Stock prep equipment

BASKET; BALCK CLAWSON, 24PS
SLOT 0.014"
SERIAL # 05.0236986
INSIDE DIA. 23.750"
OUTSIDE DIA. 24.937" HIGHT; 5 SEGMENTS
PS FILLER SCREEN BASKET 0.014" SLOT X
23-3/4"ID X 24-15/16"HI [5 SLOTS/INCH]
PS24 LEHMAN FOR BLACK CLAWSON SCREEN

BASKET AFT, HOLE 0.055", KADANT BLACK CLAWSON - UV-200
16% OPEN AREA, UP-BARS STYLE
INSIDE Ø 23½", 17" HIGH
BLACK CLAWSON, UV-200, M014283 0.055"
MADE IN CANADA

BASKET SLOTED 0.012", KADANT BLACK CLAWSON, MODEL: UV - 500
UV 500 R PRO-406 0.012 HC 2005-00805 CW 796
USED

ROTOR, LP FOIL ROTOR, KADANT BLACK CLAWSON, UV - 500
REF: 57089
USED

RING, SCREEN CYLINDER CLAMPING RING
BLACK CLAWSON UV-300
2006042

BEARING HOUSING, BLACK CLAWSON, UV-200
COMPLETE DRIVE ASSEMBLY

PRESSURE SCREEN ROTOR, KADANT BLACK CLAWSON, ULTRA III
MAT: S/S
KEYWAY: 0.750"
New Store Surplus

BEARING HOUSING ASSEMBLY, PRESSURE SCREEN
KADANT BLACK CLAWSON PS24
BLACK CLAWSON PH24

ROTATING ASSEMBLY, FOR FLOAT PURGER MODEL: 150-34 

PRESSURE SCREEN, BLACK CLAWSON PS 24P
MOTOR & MOUNTING SUPPORT
ROTOR: BLADE
NO BASKET
DRIVEN PULLEY
BODY S/S
INPUT/OUTPUT: 12"

MOTOR AC:
20 HP
1175 RPM
FRAME: 286T
575 VOLTS
ENCLOSURE: TEFC
3 PH, 60 HZ
19.4 AMPS

REFINER, BLACK CLAWSON, TWIN HYDRADISC, 34EM
SIZE: 34"
SN: SNC 612

RAGGER IDLER WHEEL

PULPER DRIVE - KADANT BLACK-CLAWSON - HYDRAPULPER #3
HP: 300
RATIO: 4:1
SERIAL #: P551345
*** NO INPUT SHAFT ***

HYDRAPULPER - BLACK CLAWSON - #3 DRIVE 
RATIO: 3.53:1 
REFURBISHED

PULPER DRIVE, HYDRAPULPER, KADANT, BLACK CLAWSON, SIZE 300
RATIO: 5.4:1
RATED HP: 300HP
ROTATION CCW
SERIAL #: 97 -R300-0310
INPUT SHAFT DIAMETER: 3.5", KEY WAY: 0.875"
OUTPUT SHAFT DIAMETER: 5" TO 3.875", LENGTH 15.5", KEY WAY: 1.250"

PULPER DRIVE, HYDRAPULPER, KADANT, BLACK CLAWSON, SIZE 300
RATIO: 5.4:1
RATED HP: 300HP
ROTATION CCW
SERIAL #: 96 -R300-0342
INPUT SHAFT DIAMETER: 3.5", KEY WAY: 0.875"
OUTPUT SHAFT DIAMETER: 5" TO 3.875", LENGTH 15.5", KEY WAY: 1.250"

WEAR PLATE, PULPER 3 PIECE VOKES ROTOR,
58.750" OD X 0.750" (3/4) THICK
Stainless Steel, 410 S/S
Store Surplus

ROTOR HUB, FOR VOKES ROTOR,
PULPER 3 PIECE ROTOR, KADANT BLACK CLAWSON 20', CCW, ± 87¾" - 89",
8 VANES,
Stainless Steel,
Torque pins included
Leveling screws excluded

Overall diameter: 40’’ (15’’border, 10’’shaft portion, 15’’ border)
Shaft hole: 7’’ diameter
Shaft type: Straight (not tapered)  

1 USED CONDITION

PULPER EXTRACTION PLATE, 1/2" (THE ONE ON THE BOTTOM). 
HOLES DIAMETER: 1/2". 
PLATE MATERIAL 410 S/S,
HEATED TREATED. 
EXTERNAL DIAMETER: 92.943". 
INTERNAL DIAMETER: 59". 
STORE SURPLUS

PULPER EXTRACTION PLATE, 3/8" (THE ONE ON THE TOP) HOLES DIAMETER, 
MATERIAL: 410 S/S, 
HEATED TREATED, HARDENED AND GROUND. 
EXTERNAL DIAMETER: 92.943" 
INTERNAL DIAMETER: 59" 
STORE SURPLUS

PULPER ROTOR - VOKES ROTOR - KADANT BLACK CLAWSON - 68"
STAINLESS STEEL AND HARD FACING
SUITED MODEL HYDRAPULPER # 3

PULPER ROTOR, HYDRAPULPER, KADANT, BLACK CLAWSON, SIZE 42"
ROTOR 42", 8-VANE
USED, FOR DRIVE ITEM: 62422 AND 62423
NO BAFFLES, ROTATION CCW, STAINLESS STEEL
TAPER HUB

PULPER ROTOR, HYDRAPULPER, KADANT, BLACK CLAWSON, SIZE 42"
ROTOR 42", 8-VANE
REBUILT, FOR DRIVE ITEM: 62422 AND 62423
NO BAFFLES, ROTATION CCW, STAINLESS STEEL
TAPER HUB

PULPER ROTOR - KADANT BLACK CLAWSON - 42" STAINLESS STEEL AND HARD FACING 8-VANE,
WITH BAFFLES OF 4"
SHAFT BORE DIAMETER 4.250"
ROTATION CCW
REFURBISHED STORE SURPLUS

PULPER ROTOR, BLACK CLAWSON, 42"
ONE PIECE POWR-SAVR ROTOR
8-Vane, 4" BAFFLES
Stainless Steel, Rotation CCW
BORE DIAMETER: 4.250"

PULPER - BLACK CLAWSON - 20'
CAPACITY: 425 TPD AT 3%
HYMAC TURBOFLEX RETROFIT BLACK CLAWSON
LOW CONSISTENCE, TYPE CONTINOUS 425 TPD
INTERIOR AND EXTERIOR MATERIAL: S/S
1- PULPER BOTTOM ACCEPT CHAMBER
1- PULPER IN 3 PIECES - 3 SIDES UPRIGHT
1- VOKES ROTOR, 87-87.5", 8-VANES, S/S
1- PLUG MADE OF CARBON STEEL
1- (4X) PULPER LEGS
1- WEAR PLATE
1- EXTRACTION PLATE

PULPER, HYDRAPULPER, BROCK PULPER UNIT REBUILT
12' HCV, 42" ROTOR
316 S/S TANK, 5' HIGH, ¼" SIDE THICKNESS
DRIVE ASSEMBLY DWG CA3316
6 X SUPORTING LEGS, MTL: IRON 5' HIGH
WAS USED WITH A MOTOR 250 HP 1200 RPM
TUB IN 2 SECTION BOTTOM TUB 3/8" THICKNESS, S/S
JUNK TRAP: 8"
DILUTION WATER INLET 8"
STOCK ACCEPT OUTLET: 12"
V DRIVER SHEAVE

PULPER, HYDRAPULPER, KADANT BLACK CLAWSON, SIZE 12'
IRON
S/N: P70-2984
DIAMETER: 12'
EFFECTIVE HEIGHT: 7'
PULP VOLUME: 19.8 m³
RETENTION TIME: 7 TO 9 min
OPERATION CONSISTENCY: 3.5 TO 4.5 %
CAPACITY: OCC 165 T/J

AGITATOR - BLACK CLAWSON MIXER 54" - 75 HP
MODEL: WD6-54 AGITGEC
IMPELLER NOT INCLUDED      
C/C BRG : 56"                           
BEARING TO IMPELLER CENTER : 72"                         
SHAFT TAPER AT SMALL END: APROX 3.704"     
SHAFT TAPER AT LARGE END: APROX. 4.278"
NO KEY WAY ON IMPLELLER SHAFT SIDE               
SLEEVE PACKING HAS VISIBLE WEAR       

PRESSURE SCREEN - BLACK CLAWSON - PS36
ROTOR TYPE: FOIL
BASKET TYPE : SLOTTED
SLOT SIZE: 0.35MM
P/N: 4015042-000
S/N: 5183L
BASKET DIAMETER: 36"
INT: 36" - EXT: 39-1/2" - HEIGHT: 43"
INLET: 18" - OUTLET: 18"
REJECT: 4"
CONDITION: USED

PRESSURE SCREEN - BLACK CLAWSON - PS 36
ROTOR TYPE: FOIL
BASKET TYPE : SLOTTED
SLOT SIZE: 0.35MM
P/N: 4016143
S/N: 12761
BASKET DIAMETER: 36"
INT: 36" - EXT: 39-1/2" - HEIGHT: 43"
INLET: 18" - OUTLET: 18"
REJECT: 4"
CONDITION: USED

VOKES ROTOR HUB - BLACK CLAWSON - 16'
STEEL
DIMENSION INT: 7.200" - EXT: 11.750" - BASE: 13.000"
KEY PATH: 1.500"
FOR HYDRAPULPER III
CONDITION: USED

VOKES ROTOR COVER - BLACK CLAWSON - 68"
S/S - FOR IMPELLER 68"
CONDITION: USED

PULPER SCREEN PLATE - BLACK CLAWSON - 70"
FOR 16' PULPER
S/S - 70"
MADE IN USA
CONDITION: USED

VOKES ROTOR - BLACK CLAWSON - 68"
FOR 16' PULPER
S/S - 68"
MADE IN USA
CONDITION: USED

HYDRAPULPER DRIVE - BLACK CLAWSON - SIZE 3
RATIO: 4.0:1
CONDITION: USED

HYDRAPULPER DRIVE BASE STAND BLACK CLAWSON - SIZE 3
HYDRAPULPER # 3
CONDITION: USED

SAFTY GUARD - AGITATOR AGITEC II - BLACK CLAWSON - 42"
FOR AGITATOR # 101155 - #101156 - #101157
FOR PULLEY 50" # 101181 - # 101182
STEEL
CONDITION: USED

SAFTY GUARD - AGITATOR AGITEC II - BLACK CLAWSON
FOR AGITATOR # 101155 - #101156 - #101157
FOR PULLEY 50" # 101181 - # 101182
STEEL
CONDITION: USED

SAFTY GUARD - AGITATOR AGITEC II - BLACK CLAWSON - 42"
FOR AGITATOR # 101155 - #101156 - #101157
FOR PULLEY 50" # 101181 - # 101182
STEEL
CONDITION: USED

AGITATOR - BLACK CLAWSON - AGITEC II - 42"
# SERIAL: 94 NY 5889
SHAFT AT IMPELLER: 3.344"
SHAFT AT COUPLING: 3.940"
KEY PATH: 1" X 8"
SLEEVE: 4.452"
# BEARING CARTRIDGE: SAF 622
SAFTY GUARD - AGITATOR AGITEC II - BLACK CLAWSON: **SKU 101189**
CONDITION: USED

AGITATOR - BLACK CLAWSON - AGITEC II - 42"
# SERIAL: 94 NY 5888
SHAFT AT IMPELLER: 3.344"
SHAFT AT COUPLING: 3.940"
KEY PATH: 1" X 8"
SLEEVE: 4.452"
# BEARING CARTRIDGE: SAF 622
SAFTY GUARD - AGITATOR AGITEC II - BLACK CLAWSON: **SKU 101188**
CONDITION: USED

AGITATOR - BLACK CLAWSON - AGITEC II - 42"
# SERIAL: 94 NY 5887
SHAFT AT IMPELLER: 3.344"
SHAFT AT COUPLING: 3.940"
KEY PATH: 1" X 8"
SLEEVE: 4.452"
# BEARING CARTRIDGE: SAF 622
SAFTY GUARD - AGITATOR AGITEC II - BLACK CLAWSON: **SKU 101187**
CONDITION: USED

DRIVE - HYDRAPULPER - BLACK CLAWSON - SIZE 3
MODEL: NO.3 - D.IRON
RATIO: 4:0.1
SERIAL: 98-R3-3007
CONDITION: USED

REJECT JUNK TRAP - KADANT BLACK CLAWSON - UV-200
EXIT: 4"
DI
CONDITION: USED

REJECT JUNK TRAP - KADANT BLACK CLAWSON - UV-200
EXIT: 4"
IRON
CONDITION: USED

PRESSURE SCREEN - KADANT BLACK CLAWSON - UV-200
ROTOR TYPE: FOIL-4
BASKET TYPE: SLOTTED
P/N: FW1002M3C4P06508W31
# MODEL: 95-UV200-7935
# SERIAL: 3603991
REJECT: 4"

PREVIOUSLY USED WITH MOTOR - RELIANCE - AC (SKU-50579)
100HP
1188RPM
FRAME: 444T
ENCLOSURE: TEFC
VERTICAL MOUNTING POSITION
APPLICATION: BELT
MADE IN USA
WEIGHT: 5910LBS
CONDITION: USED

PRESSURE SCREEN - KADANT BLACK CLAWSON - UV-200
ROTOR TYPE: FOIL-4
BASKET TYPE: SLOTTED
SLOTS WIDTH: 0.008"
# MODEL: UV- 200-9202
REJECT: 4"

PREVIOUSLY USED WITH MOTOR - MARATHON - AC (SKU-50577)
60HP
1185RPM
FRAME: 365T
VOLTS: 480
ENCLOSURE: TEFC
VERTICAL MOUNTING POSITION
APPLICATION: BELT
MADE IN USA
WEIGHT: 5910 LBS
CONDITION: USED

IMPELLER - AGITATOR - BLACK CLAWSON - 52"
STAINLESS STEEL
52" - 3 BLADES
SHAFT 5"1/2
WEIGHT: 550 LBS
OVERALL DIMENSIONS: 52"X10"
CONDITION: USED

IMPELLER - AGITATOR - BLACK CLAWSON - 32"
STAINLESS STEEL
32" - 3 BLADES
SHAFT 2"9/16
MADE IN: USA
WEIGHT: 105 LBS
OVERALL DIMENSIONS: 32"X10"
CONDITION: USED