RETROFIT BLACK CLAWSON
LOW CONSISTENCE, TYPE CONTINOUS 425 TPD
INTERIOR AND EXTERIOR MATERIAL: S/S
1- PULPER BOTTOM ACCEPT CHAMBER
1- PULPER IN 3 PIECES - 3 SIDES UPRIGHT
1- VOKES ROTOR, 87-87.5", 8-VANES, S/S
1- PLUG MADE OF CARBON STEEL
1- (4X) PULPER LEGS
1- WEAR PLATE
1- EXTRACTION PLATE

PULPER, HYDRAPULPER, BROCK PULPER UNIT REBUILT
12' HCV, 42" ROTOR
316 S/S TANK, 5' HIGH, ¼" SIDE THICKNESS
DRIVE ASSEMBLY DWG CA3316
6 X SUPORTING LEGS, MTL: IRON 5' HIGH
WAS USED WITH A MOTOR 250 HP 1200 RPM
TUB IN 2 SECTION BOTTOM TUB 3/8" THICKNESS, S/S
JUNK TRAP: 8"
DILUTION WATER INLET 8"
STOCK ACCEPT OUTLET: 12"
V DRIVER SHEAVE

PULPER, HYDRAPULPER, KADANT BLACK CLAWSON, SIZE 12'
IRON
S/N: P70-2984
DIAMETER: 12'
EFFECTIVE HEIGHT: 7'
PULP VOLUME: 19.8 m³
RETENTION TIME: 7 TO 9 min
OPERATION CONSISTENCY: 3.5 TO 4.5 %
CAPACITY: OCC 165 T/J

PULPER DRIVE, HYDRAPULPER, KADANT, BLACK CLAWSON, SIZE 300
RATIO: 5.4:1
RATED HP: 300HP
ROTATION CCW
SERIAL #: 96 -R300-0342
INPUT SHAFT DIAMETER: 3.5", KEY WAY: 0.875"
OUTPUT SHAFT DIAMETER: 5" TO 3.875", LENGTH 15.5", KEY WAY: 1.250"

PULPER DRIVE, HYDRAPULPER, KADANT, BLACK CLAWSON, SIZE 300
RATIO: 5.4:1
RATED HP: 300HP
ROTATION CCW
SERIAL #: 97 -R300-0310
INPUT SHAFT DIAMETER: 3.5", KEY WAY: 0.875"
OUTPUT SHAFT DIAMETER: 5" TO 3.875", LENGTH 15.5", KEY WAY: 1.250"

PULPER EXTRACTION PLATE, 1/2" (THE ONE ON THE BOTTOM). 
HOLES DIAMETER: 1/2". 
PLATE MATERIAL 410 S/S,
HEATED TREATED. 
EXTERNAL DIAMETER: 92.943". 
INTERNAL DIAMETER: 59". 
STORE SURPLUS

PULPER EXTRACTION PLATE, 3/8" (THE ONE ON THE TOP) HOLES DIAMETER, 
MATERIAL: 410 S/S, 
HEATED TREATED, HARDENED AND GROUND. 
EXTERNAL DIAMETER: 92.943" 
INTERNAL DIAMETER: 59" 
STORE SURPLUS

PULPER ROTOR, BLACK CLAWSON, 42"
ONE PIECE POWR-SAVR ROTOR
8-Vane, 4" BAFFLES
Stainless Steel, Rotation CCW
BORE DIAMETER: 4.250"

PULPER ROTOR, HYDRAPULPER, KADANT, BLACK CLAWSON, SIZE 42"
ROTOR 42", 8-VANE
USED, FOR DRIVE ITEM: 62422 AND 62423
NO BAFFLES, ROTATION CCW, STAINLESS STEEL
TAPER HUB

PULPER ROTOR, HYDRAPULPER, KADANT, BLACK CLAWSON, SIZE 42"
ROTOR 42", 8-VANE
REBUILT, FOR DRIVE ITEM: 62422 AND 62423
NO BAFFLES, ROTATION CCW, STAINLESS STEEL
TAPER HUB

PULPER ROTOR - KADANT BLACK CLAWSON - 42" STAINLESS STEEL AND HARD FACING 8-VANE,
WITH BAFFLES OF 4"
SHAFT BORE DIAMETER 4.250"
ROTATION CCW
REFURBISHED STORE SURPLUS

PULPER ROTOR - VOKES ROTOR - KADANT BLACK CLAWSON - 68"
STAINLESS STEEL AND HARD FACING
SUITED MODEL HYDRAPULPER # 3

PULPER SCREEN PLATE - BLACK CLAWSON - 70"
FOR 16' PULPER
S/S - 70"
MADE IN USA
CONDITION: USED

REFINER, BLACK CLAWSON, TWIN HYDRADISC, 34EM
SIZE: 34"
SN: SNC 612

REJECT JUNK TRAP - KADANT BLACK CLAWSON - UV-200
EXIT: 4"
DI
CONDITION: USED

REJECT JUNK TRAP - KADANT BLACK CLAWSON - UV-200
EXIT: 4"
IRON
CONDITION: USED

ROTATING ASSEMBLY, FOR FLOAT PURGER MODEL: 150-34 

ROTOR - BLACK CLAWSON - UV-200
MAT: S/S
MODEL: NS II

ROTOR HUB, FOR VOKES ROTOR,
PULPER 3 PIECE ROTOR, KADANT BLACK CLAWSON 20', CCW, ± 87¾" - 89",
8 VANES,
Stainless Steel,
Torque pins included
Leveling screws excluded
2 AVAILABLE
1 REFURBISHED
1 USED CONDITION

ROTOR LOBE BLACK CLAWSON ULTRA 1
93817/238/534
DIA. EXT; 15 5/8"
HAUT: 9 3/4"
DIA. SHAFT: 2.200"

SAFTY GUARD - AGITATOR AGITEC II - BLACK CLAWSON
FOR AGITATOR # 101155 - #101156 - #101157
FOR PULLEY 50" # 101181 - # 101182
STEEL
CONDITION: USED

SAFTY GUARD - AGITATOR AGITEC II - BLACK CLAWSON - 42"
FOR AGITATOR # 101155 - #101156 - #101157
FOR PULLEY 50" # 101181 - # 101182
STEEL
CONDITION: USED

SAFTY GUARD - AGITATOR AGITEC II - BLACK CLAWSON - 42"
FOR AGITATOR # 101155 - #101156 - #101157
FOR PULLEY 50" # 101181 - # 101182
STEEL
CONDITION: USED

TAIL CUTTER - BLACK CLAWSON
100"LX45"X12"H
WEIGHT: 3400 LBS
CONDITION: USED

VOKES ROTOR - BLACK CLAWSON - 68"
FOR 16' PULPER
S/S - 68"
MADE IN USA
CONDITION: USED

VOKES ROTOR COVER - BLACK CLAWSON - 68"
S/S - FOR IMPELLER 68"
CONDITION: USED

VOKES ROTOR HUB - BLACK CLAWSON - 16'
STEEL
DIMENSION INT: 7.200" - EXT: 11.750" - BASE: 13.000"
KEY PATH: 1.500"
FOR HYDRAPULPER III
CONDITION: USED

WEAR PLATE, PULPER 3 PIECE VOKES ROTOR,
58.750" OD X 0.750" (3/4) THICK
Stainless Steel, 410 S/S
Store Surplus