Stock prep equipment

MECHANICAL SEAL PARTS FOR PRESSURE SCREEN  - VOITH 30
CONDITION: USED

PRESSURE SCREEN - BIRD STB900
Empty Body

BROKE PULPER - BELOIT - SHARK 3796 
TURNS COUNTER CLOCKWISE 
IMPELLER DIA: 44", S/S, 6-VANE 
HOLE DIA: 5/8" 
PLATE WITH HEAT TREATMENT 
SERIAL #: EO 4511 
COND: 10% 
. 
PULLEY DIA: 44.5" WITH 8 BELTS

BROKE PULPER - BELOIT - SHARK 3796 
TURNS CLOCKWISE 
IMPELLER DIA: 44", S/S, 6-VANE 
HOLE DIA: 5/8" 
PLATE WITH HEAT TREATMENT 
SERIAL #: 97H348-01 
. 
PULLEY DIA: 44.5" WITH 8 BELTS

AGITATOR - BLACK CLAWSON MIXER 54" - 75 HP
MODEL: WD6-54 AGITGEC
IMPELLER NOT INCLUDED      
C/C BRG : 56"                           
BEARING TO IMPELLER CENTER : 72"                         
SHAFT TAPER AT SMALL END: APROX 3.704"     
SHAFT TAPER AT LARGE END: APROX. 4.278"
NO KEY WAY ON IMPLELLER SHAFT SIDE               
SLEEVE PACKING HAS VISIBLE WEAR       

AGITATOR
MODEL
IMPELLER SS 3 PALM 22.000"

AGITATOR HYMAC MIXER, 30"
MODEL: 30 FB 2025
WITHOUT IMPELLER

AGITATOR MOTOR (STORE SURPLUS) 1 HP LEESON C6K11FB2C
1HP
1140RPM
VOLTS: 115
60 HZ
FRAME : J56H
SERIAL # C6K11FB2C
CAT#l: 110410.00

AGITATOR; LIGHTNIN; 2-VS-15
HP:15 RPM:1800 IN
P.D. DRIVEN SHEAVE:4.75 RPM:333 OUT
P.D. DRIVEN SHEAVE:25.0 BELT SIZE:3V900
RPM:1200 IN

AGITATOR - LIGHTNIN - 2-VS-40
TYPE: HORIZONTAL
- WITHOUT IMPELLER

- WITHOUT MOTOR:
40 HP
INPUT: 1750 RPM, OUTPUT: 335 RPM
BELT SIZE: 5V1400
MADE IN TORONTO, ONTARIO

AGITATOR LIGHTNIN SGS-75
HP:3/4 RPM:1725
MODEL:976-90A IMPELLER:14.000"
MOTOR SERIE:171469

AGITATOR - LIGHTNIN VSE-15
S/N 59003
MODEL: VSE-15
HP 15
BELT B-90
INPUT RPM 1750
OUTPUT RPM 420
IMPELLER, SS, 3 PALM, 21"
P.D. DRIVE SHEAVE 6"
P.D. DRIVEN SHEAVE 25"

AGITATOR LIGHTNIN VSE-15
SERIAL #: 590032 MODEL: VSE-15
HP 15 BELT: B-90
INPUT: RPM 1750 OUTPUT: RPM 420
IMPELLER S/S 3 PALM, 21"
P.D. DRIVE SHEAVE 6"
P.D. DRIVEN SHEAVE 25"

AGITATOR LIGHTNIN XJ-65
RPM:1725/1425 SER:89/809014
MOTOR .65 HP SER. NO.:B77R3046M-RQ
VOLTS:208-220/440 AMPS:2.4-2.4/2.2
SHAFT DIAM.:13/16" LONG:31"
3 PALES 10" DIAM.
FRAME:FM56C

AGITATOR; LIGHTNIN; XJ-65
RPM:1725/1425 SER:90/80914
MOTOR .65 HP SER:5K43NG6426V
VOLTS:208-220/440 AMPS:2.5-2.4/1.2
S.F.:1.15 HZ:60/50

AGITATOR MOTOR LIGHTNIN N-C-4
TAMPER 1/4 HP
1725RPM
VOLTS: 115/230
AMP: 4.6/2.3
MODEL: 945-90-A
AGITATOR SERIAL #: 271139X

AGITATOR MOTOR, LIGHTNIN ND 2A
MOTOR: 3/4 HP
RPM: 1725
BATIT: M56C
VOLTS: 550
AMP: 1.38
TYPE P
I.D. 429195SC-13
AGITATOR
SERIAL #; 771023X

MOTOR AGITATOR NEPTUNE AG-1.0
MOTOR 1/4 HP
RPM: 1725
VOLTS: 115/230
AGITATOR
SERIAL #: 53136
RPM: 350

AGITATOR MIXPRO 20 VST
MODEL: 20 VST
IMPELLER DIA: 21.5", 3 BLADES, S/S
332RPM
SERIAL#: U01C001-01A
SHAFT LENGTH: 20"

***NO MOTOR***, RELIANCE
LAST USED WITH 5HP MOTOR
FRAME: L184T
DRIVE (MOTOR) PULLEY: 3.5", 3.5-3V-3-QN
DRIVEN (AGITATOR) PULLEY: 19", 19.0-3V-3-SF

MECHANICAL SEAL, JOHN CRANE, 3.750"
MATERIAL CODE: Q/BD/F51015*118-8
DRAWNIG #: D-3750-548
PART #: B215-18
FOR AGITATOR

DEFLAKER VOITH 5723
SHAFT IRON
MECHANICAL SEAL
MADE IN GERMANY 1984
PLATE CONDITION: 5%

DISPERGER, SHINAMA, MODEL: CCE-8-1200
KNEADING MACHINE
CAPACITY: 230 TPD @ 30% CONSISTENCY
POWER : 900 KW = 1200HP
DATE : SEPT. 1994

1x Gear box inicluded.

RING, SULZER ESCHER WYSS, HD3 DISPERGER
ROTOR HOLDING RING, D978/460X32
PARTS#: 4460204
DIM; 978X460X32
POS: 204

BROKE PULPER 34"
VOKES STYLE ROTOR, C.W.
STAINLESS CONSTRUCTION PREVIOUSLY USED AS DRY END OR WET END, PAPER REPULPER

PULPER, HYDRAPULPER, KADANT BLACK CLAWSON, SIZE 12'
IRON
S/N: P70-2984
DIAMETER: 12'
EFFECTIVE HEIGHT: 7'
PULP VOLUME: 19.8 m³
RETENTION TIME: 7 TO 9 min
OPERATION CONSISTENCY: 3.5 TO 4.5 %
CAPACITY: OCC 165 T/J

PULPER HYDRAULIC MACHINERY 12', 4322
144" DIAMETER 96" DEEP
INT.: STAINLESS STEEL
EXT.:STAINLESS STEEL
RATIO: 4/1
IN 3 SECTION

PULPER, HYDRAPULPER, BROCK PULPER UNIT REBUILT
12' HCV, 42" ROTOR
316 S/S TANK, 5' HIGH, ¼" SIDE THICKNESS
DRIVE ASSEMBLY DWG CA3316
6 X SUPORTING LEGS, MTL: IRON 5' HIGH
WAS USED WITH A MOTOR 250 HP 1200 RPM
TUB IN 2 SECTION BOTTOM TUB 3/8" THICKNESS, S/S
JUNK TRAP: 8"
DILUTION WATER INLET 8"
STOCK ACCEPT OUTLET: 12"
V DRIVER SHEAVE

PULPER, KVAERNER HYMAC, 16-3B-56
16' DIA X 12' HIGH
EXTRACTION PLATE: 22.7% OPEN AREA, 5/8" HOLE, D-037337, HD037337
COMPLETE DRIVE 3B, D-16586, BEARING HOUSING WITH HUB ADAPTOR
75" DIAMETER SHEAVE, 8V, 10 GR
56" ROTOR D-029254 - HD029254, 6 BAFFLES RELATED TO OUR ITEM # 58095
4 LEGS

CAPACITY 400 ADTPD CONTINUOUS
5 TO 15 MIN PULPING TIMES
CONSISTENCY ± 6%

MOTOR VERTICAL MOUNT
400 HP
885 RPM
FRAME: 589 VZ
2300 VOLTS
21" DIA SHEAVE, 8V, 10 GR

SAFETY GUARDS EXCLUDED

PULPER - BLACK CLAWSON - 20'
CAPACITY: 425 TPD AT 3%
HYMAC TURBOFLEX RETROFIT BLACK CLAWSON
LOW CONSISTENCE, TYPE CONTINOUS 425 TPD
INTERIOR AND EXTERIOR MATERIAL: S/S
1- PULPER BOTTOM ACCEPT CHAMBER
1- PULPER IN 3 PIECES - 3 SIDES UPRIGHT
1- VOKES ROTOR, 87-87.5", 8-VANES, S/S
1- PLUG MADE OF CARBON STEEL
1- (4X) PULPER LEGS
1- WEAR PLATE
1- EXTRACTION PLATE

PULPER ROTOR, BLACK CLAWSON, 42"
ONE PIECE POWR-SAVR ROTOR
8-Vane, 4" BAFFLES
Stainless Steel, Rotation CCW
BORE DIAMETER: 4.250"

PULPER ROTOR - KADANT BLACK CLAWSON - 42" STAINLESS STEEL AND HARD FACING 8-VANE,
WITH BAFFLES OF 4"
SHAFT BORE DIAMETER 4.250"
ROTATION CCW
REFURBISHED STORE SURPLUS

PULPER ROTOR, HYDRAPULPER, KADANT, BLACK CLAWSON, SIZE 42"
ROTOR 42", 8-VANE
REBUILT, FOR DRIVE ITEM: 62422 AND 62423
NO BAFFLES, ROTATION CCW, STAINLESS STEEL
TAPER HUB

PULPER ROTOR, HYDRAPULPER, KADANT, BLACK CLAWSON, SIZE 42"
ROTOR 42", 8-VANE
USED, FOR DRIVE ITEM: 62422 AND 62423
NO BAFFLES, ROTATION CCW, STAINLESS STEEL
TAPER HUB

PULPER ROTOR - VOKES ROTOR - KADANT BLACK CLAWSON - 68"
STAINLESS STEEL AND HARD FACING
SUITED MODEL HYDRAPULPER # 3

PULPER EXTRACTION PLATE, 3/8" (THE ONE ON THE TOP) HOLES DIAMETER, 
MATERIAL: 410 S/S, 
HEATED TREATED, HARDENED AND GROUND. 
EXTERNAL DIAMETER: 92.943" 
INTERNAL DIAMETER: 59" 
STORE SURPLUS

PULPER EXTRACTION PLATE, 1/2" (THE ONE ON THE BOTTOM). 
HOLES DIAMETER: 1/2". 
PLATE MATERIAL 410 S/S,
HEATED TREATED. 
EXTERNAL DIAMETER: 92.943". 
INTERNAL DIAMETER: 59". 
STORE SURPLUS